This device was originally used as part of the goldfish virtual hardware
platform used for emulating Android on QEMU, but is now also used as the
RTC for the RISC-V virt machine in QEMU. It provides a simple 64-bit
nanosecond timer exposed via a pair of memory-mapped 32-bit registers,
although only with 1s granularity.
Reviewed by: brooks (mentor), jhb (mentor), kp
Approved by: brooks (mentor), jhb (mentor), kp
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25717
from Intel DMAR support, so it can be used on other IOMMU systems.
Reviewed by: kib
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D25743
As Emanuel poited me the Linux processes these clock assignments in forward
order, not in reversed. I misread the original code.
Tha problem with wrong order for assigned clocks found in tegra (and some imx)
DT should be reanalyzed and solved by different way.
MFC with: r363123
Reported by; manu
This is a generic function start a scan request for the given
cam_sim.
Other driver can now just use this function to request a new rescan.
Submitted by: kibab
Handle the fact that parts of usb(4) can be compiled into the boot
loader, where M_WAITOK does not guarantee a successful allocation.
PR: 240545
Submitted by: Andrew Reiter <arr@watson.org> (original version)
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25706
I2C communication is done by a combination of driving a line low or
letting it float, so that it is either pulled up or driven low by
another party.
r355276 besides the stated goal of the change -- using the new GPIO API
-- also changed the logic, so that active state is signaled by actively
driving a line.
That worked with iicbb prior to r362042, but stopped working after that
commit on at least some hardware. My guess that the breakage was
related to getting an ACK bit. A device expected to be able to drive
SDA actively low, but controller was actively driving it high for some
time.
Anyway, this change seems to fix the problem.
Tested using gpioiic on Orange Pi PC Plus with HTU21 sensor.
Reported by: Nick Kostirya <nikolay.kostirya@i11.co>
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25684
This new function allows us to find the SMMU instance assigned
for a particular PCI RID.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D25687
If the hypervisor advertises support for the DISCARD command then the
guest can perform TRIM commands, freeing space on the backing store.
If VIRTIO_BLK_F_DISCARD is enabled, advertise DISKFLAG_CANDELETE
Tested with FreeBSD guests on bhyve and KVM
Reviewed by: jhb
Tested by: freqlabs
MFC after: 1 month
Relnotes: yes
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D21708
pmc_cpuid was uninitialized for most AMD processor families. We can still
populate this string for unimplemented families.
Also added a CPUID_TO_STEPPING macro and converted existing code to use it.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25673
It follows the equivalent Linux change to be able to differentiate
skylakex and cascadelakex, sharing the same model but not stepping.
This fixes skylakex handling broken by r363144.
MFC after: 6 days
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
to coalesce tx work requests.
Note that Coverity will still treat this as an out-of-bounds access. We
do want to compare 16B starting from ethmacdst but cmp_l2hdr was was
going beyond that by 2B.
cmp_l2hdr was introduced in r362905.
Reported by: Coverity (CID 1430284)
Sponsored by: Chelsio Communications
Linux processes these clocks in reverse order and some DT relies
on this fact. For example, the frequency setting for a given PLL
is the last in the list, preceded by the frequency setting of its
following divider or so...
MFC after: 1 week
Every revision of twsi after the A20 have a bug where we need to
write again the control register after each interrupts. We also need
to add some delay before writing to this register, a simple read of the
same register does the job so do that.
Also fix the case when we have finish sending all the bytes, it only worked
for 1 byte transfer (the same kind that we do for talking to the PMIC on A20
boards).
While here add more debug messages and rework some of them.
This was tested by talking to a AT23C32 eeprom and a DS3231 RTC from an
H3 and A20 board.
PR: 247576
Reported by: Manuel Stühn (freebsd@justmail.de)
MFC after: 1 week
On some boards there is a lot of of syscon node that are unused as
more specific drivers is probed before, no need to flood the console
for the mostly-unused generic ones.
MFC after: 1 week
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
Currently the linking order of the infiniband, IB, modules decide in which
order the clients are attached and detached. For example one IB client may
use resources from another IB client. This can lead to a potential deadlock
at shutdown. For example if the ipoib is unregistered after the ib_multicast
client is detached, then if ipoib is using multicast addresses a deadlock may
happen, because ib_multicast will wait for all its resources to be freed before
returning from the remove method.
Fix this by using module_xxx_order() instead of module_xxx().
Differential Revision: https://reviews.freebsd.org/D23973
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Ask the firmware for the number of frames that can be stuffed in one
work request.
- Modify mp_ring to increase the likelihood of tx coalescing when there
are just one or two threads that are doing most of the tx. Add teeth
to the abdication mechanism by pushing the consumer lock into mp_ring.
This reduces the likelihood that a consumer will get stuck with all
the work even though it is above its budget.
- Add support for coalesced tx WR to the VF driver. This, with the
changes above, results in a 7x improvement in the tx pps of the VF
driver for some common cases. The firmware vets the L2 headers
submitted by the VF driver and it's a big win if the checks are
performed for a batch of packets and not each one individually.
Reviewed by: jhb@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25454
Use fence instead of barrier, which is optimized to take advantage of
the x86 TSO memory model.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
This is a flag from the MAC that says the received packet didn't match
a keycache slot. This isn't technically a problem as WEP keys don't
match keycache slots (they're "global" keys), but it could be useful
for tracking down CCMP decryption failures.
Right now it's a no-op - it mirrors what the AR9300 HAL does and it
just increments a counter. But, hey, maybe one day I'll use it for
diagnosing keycache/CCMP decrypt issues.
The only thing this tunable enables now is reporting to ACPI _OSC that
Active State Power Management and Clock Power Management Capability are
"supported" by the OS.
I've found that at least some Supermicro server boards do not allow OS
to support native PCIe hot-plug unless it reports those capabilities.
After spending significant time in PCIe specs I have found very little
motivation for that, and none of it applies to those motherboards, not
enabling ASPM themselves. So unless OS explicitly wants to save power,
I see nothing for it to do there actually.
I guess it may get sense to support ASPM when we get Thunderbolt support.
Otherwise I have no system with PCIe hot-plug where power saving matters.
It would be nice to enable this by default, but I worry that it affect
power saving of some laptops, even though I haven't noticed that myself.
Not all interrupt sources that affect CIS bit were acknowledged.
Specifically, bits in STATESTS (aka WAKESTS) were left set.
The fix is to disable WAKEEN and clear STATESTS bits before the HDA
interrupt is enabled. This way we should never get any STATESTS bits.
I also added placeholders for all event bits that we currently do not
enable, do not handle and do not clear. This might get useful when / if
we enable any of them.
Reported by: kib (Apollo Lake hardware)
Tested by: kib (earlier, different change)
MFC after: 2 weeks
X-MFC with: r362294
- Move temporary sglists into the session structure and protect them
with a per-session lock instead of a per-adapter lock.
- Retire an unused session field, and move a debugging field under
INVARIANTS to avoid using the session lock for completion handling
when INVARIANTS isn't enabled.
- Use counter_u64 for per-adapter statistics.
Note that this helps for cases where multiple sessions are used
(e.g. multiple IPsec SAs or multiple KTLS connections). It does not
help for workloads that use a single session (e.g. a single GELI
volume).
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25457
