This fixes kernel panic during boot, caused by incompatibility of recent
CAM locking changes and this bus scanner code.
Submitted by: Microsoft
MFC after: 1 week
Centrino 2230 firmware.
This fixes the general statistics block to be actually valid.
I've verified this by contrasting the output of iwnstats before and
after the change. The general block is now correct.
Tested:
* Intel 5100 (old format stats message)
* Intel 2230 (new format stats message)
(pvid=1) and we already configure them to send to other ports.
Setting pvid=portnum would mean that there were separate vlangroups
for each ports, but 'leaking' into other ports. The result? All port
traffic flooded to all other port traffic.
Tested:
* DB120, AR9344 + AR8327 switch
The OpenWRT AR8xxx switch support flushes the ATU (address translation
unit) after each port link 'up' status change. I've modified this to
just flush on any port transition.
Whilst here, bump the number of ports on the AR8327 to 6, rather than
the default of 5. It's DB120 specific; I'll go and make this configurable
later.
There's some debugging code in here still; I am still debugging whether
this is or isn't working fully.
Tested:
* DB120, AR9344 + AR8327 switch
Obtained from: OpenWRT
This patch does four things:
* it globally disables mirroring;
* it globally sets the mirroring on each port to be disabled;
* the initial port setup now programs a portmask for the port to allow
transmission (forwarding) to all other ports bar itself;
* the vlan setup path now programs the portmask for the port to
allow transmission (forwarding) to all other ports bar itself.
Before this, I hard-coded the portmask to 0x3f which would mean all
ports (bar port 6, which currently isn't hooked up to anything.)
This means that traffic would be duplicated back out the port it
received it. I bet this wasn't .. optimal.
In any case, this _seems_ to make DHCP from my macosx laptop
work through this access point. I'll do some further testing
to ensure it's actually working correctly on all my devices.
Tested:
* DB120, AR8327 switch
It turns out that there's a variant format of the RX statisitcs notification
from the intel firmware. It's even more whacked - the non-BT variant has
bluetooth fields; apparently some later NICs return even _more_ bluetooth
related fields.
I'll commit the statistics structure changes here - it's a no-op for the
driver. I'll later teach the driver code to populate a statistics structure
from the received message after reformatting things correctly.
I don't _think_ it's going to fix anything related to sensitivity programming
as the CCK/OFDM (non-11n) fields are in the same place for both formats.
But the HT structure and the general statistics aren't in the same place.
I'll go find some NIC(s) that spit out the other format and when I find one,
I'll go and update the driver to handle things correctly.
Tested:
* Intel 5100 (which returns the legacy, non-BT format)
Obtained from: Linux iwlwifi
match the device. Pinctrl will need to be added before this will work,
in addition to migrating the current board_foo.c method of configuring
these pins to something else. Non-FDT systems won't be affected, yet.
In my specific case, this fixes the problem of my PowerMac G5 displaying a
4:3 console on a 16:10 display with black bars on the left and right.
PR: kern/180558
Reviewed by: nwhitehorn
MFC after: 5 days
1) Add support for page back/forward.
2) While doing HOR scrolling, disable VER scrolling.
3) Checking dx_sum and dy_sum before emulate right button, this can
avoids unexpected right button press.
4) Fix stable pointer operation when emulating middle button.
Submitted by: Huang Wen Hui <huanghwh@gmail.com>
MFC after: 2 weeks
It's still hardcoded (for db120) but it is now hardcoded in all the
same place (ie, the pdata path.) The port config/status code now checks
port0/port6 as appropriate to configure things.
Tested:
* Qualcomm Atheros DB120, AR8327 switch.
This is (almost!) enough to actually probe, attach, configure a default
port group and do some basic work. It's also totally hard-coded for
the Qualcomm Atheros DB120 board - it doesn't yet have any of the code
from OpenWRT which parses extra configuration data to know how to program
the switch. The LED stuff is also missing.
But, it's enough to facilitate board, PHY, switch and VLAN bringup,
so I am committing it now.
Tested:
* Qualcomm Atheros DB120
Obtained from: OpenWRT
