Extracted from the projects/uefi branch, this change is a reasonable
cleanup and will reduce the diffs to review when bringing in the
UEFI work.
Reviewed by: kib@
Sponsored by: The FreeBSD Foundation
The page presence memory test takes a long time on large memory systems
and has little value on contemporary amd64 hardware.
Sponsored by: The FreeBSD Foundation
ibm,dma-window properties. This is especially a concern when
#ibm,dma-address-cells is not specified and we have to use the regular
#address-cells property.
MFC after: 1 week
context switch just to call the done callback... On my machine, this
improves geli/gzero decrypt performance by ~27% from 550MB/sec to
~700MB/sec...
MFC after: 3 days
compiler interprets this as an undefined behaviour. Instead, ensure
that the sum of uio_offset and uio_resid is below OFF_MAX using the
operation which cannot overflow.
Reported and tested by: pho
Discussed with: bde
Approved by: des (pseudofs maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
enables data cache and other chip-specific features. It was previously
done via an early SYSINIT, but it was being done after pmap and vm setup,
and those setups need to use mutexes. On some modern ARM platforms,
the ldrex/strex instructions that implement mutexes require the data cache
to be enabled.
A nice side effect of enabling caching earlier is that it eliminates the
multi-second pause that used to happen early in boot while physical memory
and pmap and vm were being set up. On boards with 1 GB or more of ram
this pause was very noticible, sometimes 5-6 seconds.
PR: arm/183740
big chunk of kernel memory. Validate size of data. Add error handling to
avoid calling copyout() when data has not been read correctly.
Reviewed by: zbb
Reported by: x90c <geinblues@gmail.com>
MFC after: 2 days
larger than the operational region. If the op region size is zero,
clipping would create a zero-sized map entry. The result is that vm
map splay starts behaving inconsistently, sometimes returning
zero-sized entry, sometimes the next (or previous) entry.
One step further, it could result in e.g. vm_map_wire() setting
MAP_ENTRY_IN_TRANSITION on the zero-sized entry, but failing to clear
it in the done part. The vm_map_delete() than hangs forever waiting
for the flag removal.
Verify for zero-length requests and act as if it is always successfull
without performing any action on the address space.
Diagnosed by: pho
Tested by: pho (previous version)
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
is chunked to pieces limited by integer io_hold_cnt tunable, while
vm_fault_quick_hold_pages() takes integer max_count as the upper bound.
Rearrange the checks to correctly handle overflowing address arithmetic.
Submitted by: bde
Tested by: pho
Discussed with: alc
MFC after: 1 week
When entering a mapping via pmap_enter() unmanaged pages ought to be
naturally excluded from the "modified" and "referenced" emulation.
RW permission should be granted implicitly when requested,
otherwise unmanaged page will not recover from the permission fault
since there will be no PV entry to indicate that the page can be written.
In addition, only managed pages that participate in "modified"
emulation need to be marked as "dirty" and "writeable" when entered
with RW permissions. Likewise with "referenced" flag for managed pages.
Unmanaged ones however should not be marked as such.
Reviewed by: cognet, gber
When emulating modified bit the executable attribute was cleared by
mistake when calling pmap_set_prot(). This was not a problem before
changes to ref/mod emulation since all the pages were created RW basing
on the "prot" argument in pmap_enter(). Now however not all pages are RW
and the RW permission can be cleared in the process.
Added proper KTRs accordingly.
Spotted by: cognet
Reviewed by: gber
Now it is easy to expand the size of the mirror when all its components
are replaced. Also add g_resize method to geom_mirror class. It will write
updated metadata to new last sector, when parent provider is resized.
Silence from: geom@
MFC after: 1 month
host.host_ocr, examine the correct field when setting up the hardware. Also,
the offset for the capabilties register should be 0x140, not 0x240.
Submitted by: Ilya Bakulin <ilya@bakulin.de>
Pointy hat to: me
This is a fix for a regression introduced in r246293.
vm_page_clear_dirty expects the range to have DEV_BSIZE aligned boundaries,
otherwise it extends them. Thus it can happen that the whole page is
marked clean while actually having some small dirty region(s).
This commit makes the range properly aligned and ensures that only
the clean data is marked as such.
It would interesting to evaluate how much benefit clearing with DEV_BSIZE
granularity produces. Perhaps instead we should clear the whole page
when it is completely overwritten and don't bother clearing any bits
if only a portion a page is written.
Reported by: George Hartzell <hartzell@alerce.com>,
Richard Todd <rmtodd@servalan.servalan.com>
Tested by: George Hartzell <hartzell@alerce.com>,
Reviewed by: kib
MFC after: 5 days
On machines with seveal CPUs and enough RAM this can easily twice improve
ZFS performance or twice reduce CPU usage. It was disabled three years
ago due to memory and KVA exhaustion reports, but our VM subsystem got
improved a lot since that time, hopefully enough to make another try.
This is a last resort for very low memory condition in case other measures
to free memory were ineffective. Sequentially cycle through all CPUs and
extract per-CPU cache buckets into zone cache from where they can be freed.
Lock congestion is the same, whether it happens on alloc or free, so
handle it equally. Now that we have back pressure, there is no problem
to grow buckets a bit faster. Any way growth is much slower then in 9.x.
These new buckets make bucket size self-tuning more soft and precise.
Without them there are buckets for 1, 5, 13, 29, ... items. While at
bigger sizes difference about 2x is fine, at smallest ones it is 5x and
2.6x respectively. New buckets make that line look like 1, 3, 5, 9, 13,
29, reducing jumps between steps, making algorithm work softer, allocating
and freeing memory in better fitting chunks. Otherwise there is quite a
big gap between allocating 128K and 5x128K of RAM at once.
Every time system detects low memory condition decrease bucket sizes for
each zone by one item. As result, higher memory pressure will push to
smaller bucket sizes and so smaller per-CPU caches and so more efficient
memory use.
Before this change there was no force to oppose buckets growth as result
of practically inevitable zone lock conflicts, and after some run time
per-CPU caches could consume enough RAM to kill the system.
adapters. Both devices support Gigabit Ethernet and USB 2.0, and the AX88179
supports USB 3.0. The driver was written by kevlo@ and lwhsu@, with a few
bug fixes from me.
MFC after: 2 months
Fix several problems that can cause panics on kldload and kldunload.
* kproc_create(fasttrap_pid_cleanup_cb, ...) gets called before
fasttrap_provs.fth_table gets allocated. This can lead to a panic
on module load, because fasttrap_pid_cleanup_cb references
fasttrap_provs.fth_table. Move kproc_create down after the point
that fasttrap_provs.fth_table gets allocated, and modify the error
handling accordingly.
* dtrace_fasttrap_{fork,exec,exit} weren't getting NULLed until
after fasttrap_provs.fth_table got freed. That caused panics on
module unload because fasttrap_exec_exit calls
fasttrap_provider_retire, which references
fasttrap_provs.fth_table. NULL those function pointers earlier.
* There wasn't any code to destroy the
fasttrap_{tpoints,provs,procs}.fth_table mutexes on module unload,
leading to a resource leak when WITNESS is enabled. Destroy those
mutexes during fasttrap_unload().
Reviewed by: markj
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 4 weeks
It was not being correctly copied into the kernel on FreeBSD, and as a
result, probes with multiple probe sites were not being created properly.
To fix this, change the ioctl definition so that the fasttrap ioctl handler
is responsible for copying in userland data.
Submitted by: Prashanth Kumar <pra_udupi@yahoo.co.in>
MFC after: 1 month
Per POSIX, si_status should contain the value passed to exit() for
si_code==CLD_EXITED and the signal number for other si_code. This was
incorrect for CLD_EXITED and CLD_DUMPED.
This is still not fully POSIX-compliant (Austin group issue #594 says that
the full value passed to exit() shall be returned via si_status, not just
the low 8 bits) but is sufficient for a si_status-related test in libnih
(upstart, Debian/kFreeBSD).
PR: kern/184002
Reported by: Dmitrijs Ledkovs
Tested by: Dmitrijs Ledkovs
On some machines (G5 with lots of RAM), entering OF sometimes causes the
machine to hang. Once the machine is booted, currently the only entry point
into OF is through resetting the framebuffer on mode switch on these machines.
Disabling this allows the machine to stay up at the expense of less usable
consoles after X is started.
MFC after: Never, this is only a hack
some comment I wrote about these values "lying" in the negative diff, which
referes to an earlier misunderstanding about which node to read them from.
This gets at least the PPC64 kernel booting in the mac99 system model in
QEMU after bypassing the MacIO ATA driver, which apparently still has
problems.
conditionally include (but ignore failures) /boot/loader.rc.local and
/boot/menu.rc.local -- to make customizing the menu easier.
Reviewed by: alfred
Discussed on: -hackers
