Commit graph

4989 commits

Author SHA1 Message Date
Roger Hardiman
def1ddf3a8 Fix typo in comments 2000-10-31 14:30:29 +00:00
Roger Hardiman
51c5172097 Upgrade to driver 2.18
Support for new Hauppauge Model 44xxx WinTV Cards
(the ones with no audio mux)

Submitted by:	Christian Gusenbauer <Christian.Gusenbauer@netway.at>
2000-10-31 13:09:56 +00:00
Takanori Watanabe
840f9b5317 If acpica driver is loaded using kldload(8), warn and just ignore. 2000-10-31 11:54:10 +00:00
Poul-Henning Kamp
9005f14a3b Remove unused #includes.
Approved by:	nyan
2000-10-31 08:22:26 +00:00
Yoshihiro Takahashi
168d542ea5 Disabled EGA/VGA 1bpp/4bpp modes support. This is not real fix, but this comes
back to support 8bpp mode.
2000-10-31 07:58:34 +00:00
Matt Jacob
aa0898c0e0 I'm dropping the MAINTAINER request and see what happens. If it becomes
too hard for me to keep in sync with other platforms, FreeBSD will go
it's own way.
2000-10-31 05:55:54 +00:00
Mark Murray
f7261d9c5f Convert the de driver into a loadable module. Still missing is an
unload method. Lots of old cruft is removed.

Thanks to WPaul for large clue-injection and debugging services.

Reviewed by:	wpaul
2000-10-31 01:25:10 +00:00
Bill Paul
e99285a4f7 Call dc_apply_fixup() in dc_setcfg() for the MII case. 2000-10-31 00:06:39 +00:00
Bill Paul
5d801891d3 Grrr. The 'reg' variable in dc_apply_fixup() needs to be a u_int32_t, not
a u_int8_t. Pass the conical hat. This should fix certain cardbus 21143
cards that require SROM h0h0magic in order to enable their transceivers.
2000-10-30 23:51:39 +00:00
Søren Schmidt
afaa0eb776 Try a bit harder to test for ATA/ATAPI HW to probe, this is to avoid
some of the false comrades some devices fakes...
2000-10-30 20:45:24 +00:00
Poul-Henning Kamp
8879e52387 Add back some #include <sys/systm.h> which were needed when <sys/ktr.h>
doesn't mess us up.

Noted by:	Harti Brandt <brandt@fokus.gmd.de>
2000-10-30 20:37:01 +00:00
Søren Schmidt
92be7ac569 Update the Promise RAID code, there are differences between BIOS
version unfortunately...
2000-10-30 17:11:40 +00:00
Nick Hibma
d69d452a55 remove an unused function (and a warning) 2000-10-30 10:58:02 +00:00
Søren Schmidt
0dbc12d8ca Fix the PCCARD ATA breakage..
This is due to a bug that has been in there since Warneer did the
PCCARD stuff, the altioaddr is not offset 8 its offset 14 from
the base address.
Also only probe the master device, no known PCCARD ATA thingies
has a slave AFAIK..
2000-10-30 09:36:40 +00:00
Poul-Henning Kamp
da936bf80a Remove unneeded <stddef.h> #includes. 2000-10-29 16:57:42 +00:00
David Malone
66efa50621 Make a few more mallocs use M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	imp
2000-10-29 16:29:05 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
David Malone
5417ec4db1 Add the use of M_ZERO to some malloc calls.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	gibbs
2000-10-29 15:47:16 +00:00
Poul-Henning Kamp
9f69a4578a Weaken a bogus dependency on <sys/proc.h> in <sys/buf.h> by #ifdef'ing
the offending inline function (BUF_KERNPROC) on it being #included
already.

I'm not sure BUF_KERNPROC() is even the right thing to do or in the
right place or implemented the right way (inline vs normal function).

Remove consequently unneeded #includes of <sys/proc.h>
2000-10-29 14:54:55 +00:00
Poul-Henning Kamp
53ce36d17a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
Darren Reed
72371ff249 fix warning compile error about unused variable 2000-10-29 10:07:43 +00:00
Poul-Henning Kamp
db4035961b Fix params passed to pci_porten() and pci_memen(). 2000-10-29 09:59:28 +00:00
Noriaki Mitsunaga
82fdce0977 Change flags of ncv and nsp driver. Both were conflicted with the flags
used in lower layer (scsi_low.c).

The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100.
The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
2000-10-29 06:54:32 +00:00
Noriaki Mitsunaga
8e47dfb8e0 Remove unnecessary printf(). 2000-10-29 06:03:47 +00:00
Mike Smith
f53e8493fb Unconditionally turning on the I/O and memory enable bits in the PCI
command register is too aggressive.  Revert to the previous behaviour, but
leave the new behaviour available as an undocumented option.  It's not
clear what the Right, Right Thing is to do here, but the more conservative
approach is safer.
2000-10-28 23:07:13 +00:00
Cameron Grant
5bc2a29c8c add commented-out dependancies on the new sb8 and sb16 drivers 2000-10-28 19:35:54 +00:00
Cameron Grant
eadd0f839e split up sb16 and sb/sbpro drivers
we do not support sb versions <2.00, and the sb8 driver has not been tested
yet.

these drivers are not yet enabled by default.
2000-10-28 19:20:03 +00:00
Yoshihiro Takahashi
de103326a4 Removed extra calculation for X position (PC-98 only).
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-10-28 10:59:21 +00:00
Mike Smith
e10f2ee576 Return -10 from the PCI probe to allow room for an updated driver to
override one built into the kernel.
2000-10-28 10:46:30 +00:00
Peter Wemm
41fced74eb Fix typo s/DE_DEVICEID_FE2500/DC_DEVICEID_FE2500/ 2000-10-28 10:03:54 +00:00
Bill Paul
1d5e53109c Add PCI IDs for some additional cardbus cards. Yes, there really is
a RealTek 8139 cardbus device. Unfortunately it doesn't quite work yet
because the CIS parser barfs on it.

Submitted by msmith, with some small tweaks by me.
2000-10-28 09:00:20 +00:00
Mike Smith
011d43cdb3 Allow PCI busses to be connected to host bridges detected by ACPI as well. 2000-10-28 07:04:07 +00:00
Mike Smith
15e32d5d03 Initial FreeBSD OSPM (operating system power management) modules for
ACPICA.  Most of these are still works in progress.  Support exists for:

 - Fixed feature and control method power, lid and sleep buttons.
 - Detection of ISA PnP devices using ACPI namespace.
 - Detection of PCI root busses using ACPI namespace.
 - CPU throttling and sleep states (incomplete)
 - Thermal monitoring and cooling control (incomplete)
 - Interface to platform embedded controllers (mostly complete)
 - ACPI timer (incomplete)
 - Simple userland control of sleep states.
 - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
Mike Smith
fd660059d9 FreeBSD-specific OSD (operating system dependant) modules for the Intel
ACPICA code.
2000-10-28 06:56:15 +00:00
Mike Smith
6dc6d3bb7c Fix typo in the 4.x case. 2000-10-27 23:40:45 +00:00
Cameron Grant
d16b567379 implement SNDCTL_DSP_POST 2000-10-27 22:20:45 +00:00
Poul-Henning Kamp
bb2e7ebb7c Remove 86 unneeded #includes 2000-10-27 21:32:10 +00:00
Poul-Henning Kamp
46aa3347cb Convert all users of fldoff() to offsetof(). fldoff() is bad
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.

Define __offsetof() in <machine/ansi.h>

Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>

Remove myriad of local offsetof() definitions.

Remove includes of <stddef.h> in kernel code.

NB: Kernelcode should *never* include from /usr/include !

Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.

Deprecate <struct.h> with a warning.  The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.

Paritials reviews by:   various.
Significant brucifications by:  bde
2000-10-27 11:45:49 +00:00
Mark Murray
5f3431b5ad As the blocking model has seems to be troublesome for many, disable
it for now with an option.

This option is already deprecated, and will be removed when the
entropy-harvesting code is fast enough to warrant it.
2000-10-27 06:06:04 +00:00
Mike Smith
cb16d62f47 Add PCI device ID for an upcoming revision of the product. 2000-10-27 05:58:45 +00:00
Mike Smith
d1702591ac Add a missing newline to a diagnostic. 2000-10-27 05:58:16 +00:00
Bill Paul
0a46b1dccc Yet another bug fix/optimization for the Davicom DM9100/9102: increase
the PCI latency timer value to 0x80. Davicom's Linux driver does this,
and it drastically reduces the number of TX underruns in my tests. (Note:
this is done only for the Davicom chips. I'm not sure it's a good idea to
do it for all of them.)

Again, still waiting on confirmation before merging to stable.
2000-10-27 00:15:04 +00:00
Cameron Grant
9ec437a334 add reinit functions to mixers
unstaticize chn_start()
add reset/resetdone functions to channels
2000-10-26 20:46:58 +00:00
Cameron Grant
badd7dc127 do not attach to soundblaster 1.x - they are unsupported 2000-10-26 20:31:16 +00:00
Roger Hardiman
870b024f5d Add new ioctls for userland access to the MSP device 2000-10-26 16:41:48 +00:00
Roger Hardiman
9dc7a78df5 Fix typo 2000-10-26 16:27:51 +00:00
Cameron Grant
c0960a5e91 handle AFMT_QUERY right 2000-10-26 01:34:54 +00:00
Bill Paul
318a72d7b0 Set the DC_TX_INTR_ALWAYS and DC_TX_STORENFWD flags for the Davicom
DM9100/DM9102 chips. Do not set DC_TX_ONE. The DC_TX_USE_TX_INTR flag
causes dc_encap() to set the 'interrupt on TX completion' bit only
once every 64 packets. This is an attempt to reduce the number
of interrupts generated by the chip. You're supposed to get a 'no more
TX buffers left' interrupt once you hit the last packet whether you
ask for one or not, however it seems the Davicom chip doesn't generate
this interrupt, or at least it doesn't generate it under the same
circumstances. The result is that if you transmit n packets, where
n is less than 64, and then wait 5 seconds, you'll get a watchdog
timeout whether you want one or not. The DC_TX_INTR_ALWAYS causes
dc_encap() to request an interrupt for every frame.

I'm still waiting on confirmation from a couple of users to see if this
fixes their problems with the Davicom DM9102 before I merge this into
-stable, but this fixed the problem for me in my own testing so I'm
willing to make the change to -current right away.
2000-10-25 23:46:31 +00:00
Bill Paul
ee27ba8eae Add a missing SK_UNLOCK() to sk_attach_xmac(). 2000-10-25 23:36:45 +00:00
John Baldwin
083cc8729c This driver doesn't have a software interrupt handler, so don't attempt to
schedule a non-existant handler to run.
2000-10-25 21:29:36 +00:00