Rather than repeatedly nesting loops, separate concerns with a single loop
per call stack level. Use a table to drive the recursive routine. Handle
missing topology layers more gracefully (infer a single unit).
Analyze some additional optional layers which may be present on e.g. AMD Zen
systems (groups, aka dies, per package; and cachegroups, aka CCXes, per
group).
Display that additional information in the boot-time topology information,
when it is relevent (non-one).
Reviewed by: markj@, mjoras@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12019
sysctls to display stats, stats polled every 2 seconds
Modify QLA_LOCK()/QLA_UNLOCK() to not sleep after acquiring mtx_lock
Add support to turn OFF/ON error recovery following heartbeat failure for
debug purposes.
Set default max values to 32 Tx/Rx/SDS rings
MFC after:5 days
The full system memory barrier around a TLB invalidation is stricter than
required. It needs to wait on accesses to main memory, with just the weaker
store variant before the invalidate. As such use the dsb istst, tlbi, dlb
ish sequence already used in pmap.
The tlbi instruction in this sequence is also unnecessarily using a
broadcast invalidate when it just needs to invalidate the local CPUs TLB.
Switch to a non-broadcast variant of this instruction.
Sponsored by: DARPA, AFRL
Right now, we enable the CR4.FSGSBASE bit on CPUs which support the
facility (Ivy and later), to allow usermode to read fs and gs bases
without syscalls. This bit also controls the write access to bases
from userspace, but WRFSBASE and WRGSBASE instructions currently
cannot be used, because return path from both exceptions or interrupts
overrides bases with the values from pcb.
Supporting the instructions is useful because this means that usermode
can implement green-threads completely in userspace without issuing
syscalls to change all of the machine context.
Support is implemented by saving the fs base and user gs base when
PCB_FULL_IRET flag is set. The flag is set on the context switch,
which potentially causes clobber of the bases due to activation of
another context, and when explicit modification of the user context by
a syscall or exception handler is performed. In particular, the patch
moves setting of the flag before syscalls change context.
The changes to doreti_exit and PUSH_FRAME to clear PCB_FULL_IRET on
entry from userspace can be considered a bug fixes on its own.
Reviewed by: jhb (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12023
softdep_count_dependencies().
Buffer's b_dep list is protected by the SU mount lock. Owning the
buffer lock is not enough to guarantee the stability of the list.
Calculation of the UFS mount owning the workitems from the buffer must
be much more careful to not dereference the work item which might be
freed meantime. To get to ump, use the pointers chain which does not
involve workitems at all.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When a security policy should match TCP connection with specific ports,
the SYN+ACK segment send by syncache_respond() is considered as forwarded
packet, because at this moment TCP connection does not have PCB structure,
and ip_output() is called without inpcb pointer. In this case SPIDX filled
for SP lookup will not contain TCP ports and security policy will not
be found. This can lead to unencrypted SYN+ACK on the wire.
This patch restores the old behavior, when ports will not be filled only
for forwarded packets.
Reported by: Dewayne Geraghty <dewayne.geraghty at heuristicsystems.com.au>
MFC after: 1 week
Deadlock condition:
The return value of TDQ_LOCKPTR(td) is the same for two threads.
1) The first thread signals a wakeup while keeping the rcu_read_lock().
This invokes sched_add() which in turn will try to lock TDQ_LOCK().
2) The second thread is calling synchronize_rcu() calling mi_switch() over
and over again trying to yield(). This prevents the first thread from running
and releasing the RCU reader lock.
Solution:
Release the thread lock while yielding to allow other threads to acquire the
lock pointed to by TDQ_LOCKPTR(td).
Found by: KrishnamRaju ErapaRaju <Krishna2@chelsio.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Currently several paths in the NFS client upgrade the shared vnode
lock to exclusive, which might cause temporal dropping of the lock.
This action appears to be fatal for nullfs mounts over NFS. If the
operation is performed over nullfs vnode, then bypassed down to NFS
VOP, and the lock is dropped, other thread might reclaim the upper
nullfs vnode. Since on reclaim the nullfs vnode lock and NFS vnode
lock are split, the original lock state of the nullfs vnode is not
restored. As result, VFS operations receive not locked vnode after a
VOP call.
Stop upgrading the vnode lock when we check the consistency or flush
buffers as result of detected inconsistency. Instead, allocate a new
lockmgr lock for each NFS node, which is locked exclusive instead of
the vnode lock upgrade. In other words, the other parallel
modification of the vnode are excluded by either vnode lock conflict
or exclusivity of the new lock when the vnode lock is shared.
Also revert r316529 because now the vnode cannot be reclaimed during
ncl_vinvalbuf().
In collaboration with: pho
Reviewed by: rmacklem
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12083
This mode allows other clean buffers to arrive while we flush the buf
lists for the vnode, which is fine for the targeted use. We only need
that all buffers existed at the time of the function start were
flushed. In fact, only one assert has to be relaxed.
In collaboration with: pho
Reviewed by: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12083
- Use more relevant name 'signo' instead of 'i' for the local variable
which contains a signal number to send for the current exception.
- Eliminate two labels 'userout' and 'out' which point to the very end
of the trap() function. Instead use return directly.
- Re-indent the prot_fault_translation block by reducing if() nesting.
- Some more monor style changes.
Requested and reviewed by: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This information is normally available via acpi_perf, but in case it is not,
add support for fetching the information via MSRs on AMD family 17h (Zen)
processors. Zen uses a slightly different formula than previous generation
AMD CPUs.
This was inspired by, but does not fix, PR 221621.
Reported by: Sean P. R. <seanpr AT swbell.net>
Reviewed by: mjoras@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12082
There was already a per-vty defaults field, but it was useless since it was
only initialized when propagating the global settings and thus no different
from the current global settings and not per-vty. The global defaults field
was also invariant after boot time, but not quite so useless.
Fix this by adding a second selection bit the the control flags of the
relevant ioctl(). vidcontrol doesn't support this yet. Setting either
default propagates the change to the current setting for the same level
and then to all lower levels.
Improve the 3-way escape sequence used by termcap to control the cursor.
The "normal" (ve) case has always used reset, so the user could set
it to anything, but since the reset is to a global value this is not
very useful, especially since the "very visible" (vs) case doesn't
reset but inconsistently forces to a blinking block. Change vs to
first reset and then XOR the blinking bit so that it is predictably
different from ve.
attribute field is curs_attr. The base field holds user data translated
in a reversible way and is needed because current field holds this in
an irreversible way for efficiency.
Factor out some common code for the reversible translation. This is
slightly simpler now, and much easier to expand.
Translate the magic flags value -1 to a single control flag internally
up front so other flags can be trusted later. This can be used for the
relevant ioctl() too.
Remove CONS_CURSOR_FLAGS which contained all the control flags. It was
unused and not useful. After adding more flags, there will be tests on
a couple at a time but never on them all. This API should have used this
to disallow unknown flags.
Make sure that %eflags.D flag is cleared for hook.
Improve comments.
When #UD dtrace code checks for a registered hook before checking that
the exception was raised from kernel mode, we might run with the user
%ds, trapping on access. Exception entry from userspace automatically
load valid %ss, which we can use there instead.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
redundant initializations.
Hard-code base = 0, height = (approx. 1/8 of the boot-time font height)
in all cases, and remove the BIOS/MD support for setting these values.
This asks for an underline cursor sized for the boot-time font instead
of various less hard-coded but worse values. I used that think that
the x86 BIOS always gave the same values as the above hard-coding, but
on 1 of my systems it gives the wrong value of base = 1.
The remaining BIOS fields are shift_state and bell_pitch. These are now
consistently not explicitly reinitialized to 0. All sc_get_bios_value()
functions except x86's are now empty, and the only useful thing that x86
returns is shift_state. This really belongs in atkbdc, but heavier
use of the BIOS to read the more useful typematic rate has been removed
there. fb still makes much heavier use of the BIOS.
Using latest U-Boot for RPI 1 or 2 the DTB loaded by the firmware is discarded.
The DTB was previously patched by the firmware to contain the DMA channel mask.
DTB provided by the rpi firmware or DTS in the Linux tree contain the raw value
directly. Do the same for our DTS as we cannot switch to the upstream ones yet.
Not having the DMA channel mask setup properly cause mmc not to be detected
(and probably other problems on driver using DMA).
Also, add links for rpi dtb to the name used by u-boot. This way the dtb can be
loaded by ubldr using the U-Boot env variable fdtfile.
Tested On: RPI B Rev2, RPI Zero, RPI 2 v1.1 RPI 2 v1.2
Thanks to Sylvain Garrigues <sylvain@sylvaingarrigues.com> for the help.
PR: 218344
Drop the EARLY_AP_STARTUP gtaskqueue code, as gtaskqueues are now
initialized before APs are started.
Reviewed by: hselasky@, jhb@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12054
exception did not happen in vm86 mode. A vm86 userland process could
have a %cs that matches GSEL_KPL, while dtrace cannot hook it.
Submitted by: Maxime Villard <max@m00nbsd.net>
MFC after: 3 days
was aliased to a vt sequence, causing and fixing various bugs.
For syscons, this restores support for arg 2 which sets blinking block
too forcefully, and restores bugs for arg 0 and 1. Arg 2 is used for
vs in the cons25 entry in termcap, but I've never noticed an application
that uses this. The bugs involve replacing local settings by global
ones and need better handling of defaults to fix.
For vt, this requires moving the aliasing code from teken to vt where
it belongs. This sequences is very important for cons25 compatibility
in vt since it is used by the cons25 termcap entries for ve, vi and
vs. vt can't properly support vs for either cons25 or xterm since it
doesn't support blinking. For xterm, the termcap entry for vs asks
for something different using 12;25h instead of 25h.
Rename C25CURS for this to C25LCT and change its description to be closer
to echoing the old comment about it. CURS is too generic.
Fix missing syscons escape sequence for setting the global cursor shape
(and type). Only support this in syscons since vt can't emulate anything
in it.
In a recent commit, I forgot to expand an X to an abbreviation of "BORDER".
Fix this and some nearby bad names.
The descriptions were copied from comments in scterm-sc.c, but some
of these are bad. The border [color] was inconsistently described as
a property of the "display", but I had changed this to "adapter" to
match the descriptions for other color settings. All colors supported
by the cons25 sequences are actually properties of the current vty and
that should not be described. But the other colors are defaults.
Change "adapter" to "default" for them and remove "adapter" for the
border. Reduce the verbosity of the abbreviation from AD to D.
It should toggle between 2 states, but it used a cut-down version of
support for a related 3-state syscons escape sequence and inherited
bugs from that. The usual misbehaviour was that hiding and showing
the cursor reset it to a global default.
Support for the 3-state sequence remains broken by aliasing to the 2-state
sequence. This works better but incompatibly for the 2 cases that it
supports.
Make sure that the flags INP_IPV4 and INP_IPV6 are consistently set
for inpcbs used for TCP sockets, no matter if the setting is derived
from the net.inet6.ip6.v6only sysctl or the IPV6_V6ONLY socket option.
For UDP this was already done right.
PR: 221385
MFC after: 1 week
Right now we only need to pad when writing kernel dump headers, so
flatten three related subroutines into one. The encrypted kernel dump
code already writes out its key in a dumper.blocksize-sized block.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11647
This helps simplify the code in kern_shutdown.c and reduces the number
of globally visible functions.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11603
dump_start() and dump_finish() are responsible for writing kernel dump
headers, optionally writing the key when encryption is enabled, and
initializing the initial offset into the dump device.
Also remove the unused dump_pad(), and make some functions static now that
they're only called from kern_shutdown.c.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11584
sbuf is filled to capacity by vsnprintf(), the loop exits without error, and
the sbuf is not marked as auto-extendable.
SBUF_HASROOM() evaluates true if there is room for one or more non-NULL
characters, but in the case that the sbuf was filled exactly to capacity,
SBUF_HASROOM() evaluates false. Consequently, sbuf_vprintf() incorrectly
assigns an ENOMEM error to the sbuf when in fact everything is fine, in turn
poisoning the buffer for all subsequent operations.
Correct by moving the ENOMEM assignment into the loop where it can be made
unambiguously.
As a related safety net change, explicitly check for the zero bytes drained
case in sbuf_drain() and set EDEADLK as the error. This avoids an infinite loop
in sbuf_vprintf() if a drain function were to inadvertently return a value of
zero to sbuf_drain().
Reviewed by: cem, jtl, gallatin
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D8535
The Nodes per Processor topology information determines how many bits of the
APIC ID represent the Node (Zeppelin die, on Zen systems) ID. Documented in
Ryzen and Epyc Processor Programming Reference (PPR).
Correct topology information enables the scheduler to make better decisions
on this hardware.
Reviewed by: kib@
Tested by: jeff@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11801
during drain operations. When an sbuf is configured to use this feature by way
of the SBUF_DRAINTOEOR sbuf_new() flag, top-level sections started with
sbuf_start_section() create a record boundary marker that is used to avoid
flushing partial records.
Reviewed by: cem,imp,wblock
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D8536
Fallout from r322588. I'm not sure why !SMP is a knob we have, but, we have
it.
Reported by: Michael Butler <imb AT protected-networks.net>
Sponsored by: Dell EMC Isilon
