The handshake timer can race with another thread sending a FIN or RST
to close a TOE TLS socket. Just bail from the timer without
rescheduling if the connection is closed when the timer fires.
Reported by: Sony Arpita Das @ Chelsio QA
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D27583
Xenstore watches received are queued in a list and processed in a
deferred thread. Such queuing was done without any checking, so a
guest could potentially trigger a resource starvation against the
FreeBSD kernel if such kernel is watching any user-controlled xenstore
path.
Allowing limiting the amount of pending events a watch can accumulate
to prevent a remote guest from triggering this resource starvation
issue.
For the PV device backends and frontends this limitation is only
applied to the other end /state node, which is limited to 1 pending
event, the rest of the watched paths can still have unlimited pending
watches because they are either local or controlled by a privileged
domain.
The xenstore user-space device gets special treatment as it's not
possible for the kernel to know whether the paths being watched by
user-space processes are controlled by a guest domain. For this reason
watches set by the xenstore user-space device are limited to 1000
pending events. Note this can be modified using the
max_pending_watch_events sysctl of the device.
This is XSA-349.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
The issue was found while building cxgbe with gcc 10 (in illumos),
the array subscription check is warning us about outside the bounds
access.
See also: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Each entry actually stores a native pointer, not a uint64_t quantity. While
we're here, go ahead and export the pointer as-is rather than converting it
to KVA. This may be more useful as consumers can map /dev/mem and observe
the entry.
For reference, see: sys/contrib/edk2/Include/Uefi/UefiSpec.h
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27669
Account for any residual bytes. This is only relevant for vnode-backed
md(4) devices.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27738
The divider table already contains the correct HW divider value, it should
not be modified by other flags such as 'CLK_DIV_ZERO_BASED'.
MFC after: 4 weeks
These drivers should have been removed along with tl(4) as part of
7c897ca91f and r347918 respectively
as these fromer made sure to only ever attach to the latter, e. g.:
<...>
static int
tlphy_probe(device_t dev)
{
if (!mii_dev_mac_match(dev, "tl"))
return (ENXIO);
<...>
If LED state is set through evdev interface, than asynchronous nature
of USB transfer callback can lead to change of order of events echoed
back to userland as it causes LED events to be echoed with some lag.
Fix that with echoing of LED events synchronously in ioctl handler.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27750
Unlike AT keyboards, HID devices are able to send all pc105 key
states within a single report. Let evdev to transmit all key state
changes within a single report too.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27749
Add support for LAN found on Thinkpad USB-C and Thunderbolt Gen 2
docking stations.
Submitted by: ali.abdallah@suse.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Hardware timestamp reporting is disabled by default as it produces many
extra events which are not handled by consumers like libinput.
Add hw.usb.wmt.timestamps=1 tunable to loader.conf to enable it.
Obtained from: sysutils/iichid
In Hybrid mode, the number of contacts that can be reported in one
report is less than the maximum number of contacts that the device
supports. For example, a device that supports a maximum of 4
concurrent physical contacts, can set up its top-level collection to
deliver a maximum of two contacts in one report. If four contact
points are present, the device can break these up into two serial
reports that deliver two contacts each.
Obtained from: sysutils/iichid
Original if_dwc driver used m_defrag as an implementation shortcut but on
1000Mb networks it affects performance. Implement multi-descriptor support for
TX path.
Tested on RK3399-Firefly, patch adds ~15% of network throughput.
Reviewed By: manu
Differential Revision: https://reviews.freebsd.org/D27520
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
g_handleattr_int() consumes the bio if the attribute matches, so when we
check bp->bio_cmd bp may have been freed.
Move GETATTR handling to a separate function to avoid the problem. We
do not need to set bio_completed for such bios, g_handleattr_int() will
handle it. Also remove the setting of bio_resid before the
devstat_end_transaction_bio() call. All of the md(4) bio handlers set
bio_resid already.
Reported by: KASAN
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27724
Otherwise libinput refuses to recoginize some Synaptics touchpads with
"kernel bug: device has min == max on ABS_X" message in Xorg.log.
PR: 251149
Reported-by: Jens Grassel <freebsd-ports@jan0sch.de>
Tested-by: Jens Grassel <freebsd-ports@jan0sch.de>
MFC-after: 2 weeks
Conducted tests showed that Embedded Controller is not mandatory for
WMI extensions to work.
Reported-by: yuripv
Reviewed-by: avg
MFC-after: 2 weeks
Differential-Revision: https://reviews.freebsd.org/D27653
These Mini-Box LCDs are using Microchip components and sub-licensed product
IDs. Whilst here, update the constant names and descriptions for the products
to use the names listed on the manufacturer's website rather than vague ones.
The picoLCD 4x20 is named that on the manufacturer's website so prefer that
name, even though linux-usb.org lists it with the numbers reversed as one might
expect.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D27670
The SRAT may contain multiple distinct entries that together describe a
contiguous region of physical memory. In this case we were not
coalescing the corresponding entries in the memory affinity table, which
led to fragmented phys_avail[] entries. Since r338431 the vm_phys_segs[]
entries derived from phys_avail[] will be coalesced, resulting in a
situation where vm_phys_segs[] entries do not have a covering
phys_avail[] entry. vm_page_startup() will not add such segments to the
physical memory allocator, leaving them unused.
Reported by: Don Morris <dgmorris@earthlink.net>
Reviewed by: kib, vangyzen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27620
This caused us to write to the low half of the feature word twice, once with
the high bits and once with the low bits. Common legacy device implementations
seem to be fairly lenient about being able to write to the feature bits
multiple times, but Arm's models use a stricter implementation that will ignore
the second write. This fixes using vtnet(4) on those models.
Reported by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Pointy hat: jrtc27
instead of bailing out with EBUSY if there are any.
If driver module is unloaded, or just device is forcibly detached from
the driver, there is no way for driver to correctly unload otherwise.
Esp. if there are resources dedicated to the VFs which prevent turning
down other resources.
Reviewed by: jhb
Sponsored by: Mellanox Technologies / NVidia Networking
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27615
Add capability to SPIBUS to have child device with IRQ.
For example many ADC chip have a dedicated pin to signal "data ready"
and the host can just wait for a interrupt to go out and read the result.
It is the same code as in R282674 and R282702 for IICBUS by Michal Meloun
Submitted by: Oskar Holmund <oskar.holmlund@ohdata.se>
Differential Revision: https://reviews.freebsd.org/D27396
Current way, hardcoded value plus heuristic is not conform to the PCI(e)
specification and it fails on systems where MSI-X bar is not initialized by
BIOS/ACPI (many arm or arm64 systems for example).
Instead, use the standard PCI(e) capability for determining of
MSIX table bar address.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27265
- Use a uintptr_t cast to get the virtual address of a pointer in
USB_P2U() instead of a ptrdiff_t.
- Add offsets to a char * pointer directly without roundtripping the
pointer through a ptrdiff_t in USB_ADD_BYTES().
Reviewed by: imp, hselasky
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27581
