Mainly link errors interrupts should only be activated on fully linked port,
otherwise noise on lanes can cause livelock. But we don't have error
counters yet, so leave these interrupts disabled.
(cherry picked from commit ce5a4083de)
- add method to read gate enable/disable staust from HW
- show gate status in sysctl clock dump
MFC after: 1 week
(cherry picked from commit 1a74d77f85)
Always recalculate the frequency, the cache is lazily initialized so it is not always up to date.
While I'm in mark sysctl as MPSAFE.
Discussed with: manu, adrian
MFC after: 1 week
(cherry picked from commit 72a2f3b5e2)
We should reserve two descriptors (not MMC_SECTORS) for potentially
unaligned (so bounced) buffer fragments, one for the starting fragment
and one for the ending fragment.
Submitted by: kjopek@gmail.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30387
(cherry picked from commit dfb7360222)
By definition ofw_bus_get_node() should consistently return -1 when there
is no associated OF node.
MFC after: 4 weeks
Discussed with: nwhitehorn
Analyzed in: https://reviews.freebsd.org/D30761
(cherry picked from commit 3eae4e106a)
This removes the pmap entry when switching away to e.g. drm fb.
Differential Revision: https://reviews.freebsd.org/D29020
MFC After: 1 month
(cherry picked from commit 8ebda6e44b)
It seems to be needed only to serialize very old K8 registers access.
Introduce separate lock for that and remove Giant dependency.
MFC after: 2 weeks
(cherry picked from commit 6c101ed7a3)
Minor reformatting nits to make mprsas_scsiio_timeout match
mpssas_scsiio_timeout more closely. The differences aren't necessary and
are distracting when comparing the routines. No functional changes.
Sponsored by: Netflix
(cherry picked from commit 2bbaed4d7f)
Port 9781c28c6d and a8837c77ef to the mps driver. Before this
change devq was frozen only if some command was sent to the target after
reset started, but release was called always. This change freezes the
devq immediately, leaving mprsas_action_scsiio() check only to cover
race condition due to different lock devq use.
This should also avoid unnecessary requeue of the commands, creating
additional log noise and confusing some broken apps. It also avoids a
'busy' requeue of I/Os failing when we're doing recovery that takes
longer than the normal busy timeout. These I/Os failing can lead to
filesystems being unmounted in the force unmount case for I/O errors.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33228
(cherry picked from commit a10253cffe)
Print cm instead of sc here, as is done in mpr. We can get the sc from
cm, but not vice versa.
Sponsored by: Netflix
(cherry picked from commit b086bc0bf1)
In the acpi_cpu_postattach SYSINIT function cpu_softc may be NULL, e.g.
on arm64 when booting from FDT. Check it is not NULL at the start of
the function so we don't try to dereference a NULL pointer.
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 4e50efb194)
While it still looks like previous code worked by coincidence, this
change broke things even more instead of fixing.
Reported by: avg@
MFC after: 1 week
(cherry picked from commit 94a72c5ac4)
Before this device unit number match was coincidental and broke if I
disabled some CPU device(s). Aside of cosmetics, for some drivers
(may be considered broken) it caused talking to wrong CPUs.
(cherry picked from commit d3a8f98acb)
There are already APIC ID, ACPI ID and OS ID for each CPU. In perfect
world all of those may match, but at least for SuperMicro server boards
none of them do. Plus none of them match the CPU devices listing order
by ACPI. Previous code used the ACPI device listing order to number
cpuX devices. It looked nice from NewBus perspective, but introduced
4th different set of IDs. Extremely confusing one, since in some places
the device unit numbers were treated as OS CPU IDs (coretemp), but not
in others (sysctl dev.cpu.X.%location).
(cherry picked from commit c8077ccd70)
With various firmware files used by graphics and wireless drivers
we are exceeding the current 32 character module name (file path
in kldxref) length.
In order to overcome this issue bump it to the maximum path length
for the next version.
To be able to MFC provide backward compat support for another version
of the struct as the offsets for the second half change due to the
array size increase.
MAXMODNAME being defined to MAXPATHLEN needs param.h to be
included first. With only 7 modules (or LinuxKPI module.h) not
doing that adjust them rather than including param.h in module.h [1].
Reported by: Greg V (greg unrelenting.technology)
Sponsored by: The FreeBSD Foundation
Suggested by: imp [1]
Reviewed by: imp (and others to different level)
Differential Revision: https://reviews.freebsd.org/D32383
(cherry picked from commit df38ada293)
Add support for the "snps,dis_rxdet_inp3_quirk" quirk needed
at least on SolidRun's HoneyComb.
Reviewed by: manu, mw
Differential Revision: https://reviews.freebsd.org/D32921
(cherry picked from commit 3987e50611)
This seems to be required even if the watchdog is accessed via the common
MMIO space.
Tested on:
- Ryzen 3 3200U APU;
- Ryzen 7 5800X CPU with X570 chipset.
(cherry picked from commit cca0d3bbd8)
Passing up such descriptors to iflib is obviously wasteful.
But the main conern is that we may overrun iri_frags array because of
them. That's been observed in practice.
Also, assert that the number of fragments / descriptors / segments is
less than IFLIB_MAX_RX_SEGS.
Sponsored by: Panzura LLC
(cherry picked from commit 9c612a5d0a)
1. Doorbell interrupt status may arrive lately when doorbell interrupt on
ARC-1886.
2. System boot up hung when ARC-1886 with no volume created or no device
attached.
Many thanks to Areca for continuing to support FreeBSD.
(cherry picked from commit 6964b77e59)
After 53f5ac1310 allowed SATA device mapping to enclosure slots,
it may have sense to provide enclosure device emulation even without
real hardware interface like SGPIO just for purposes of physical
device location tracking (still assuming straight cabling).
MFC after: 1 week
Sponsored by: iXsystems, Inc.
(cherry picked from commit 9aba757e92)
Make sure to reset 'message_done' flag when jumping from a message to the
next one within the same interrupt handler call. This happens only when
a write with no-stop flag message is followed by a write with no-start
flag message.
Without this fix the second message would be prematurely "completed"
without waiting for an ACK (or NACK) for its first byte and without
sending subsequent bytes (if any).
Fixes: ff1e8581 twsi: support more message combinations in transfers
(cherry picked from commit e5268c3d43)
The e1000 drivers (em, lem, igb) are currently looking at the
iflib copies of the capabilities bitvectors (scctx->isc_capabilities
and scctx->isc_capenable) rather than the ifnet ones
(ifp->if_capabilities and ifp->if_capenable). However, the latter
are the ones that are actually updated by ifconfig and that should
be used by the drivers during interface operation. The former are
set by the driver on interface attach (for iflib internal use)
and should not be used anymore by the driver.
This patch fixes the e1000 driver to use the correct bitvectors.
PR: 260068
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33154
(cherry picked from commit e0f4cdba53)
Currently the type isn't set in the fbtype struct so any userland
program that call the FBIOGTYPE ioctl will think it's a FBTYPE_SUN1BW
which is far from the truth.
No app that I found find checks the type but at least now it's correct.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33221
(cherry picked from commit ca23e9d2ac)
