During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: 'link' may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (link) {
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Approved by: imp
Obtained from: DPDK (46136031f19107f4e9b6b3a952cb7f57877a7f0f)
MFC after: 1 week
(cherry picked from commit 089cdb3990)
In function e1000_update_mc_addr_list_vf(), "msgbuf[0]" is used prior
to initialization at "msgbuf[0] |= E1000_VF_SET_MULTICAST_OVERFLOW".
And "msgbuf[0]" is overwritten at "msgbuf[0] = E1000_VF_SET_MULTICAST".
Fix it by moving the second line prior to the first one that mentioned
above.
Fixes: dffbaf7880a8 ("e1000: revert fix for multicast in VF")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Approved by: imp
Obtained from: DPDK (f58ca2f9ef6)
MFC after: 1 week
(cherry picked from commit ecf2a89a99)
This fixes the timed out for shadow RAM write EEWR can't be detected.
Fixes: 5a32a257f957 ("e1000: more NICs in base driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (4a8ab48ec47b3616272e50620b8e1a9599358ea6)
MFC after: 1 week
(cherry picked from commit f6517a7e69)
Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (cf1f3ca45d33e793ca581200b4000c39a798113e)
MFC after: 1 week
(cherry picked from commit e8e3171d99)
Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2c7fe65ab9a31e6ebf438dad7ccc59bcde83a89f)
MFC after: 1 week
(cherry picked from commit 09888d4bc1)
Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (df01c0ee277d51f81d7d72501dba97550d3b6c4a)
MFC after: 1 week
(cherry picked from commit d1c37752e2)
This code is required for the update for system clock.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (3f0188c8f29847038bc9f306b2570ace57e3811c)
MFC after: 1 week
(cherry picked from commit 1883a6ff3b)
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
(cherry picked from commit 6b9d35fac1)
Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.
Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (b8592c89c8fbc871d22313dcac0b86c89a7d5a62)
MFC after: 1 week
(cherry picked from commit 6c59e1866c)
Copyrights in sync with "cid-gigabit.2020.06.05.tar.gz released by ND"
(from DPDK).
README from the latest em-7.7.8 on intel.com
Approved by: imp
MFC after: 1 week
(cherry picked from commit 702cac6c6b)
Although it is not specified in the RFCs, the concept that
the NFSv4 server should reply to an RPC request within a
reasonable time is accepted practice within the NFSv4 community.
Without this patch, the NFSv4.2 server attempts to reply to
a Copy operation within 1second by limiting the copy to
vfs.nfs.maxcopyrange bytes (default 10Mbytes). This is crude at
best, given the large variation in I/O subsystem performance.
This patch adds a kernel only flag COPY_FILE_RANGE_TIMEO1SEC
that the NFSv4.2 can specify, which tells VOP_COPY_FILE_RANGE()
to return after approximately 1 second with a partial result and
implements this in vn_generic_copy_file_range(), used by
vop_stdcopyfilerange().
Modifying the NFSv4.2 server to set this flag will be done in
a separate patch. Also under consideration is exposing the
COPY_FILE_RANGE_TIMEO1SEC to userland for use on the FreeBSD
copy_file_range(2) syscall.
Although this technically does change the VFS/VOP KAPI, I do not
think the MFC will cause problems.
(cherry picked from commit c5128c48df)
Currently hkbd counts all key states to be "Up" at the start of
interrupt callback. That results in generation of "Key Up" event for
each key that has been downed before but is not listed in current
report while is still downed.
Fix that with clearing of temporary key data storage bits only for
keys contained in processed report.
Reported by: Greg V
Obtained from: sysutils/iichid
(cherry picked from commit 598f0580f6)
r123442 introduced solution for clamping of PS/2 mice jitter when using
a KVM. Solution is to buffer mouse packets for 0.050ms if mouse activity
has not been seen for more than 0.5 seconds. Then flush that data to driver
if no validation errors found or drop the entire queue otherwise.
While it works well with relative devices it has issues with absolute ones
Depending on history buffering may results in delaying of the touch front
edge for 0.050ms that affects gesture processing (tap detection).
As absolute touchpads usually are built-in devices we can safely disable
bufferization and KVM jitter clamping to avoid such a delays.
(cherry picked from commit bedf31ad7e)
Move all the new elemenets to the end of the structure for 13. We
allocate this inside the linuxkpi code, so the size isn't enccoded in
client modules. However, the offsets to the different fields are
encoded. Tihs modifies 04456f7118, 40a215e38a, and 3a606aadf2
and will likely create merge conflicts there (and that's a good thing
since the elements need to be moved to the end of the structure when
merging).
Tweak irq_ent to be binary compatible. Since this is inlined into the
clients, all clients have to agree on the irq_ent offsets.
Restore visibility to linux_kmem_cache_free_rcu
linux_kmem_cache_free_rcu was made static in 10235ad056, however
client drivers depended on calling it directly. Make it visible again to
restore the 13.0-Release KBI for linuxkpi.
Bump FreeBSD_version to 1300515 for restoration of 13.0 KBI. Since this
commmit changes the linuxkpi KBI (this time back to 13.0 release to
restore the status quo of), you'll need to recompile everything that
uses it (you needed to earlier as well, but those were silent
recompilation events). The plus side is that our packages (built using
13.0) for drm-kmod 5.4 work again on -stable systems.
Reviewed by: bz, wulf
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31363
Linux fails to build now because the mkdtemp in the bootstrapped
environment wants 6 or more X's. Use 10 out of an abundance of caution.
Sponsored by: Netflix
Reviewed by: arichards
Differential Revision: https://reviews.freebsd.org/D31863
(cherry picked from commit ecfbb2e302)
Since we take a lock when we enter the ioctl, we need to set driver_mtx
in the pps structure so it can be dropped while sleeping during a call
to timepps_fetch() with a non-zero timeout (PPS_CANWAIT feature).
MFC After: 5 days
Sponsored by: Netflix
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D31763
(cherry picked from commit c62aa65b2a)
These two ioctls are not part of the current version of OSS and were
considered obsolete. However, their behaviour is not the same as their
old one, so this implementation is specific to FreeBSD.
Older OSS versions had the MUTE ioctls take and return an integer with
a value of 0 or 1, which meant that the _whole_ mixer is unmuted or
muted respectively. In my implementation, the ioctl takes and returns
a bitmask that tells us which devices are muted.
This allows us to mute and unmute only the devices we want, instead of the
whole mixer. The bitmask works the same way as in DEVMASK, RECMASK and
RECSRC.
Integrated the hardware volume feature with the new mute system.
Submitted by: Christos Margiolis <christos@freebsd.org>
Differential Revision: https://reviews.freebsd.org/D31130
MFC after: 1 week
Sponsored by: NVIDIA Networking
(cherry picked from commit 0f8dafb458)
While at it only output driver version to dmesg(8) when hardware is present.
Differential Revision: https://reviews.freebsd.org/D29100
MFC after: 1 week
Reviewed by: kib and markj
Sponsored by: NVIDIA Networking
(cherry picked from commit d2cbfbc57b)
"maximum number of contacts" usages.
Assume touchpad to be a clickpad if it has only internal button.
Set number of contacts to 5 for touchpads and to 10 for touchscreens.
Check for fetched report length to avoid reading of stalled data.
Fixes Dell Precision 7550 laptop.
Tested by: Shawn Webb <shawn.webb_AT_hardenedbsd_DOT_org>
PR: 257992
(cherry picked from commit 9d04336b61)
If HID usage is mapped to evdev event by hidmap item marked with this
flag than entire driver attachment is blocked.
(cherry picked from commit cded1fdb37)
In Serial mode, each packet contains information that describes a
single physical contact point. Multiple contacts are streamed
serially. In this mode, devices report all contact information in a
series of packets. The device sends a separate packet for each
concurrent contact.
Serial packet reporting mode is used by post-2014 eGalax touchscreens.
Tested by: Mark Kane <mark_AT_kane_DOT_mn>
(cherry picked from commit 0075742d18)
They are true multitouch internally but Synaptics PS/2 protocol
limitations do not all allow to export touch identificators.
(cherry picked from commit c21171af68)
