Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.
When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.
This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.
Submitted by: cognet@ (Olivier Houchard)
Nvme drives can be attached in a number of different ways. Separate out the PCI
attachment so that we can have other attachment types, like ahci and various
types of NVMeoF.
Submitted by: cognet@
If device is unplugged from the system (CSTS register reads return
0xffffffff), it makes no sense to send any more recovery requests or
expect any responses back. If there is a detach call in such state,
just stop all activity and free resources. If there is no detach
call (hot-plug is not supported), rely on normal timeout handling,
but when it trigger controller reset, do not wait for impossible and
quickly report failure.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This fixes possible double call of fail_fn, for example on hot removal.
It also allows ctrlr_fn to safely return NULL cookie in case of failure
and not get useless ns_fn or fail_fn call with NULL cookie later.
MFC after: 2 weeks
Otherwise the mutex needs to be dropped when copying out the midistat
sbuf, leading to a race which allows one to read kernel memory beyond
the end of the sbuf buffer.
Reported and tested by: pho
Security: CVE-2019-5612
order to have struct mii_data available. However, it only really needs
a forward declaration of struct mii_data for use in pointer form for
the return type of a function prototype.
Custom kernel configuration that have usb and fdt enabled, but no miibus,
end up with compilation failures because miibus_if.h will not get
generated.
Due to the above, the following changes have been made to usb_ethernet.h:
* remove the inclusion of mii headers
* forward-declare struct mii_data
* include net/ifq.h to satify the need for complete struct ifqueue
Reviewed by: ian
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D21293
Return an empty string when the location is unknown instead of the
string "unknown". This ensures that all location entries are of
the form key=val.
Suggested by: imp
Approved by: jhb (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21326
Move fast entropy source registration to the earlier
SI_SUB_RANDOM:SI_ORDER_FOURTH and move random_harvestq_prime after that.
Relocate the registration routines out of the much later randomdev module
and into random_harvestq.
This is necessary for the fast random sources to actually register before we
perform random_harvestq_prime() early in the kernel boot.
No functional change.
Reviewed by: delphij, markjm
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D21308
If simple multifuction device also provides syscon interface, its
childern should be able to consume it. Due to this:
- declare coresponding method in syscon interface
- implement it in simple multifunction device driver
MFC after: 1 week
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
It is unused, the ABI was broken in r322969, and it is broken by design
(more than MDNPAD md devices can exist and there is no way to retreive
them with this interface).
mdconfig(8) was converted to use libgeom to obtain this information
in r157160 and any other consumers of MDIOCLIST should likewise be
converted.
Reviewed by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18936
This adds safety net for the case of misconfigured NTB with too big
memory window, for which we may be unable to allocate a memory buffer,
which does not make much sense for the network interface. While there,
fix the code to really work with asymmetric window sizes setup.
This makes driver just print warning message on boot instead of hanging
if too large memory window is configured.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This restores parity with AMD NTB driver. Though without any drivers
supporting more then one peer and respective KPI modification to pass
peer index to most of the calls this addition is pretty useless now.
MFC after: 2 weeks
No functional change.
Add a verbose comment giving an example side-by-side comparison between the
prior and Concurrent modes of Fortuna, and why one should believe they
produce the same result.
The intent is to flip this on by default prior to 13.0, so testing is
encouraged. To enable, add the following to loader.conf:
kern.random.fortuna.concurrent_read="1"
The intent is also to flip the default blockcipher to the faster Chacha-20
prior to 13.0, so testing of that mode of operation is also appreciated.
To enable, add the following to loader.conf:
kern.random.use_chacha20_cipher="1"
Approved by: secteam(implicit)
Namespace Optimal I/O Boundary field added in NVMe 1.3 and Namespace
Preferred Write Granularity added in 1.4 allow upper layers to align
I/Os for improved SSD performance and endurance.
I don't have hardware reportig those yet, but NPWG could probably be
reported by bhyve.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
With support for multiple namespaces and multiple ports in NVMe there is
now a need for reliable unique namespace identification alike to SCSI.
MFC after: 1 weeks
Sponsored by: iXsystems, Inc.
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
Some hardware needs more than 32, bump this value.
We cannot use the _alloc for of getencprop as this function is called
too early in the boot before pmap is initialized and we only have
2k of stack when cninit is called.
Discussed with: ian
- Check for an invalid device (vendor is invalid) before reading the
header type register when examining function 0 of a possible device.
- When iterating over functions of a device, reject any device whose
16-bit vendor is invalid rather than requiring the full 32-bit
vendor+device to be all 1's. In practice the latter check is
probably fine, but checking the vendor is what the PCI spec
recommends.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21147
RT2860_WCID_MAX is supposed to describe the max STA index for wcid2ni, and
was instead being used as the size -- off-by-one.
rt2860_drain_stats_fifo was range-checking wcid only after accessing
out-of-bounds potentially.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (basically)
Obtained from: Haiku (58d16d9fe2d5a209cf22823359a8407d138e1a87)
Differential Revision: 3 days
NVMe reservations are quite alike to SCSI persistent reservations and
can be used in clustered setups with shared multiport storage.
MFC after: 10 days
Relnotes: yes
Sponsored by: iXsystems, Inc.
Instances of the device can be configured using hints or FDT data.
Interfaces to reconfigure the chip and extract voltage measurements from
it are available via sysctl(8).
PowerPC, and possibly other architectures, use different address ranges for
PCI space vs physical address space, which is only mapped at resource
activation time, when the BAR gets written. The DRM kernel modules do not
activate the rman resources, soas not to waste KVA, instead only mapping
parts of the PCI memory at a time. This introduces a
BUS_TRANSLATE_RESOURCE() method, implemented in the Open Firmware/FDT PCI
driver, to perform this necessary translation without activating the
resource.
In addition to system KPI changes, LinuxKPI is updated to handle a
big-endian host, by adding proper endian swaps to the I/O functions.
Submitted by: mmacy
Reported by: hselasky
Differential Revision: https://reviews.freebsd.org/D21096
