As of 9e6544dd6e contigfree(9) is no longer
needed and should not be used anymore. We leave a wrapper for 3rd party
code in at least 15.x but remove (almost) all other cases from the tree.
This leaves one use of contigfree(9) untouched; that was the original
trigger for 9e6544dd6e and is handled in D45813 (to be committed
seperately later).
Sponsored by: The FreeBSD Foundation
Reviewed by: markj, kib
Tested by: pho (10h stress test run)
Differential Revision: https://reviews.freebsd.org/D46099
All architectures enable NEW_PCIB in DEFAULTS (arm being the most recent
to do so in 121be55599 (arm: Set NEW_PCIB in DEFAULTS rather than a
subset of kernel configs")), so it's time we removed the legacy code
that no longer sees much testing and has a significant maintenance
burden.
Reviewed by: jhb, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D32954
The allocation call could result in sleep lock violation if it is in
smp_rendezvous. Move it out. Also move the pcpu memory pointer to
vmbus_pcpu_data since it is only used on Hyper-V.
PR: 279738
Reported by: gbe
Fixes: 2b887687ed
MFC after: 2 weeks
Sponsored by: Microsoft
Add boot parameter hw.vmbus.tlb_hcall for tlb flush hypercall.
By default it is set to 1 to allow hyercall tlb flush. It can be
set to 0 in loader.conf to turn off hypercall and use system
provided tlb flush routine.
The change also changes flag in the per cpu contiguous memory
allocation to no wait to avoid panic happened some cases which there
are no enough contiguous memery available at boot time.
Reported by: gbe
Tested by: whu
MFC after: 1 week
Fixes: 2b887687ed
Sponsored by: Microsoft
Currently FreeBSD uses IPI based TLB flushing for remote
TLB flushing. Hyper-V allows hypercalls to flush local and
remote TLB. The use of Hyper-V hypercalls gives significant
performance improvement in TLB operations.
This patch set during test has shown near to 40 percent
TLB performance improvement.
Also this patch adds rep hypercall implementation as well.
Reviewed by: whu, kib
Tested by: whu
Authored-by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Co-Authored-by: Erni Sri Satya Vennela <ernis@microsoft.com>
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D45521
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
QEMU emulates Hyper-V [1] but lacks the emulation for vmbus_res, thus no
coherence information is available. Add NULL check for it and fallback
to no coherence. This will prevent FreeBSD guests from panic on QEMU
with the Hyper-V enlightenment hv-synic enabled.
For real Hyper-V, both gen1 and gen2 have vmbus_res then they are not
affected by this change.
1. https://www.qemu.org/docs/master/system/i386/hyperv.html
PR: 274810
Reviewed by: mhorne, emaste, delphij, whu
Diagnosed by: mhorne
Fixes: e7a9817b8d Hyper-V: vmbus: implementat bus_get_dma_tag in vmbus
Insta-MFC approved by: re (delphij) for 14.0-RC4
Differential Revision: https://reviews.freebsd.org/D42414
It is observed that netvsc's send rings could stall on the latest
Azure Boost platforms. This is due to vmbus_rxbr_read() routine
doesn't check if host is waiting for more room to put data, which
leads to host side sleeping forever on this vmbus channel. The
problem was only observed on the latest platform because the host
requests larger buffer ring room to be available, which causes
the issue to happen much more easily.
Fix this by adding check in the vmbus_rxbr_read call and signaling
the host in the callers if check returns positively.
Reported by: NetApp
Tested by: whu
MFC after: 3 days
Sponsored by: Microsoft
In ARM64 Hyper-V UFS filesystem is getting corruption and those
corruptions are consistently happening just after hitting a page
boundary. It is unable to correctly read disk blocks into buffers
that are not aligned to 512-byte boundaries.
It happens because storvsc needs physically contiguous memory which
may not be the case when bus_dma needs to create a bounce buffer.
This can happen when the destination is not cache-line aligned.
Hyper-V VMs have VMbus synthetic devices and PCI pass-thru devices
that are added dynamically via the VMbus protocol and are not
represented in the ACPI DSDT. Only the top level VMbus node exists
in the DSDT. As such, on ARM64 these devices don't pick up coherence
information and default to not hardware coherent.
PR: 267654, 272666
Reviewed by: andrew, whu
Tested by: lwhsu
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D41728
When running VM on ARM64 Hyper-V, we have seen netvsc/hn driver hit
assert on reading duplicated network completion packets over vmbus
channel or one of the tx channels stalls completely. This seems to
caused by processor reordering the instructions when vmbus driver
reading or updating its channel ring buffer indexes.
Fix this by using load acquire and store release instructions to
enforce the order of these memory accesses.
PR: 271764
Reported by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Tested by: whu
Sponsored by: Microsoft
Vmbus_synic_setup() is invoked via vmbus_intrhook -> vmbus_doattach
-> smp_rendezvous. On !EARLY_AP_STARTUP (e.g., aarch64), SMP isn't
functional in intrhooks and smp_rendezvous() will just call
vmbus_synic_setup() on the boot processor. There's nothing that will
initialize the pcpu data on every other AP.
To fix it we need to use SI_SUB_SMP for vmbus_doattach(). With this
patch the vmbus interrupt should work on all arm64 cpus on HyperV.
Reported by: kevans
Reviewed by: kevans, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Obtained from: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D40279
In the Hyper-V drivers we need to allocate buffers shared between the
host and guest. This memory has been allocated with bus_dma, however
it doesn't use this correctly, e.g. it is missing calls to
bus_dmamap_sync. Along with this on arm64 we need this memory to be
mapped with the correct memory type that bus_dma may not use.
Switch to contigmalloc to allocate this memory as this will correctly
allocate cacheable memory.
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40227
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
In non-Hyper-V systems during Hyper-V initialization, system
initialization was getting hung, as hyperv_identify(),
was returning successful irrespective of the type of the platform.
Reviewed by: andrew, whu
Fixes: 9729f076e4
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37219
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
Refactor the code to put split the MSR values for x86 and arm64
Hyper-V. Code not yet built. This is one of several patches for
the arm64 Hyper-V enablement.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37103
This is the second part of the ARM64 Hyper-V enablement.
These changes here are mostly with Make, release changes and also
changes required in vmbus.c hyperv.c and common files in hyperv.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36467
In ARM64 gen2 Hyper-V, use IRQ resource from vmbus_res, which is owning
the IRQ for current device tree. It allows the MMIO resource to be
successfully allocated for vmbus from parent acpi_syscontainer.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37064
The changes are to refactor the code of vmbus.c and hyperv.c to keep minimal
arch specific codes there and have them in separate files in x86/ arm64/ .
x86 is a new directory, which contains codes for x86 / x86_64. Instead of
repeating the same codes in existing amd64/ and i386/, this approach reduced
the repetition. This is first of three patches for Hyper-V enablement.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36466
The scanning code uses Giant to coordinate its accesses to newbus as
well as to synchronize a little state within hyperv's vmbus. Switch to
the new bus_topo_* functions instead of referring to Giant explicitly.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D31840
This reverts commit 9ef7df022a ("hyperv: Register hyperv_timecounter
later during boot") and adds a comment explaining why the timecounter
needs to be registered as early as it is.
PR: 259878
Fixes: 9ef7df022a ("hyperv: Register hyperv_timecounter later during boot")
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33014
Previously the MSR-based timecounter was registered during
SI_SUB_HYPERVISOR, i.e., very early during boot, and before SI_SUB_LOCK.
After commit 621fd9dcb2 this triggers a panic since the timecounter
list lock is not yet initialized.
The hyperv timecounter does not need to be registered so early, so defer
that to SI_SUB_DRIVERS, at the same time the hyperv TSC timecounter is
registered.
Reported by: whu
Approved by: whu
Fixes: 621fd9dcb2 ("timecounter: Lock the timecounter list")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Add vDSO support for timekeeping devices that support the KVM/XEN
paravirtual clock API.
Also, expose, in the userspace-accessible '<machine/pvclock.h>',
definitions that will be needed by 'libc' to support
'VDSO_TH_ALGO_X86_PVCLK'.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31418
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
The vmbus ISR needs to live in a trampoline. Dynamically allocating a
trampoline at driver initialization time poses some difficulties due to
the fact that the KENTER macro assumes that the offset relative to
tramp_idleptd is fixed at static link time. Another problem is that
native_lapic_ipi_alloc() uses setidt(), which assumes a fixed trampoline
offset.
Rather than fight this, move the Hyper-V ISR to i386/exception.s. Add a
new HYPERV kernel option to make this optional, and configure it by
default on i386. This is sufficient to make use of vmbus(4) after the
4/4 split. Note that vmbus cannot be loaded dynamically and both the
HYPERV option and device must be configured together. I think this is
not too onerous a requirement, since vmbus(4) was previously
non-functional.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: whu, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30577
Normally raw interrupt handler is provided by the kernel text. But
vmbus module registers its own handler that needs to be mapped into
userspace mapping on PTI kernels.
Reported and reviewed by: whu
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30310
Do not assume that VBE framebuffer metadata can be used. Like with the
EFI fb metadata, it may be null, so we should take care not to
dereference the null vbefb pointer. This avoids a panic when booting
-CURRENT on a gen1 VM in Azure.
Approved by: tsoome
Sponsored by: Miles AS
Differential Revision: https://reviews.freebsd.org/D27533
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
On Gen2 VMs, Hyper-V provides mmio space for framebuffer.
This mmio address range is not useable for other PCI devices.
Currently only efifb driver is using this range without reserving
it from system.
Therefore, vmbus driver reserves it before any other PCI device
drivers start to request mmio addresses.
PR: 222996
Submitted by: weh@microsoft.com
Reported by: dmitry_kuleshov@ukr.net
Reviewed by: decui@microsoft.com
Sponsored by: Microsoft
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
Add VMBus protocol version 4.0. and 5.0 to support Windows 10 and newer HyperV hosts.
For VMBus 4.0 and newer HyperV, the netvsc gpadl teardown must be done after vmbus close.
Submitted by: whu
MFC after: 2 weeks
Sponsored by: Microsoft
