This will make future extensions of the API much easier.
The intent is to remove support for DIOCADDRULE in FreeBSD 14.
Reviewed by: markj (previous version), glebius (previous version)
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29557
(cherry picked from commit 5c62eded5a)
Notable upstream pull request merges:
#11742 When specifying raidz vdev name, parity count should match
#11744 Use a helper function to clarify gang block size
#11771 Support running FreeBSD buildworld on Arm-based macOS hosts
This is the last update that will be MFCed into stable/13.
From now on, the tracking of OpenZFS branches will be different:
- main continues tracking openzfs/zfs/master
- stable/13 is going to track openzfs/zfs/zfs-2.1-release
Obtained from: OpenZFS
(cherry picked from commit 6db169e920)
Currently, AMD-vi PCI-e passthrough will lead to the following lines in
dmesg:
"kernel: CPU0: local APIC error 0x40
ivhd0: Error: completion failed tail:0x720, head:0x0."
After some tracing, the problem is due to the interaction with
amdvi_alloc_intr_resources() and pci_driver_added(). In ivrs_drv, the
identification of AMD-vi IVHD is done by walking over the ACPI IVRS
table and ivhdX device_ts are added under the acpi bus, while there are
no driver handling the corresponding IOMMU PCI function. In
amdvi_alloc_intr_resources(), the MSI intr are allocated with the ivhdX
device_t instead of the IOMMU PCI function device_t. bus_setup_intr() is
called on ivhdX. the IOMMU pci function device_t is only used for
pci_enable_msi(). Since bus_setup_intr() is not called on IOMMU pci
function, the IOMMU PCI function device_t's dinfo->cfg.msi is never
updated to reflect the supposed msi_data and msi_addr. So the msi_data
and msi_addr stay in the value 0. When pci_driver_added() tried to loop
over the children of a pci bus, and do pci_cfg_restore() on each of
them, msi_addr and msi_data with value 0 will be written to the MSI
capability of the IOMMU pci function, thus explaining the errors in
dmesg.
This change includes an amdiommu driver which currently does attaching,
detaching and providing DEVMETHODs for setting up and tearing down
interrupt. The purpose of the driver is to prevent pci_driver_added()
from calling pci_cfg_restore() on the IOMMU PCI function device_t.
The introduction of the amdiommu driver handles allocation of an IRQ
resource within the IOMMU PCI function, so that the dinfo->cfg.msi is
populated.
This has been tested on EPYC Rome 7282 with Radeon 5700XT GPU.
Sponsored by: The FreeBSD Foundation
Reviewed by: jhb
Approved by: philip (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28984
(cherry picked from commit 74ada297e8)
Notable upstream pull request merges:
#11652 Split dmu_zfetch() speculation and execution parts
#11682 Fix zfs_get_data access to files with wrong generation
#11735 Clean up RAIDZ/DRAID ereport code
#11737 Initialize metaslab range trees in metaslab_init
#11739 FreeBSD: make seqc asserts conditional on replay
#11763 Allow setting bootfs property on pools with indirect vdevs
#11767 FreeBSD: Fix memory leaks in kstats
Obtained from: OpenZFS
(cherry picked from commit f9693bef8d)
Notable upstream pull request merges:
#11153 Scalable teardown lock for FreeBSD
#11651 Don't bomb out when using keylocation=file://
#11667 zvol: call zil_replaying() during replay
#11683 abd_get_offset_struct() may allocate new abd
#11693 Intentionally allow ZFS_READONLY in zfs_write
#11716 zpool import cachefile improvements
#11720 FreeBSD: Clean up zfsdev_close to match Linux
#11730 FreeBSD: bring back possibility to rewind the
checkpoint from bootloader
Obtained from: OpenZFS
(cherry picked from commit 9db44a8e5d)
Implement basic support for allocating memory from a specific numa node
in the LinuxKPI.
Differential Revision: https://reviews.freebsd.org/D29077
Reviewed by: markj@ and kib@
Sponsored by: Mellanox Technologies // NVIDIA Networking
(cherry picked from commit ebe5cf355d)
After length decisions, we've decided that the if_wg(4) driver and
related work is not yet ready to live in the tree. This driver has
larger security implications than many, and thus will be held to
more scrutiny than other drivers.
Requested by: secteam
Approved by: re
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
(cherry picked from commit ba27dd8be8)
- bump version to 2.0.0-FreeBSD_gbf156c966
- install definition files for the new "-o compatibility" option
to "zpool create"
MFC after: 2 weeks
(cherry picked from commit 10f57cb98f)
This updates the driver to align with the version included in
the "Intel Ethernet Adapter Complete Driver Pack", version 25.6.
There are no major functional changes; this mostly contains
bug fixes and changes to prepare for new features. This version
of the driver uses the previously committed ice_ddp package
1.3.19.0.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28640
(cherry picked from commit d08b8680e1)
This package is intended to be used with ice(4) version 0.28.1-k.
That update will happen in a forthcoming commit.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
(cherry picked from commit a7ac518bff)
This node is part of an A10-NSP (L2-BSA) development.
Carrier networks tend to stack three or more tags for internal
purposes and therefore hiding the service tags deep inside of the
stack. When decomposing such an access network frame, the processing
order is typically reversed: First distinguish by service, than by
other means.
This new netgragh node allows to bring the relevant VLAN in front (to
the out-most position). This way other netgraph nodes (like ng_vlan)
can operate on this specific type.
Reviewed by: manpages (gbe), brueffer (manpages), kp
Relnotes: yes
Sponsored by: IKS Service GmbH
Differential Revision: https://reviews.freebsd.org/D22076
(cherry picked from commit cfd6422a52)
With the switch to OpenZFS 2.0 the platform-dependent resource
usage accounting code got missing.
Patch author: Ryan Moeller <freqlabs@FreeBSD.org>
Obtained from: openzfs/zfs@64e0fe14ff
MFS after: 3 days
(direct commit)
AFAICT, this was an oversight from
9e5787d228 (svn r364746). That revision
inadvertently disabled assertions unconditionally.
Reviewed by: freqlabs
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D28256
(cherry picked from commit 174a7e578a)
Update zfs_config.h to match latest merge in FreeBSD
The version string is declared as 2.0.0-FreeBSD_gf11b09dec to provide
more information about the loaded module:
- the OpenZFS version in base is 2.0
- we are using the in tree-module ("FreeBSD")
- the last merged OpenZFS git revision ("gf11b09dec")
With future merges the git revision tag should be updated.
As we are merging from OpenZFS master branch and already include features
like dRAID, referencing patchlevel releases (2.0.1, 2.0.2) is pointless.
Reviewed by: freqlabs
Differential Revision: https://reviews.freebsd.org/D28447
(cherry picked from commit 8fb966790e)
This code implements a version of the devres framework found
working for various iwlwifi use cases and also providing functions
for ttm_page_alloc_dma.c from DRM.
Part of the framework replicates the consumed KPI, while others
are internal helper functions.
In addition the simple devm_k*malloc() consumers were implemented
and kvasprintf() was enhanced to also work for the devm_kasprintf()
case.
Addmittingly lkpi_devm_kmalloc_release() could be avoided but for
the overall understanding of the code and possible memory tracing
it may still be helpful.
Further devsres consumer are implemented for iwlwifi but will follow
later as the main reason for this change is to sort out overlap with
DRM.
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi
MFC After: 3 days
Reviewed-by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D28189
(cherry picked from commit fa765ca73e)
Implement linux firmware KPI compat code.
This includes: request_firmware() request_firmware_nowait(),
request_firmware_direct(), firmware_request_nowarn(),
and release_firmware().
Given we will try to map requested names from natively ported
or full-linuxkpi-using drivers to a firmware(9) auto-loading
name format (.ko file name and image name matching),
we quieten firmware(9) and print success or failure (unless
the _nowarn() version was called) in the linuxkpi implementation.
At the moment we try up-to 4 different naming combinations,
with path stripped, original name, and requested name with '/'
or '.' replaced.
We do not currently defer loading in the "nowait" case.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
(firmware(9) nowarn update from D27413)
MFC after: 3 days
Reviewed by: kib, manu (looked at older versions)
Differential Revision: https://reviews.freebsd.org/D27414
(cherry picked from commit a6c2507d1b)
(cherry picked from commit 4a26380ba6)
Since we use --input-type binary these options are rather meaningless. Both
binutils and elftoolchain ignore the option in this case, but LLVM does not,
and instead strips all symbols from the output file, causing missing symbols at
run time if building with llvm-objcopy. Thus simply remove the options; the
linux module has never included them for building its VDSO (added in r283407),
but for some reason the original commit of linux64 (r283424) added them.
These should however eventually be changed to use template assembly files as is
now done for firmware and MFS_IMAGE.
Reviewed by: emaste, trasz
Differential Revision: https://reviews.freebsd.org/D27740
Currently only amd64, i386 and powerpc build VirtIO modules, yet all other
architectures have at least one kernel configuration that includes the
transport drivers, and so they lack drivers for all the devices they don't
statically compile into the kernel. Instead, enable the build everywhere so all
architectures have the full set of device drivers available.
Reviewed by: bryanv (earlier version), imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D28058
Many I2C "compatibility" mouse devices found on touchpads continue to
return last report data in sampling mode after touch has been ended.
That results in cursor drift. Filter out such a reports with comparing
content of current report with content of previous one.
Reported by: many
Tested by: omatsuda, gllb (github.com)
Obtained from: sysutils/iichid
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
This driver supports some arm and arm64 boards equipped with
"snps,dw-wdt"-compatible watchdog device.
Tested on RK3399-based board (RockPro64).
Once started watchdog device cannot be stopped.
Interrupt handler has mode to kick watchdog even when software does not do it
properly.
This can be controlled via sysctl: dev.dwwdt.prevent_restart.
Also - driver handles system shutdown and prevents from restart when system
is asked to reboot.
Submitted by: kjopek@gmail.com
Differential Revision: https://reviews.freebsd.org/D26761
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
This module intended to measure performance of routing lookups.
Uses a list of IP addresses specified by sysctl one-by-one.
Performance testing is triggered by changing sysctl OID with a number of lookups to execute.
Lookups are done by the chunks of 10K routes, entering/exiting epoch on
chunk granularity to amortise cost.
Example:
make -C sys/modules/test/fib_lookup unload load
for i in `cat ~/ip4.txt`; do sysctl net.route.test.add_inet_addr=$i; done
for i in `cat ~/ip6.txt`; do sysctl net.route.test.add_inet6_addr=$i; done
sysctl net.route.test.run_inet=10000000
dmesg | tail
Dec 13 23:24:05 current kernel: 10000000 packets in 417240173 nanoseconds, 23967011 pps
Dec 13 23:24:06 current kernel: run: 10000000 packets vnet 0xfffff80003073f00
Dec 13 23:24:07 current kernel: 10000000 packets in 423086254 nanoseconds, 23635842 pps
Differential Revision: https://reviews.freebsd.org/D27604
This change introduces loadable fib lookup modules based on
DPDK rte_lpm lib targeted for high-speed lookups in large-scale tables.
It is based on the lookup framework described in D27401.
IPv4 module is called dpdk_lpm4. It wraps around rte_lpm [1] library.
This library implements variation of DIR24-8 [2] lookup algorithm.
Module provide lockless route lookups and in-place incremental updates,
allowing for good RIB performance.
IPv6 module is called dpdk_lpm6. It wraps around rte_lpm6 [3] library.
Implementation can be seen as multi-bit trie where the stride or number of bits
inspected on each level varies from level to level.
It can vary from 1 to 14 memory accesses, with 5 being the average value
for the lengths that are most commonly used in IPv6.
Module provide lockless route lookups for global unicast addresses
and in-place incremental updates, allowing for good RIB performance.
Implementation details:
* wrapper code lives in `sys/contrib/dpdk_rte_lpm/dpdk_lpm[6].c`.
* rte_lpm[6] implementation contains both RIB and FIB code.
. RIB ("rule_") code, backed by array of hash tables part has been commented out,
as base radix already provides all the necessary primitives.
* link-local lookups are currently implemented as base radix lookup.
This part should be converted to something like read-only radix trie.
Usage detail:
Compile kernel with option FIB_ALGO and load dpdk_lpm4/dpdk_lpm6
module at any time. They will be picked up automatically when
amount of routes raises to several thousand.
[1]: https://doc.dpdk.org/guides/prog_guide/lpm_lib.html
[2]: http://yuba.stanford.edu/~nickm/papers/Infocom98_lookup.pdf
[3]: https://doc.dpdk.org/guides/prog_guide/lpm6_lib.html
Differential Revision: https://reviews.freebsd.org/D27412
A test of this is funcs/tst.strtok.d which has this filter:
BEGIN
/(this->field = strtok(this->str, ",")) == NULL/
{
exit(1);
}
The test will randomly fail with exit status of 1 indicating that this->field
was NULL even though printing it out shows it is not.
This is compiled to the DTrace instruction set:
// Pushed arguments not shown here
// call strtok() and set result into %r1
07: 2f001f01 call DIF_SUBR(31), %r1 ! strtok
// set thread local scalar this->field from %r1
08: 39050101 stls %r1, DT_VAR(1281) ! DT_VAR(1281) = "field"
// Prepare for the == comparison
// Set right side of %r2 to NULL
09: 25000102 setx DT_INTEGER[1], %r2 ! 0x0
// string compare %r1 (strtok result) to %r2
10: 27010200 scmp %r1, %r2
In this case only %r1 is loaded with a string limit set to lim1. %r2 being
NULL does not get loaded and does not set lim2. Then we call dtrace_strncmp()
with MIN(lim1, lim2) resulting in passing 0 and comparing neither side.
dtrace_strncmp() handles this case fine and it already has been while
being lucky with what lim2 was [un]initialized as.
Reviewed by: markj, Don Morris <dgmorris AT earthlink.net>
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27671
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
