Added ht20 mode, based on if_run from FreeBSD, and if_mtw.c
from OpenBSD.
PR: 247545
Approved by: adrian, wireless
Differential Revision: https://reviews.freebsd.org/D45179
ELECOM EDC-QUA3C is a USB3.1 Gen1 Type-A/C 2.5GBASE-T network adapter.
This also works as a cdce(4) device by:
usbconfig -d X.Y set_config 1
or
usbconfig -d X.Y set_config 2
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/1578
Use the correct ID, as I have one of these NICs.
Add the previous one back in case it's out there in the wild.
@emaste did a bit of a dig into the product numbers.
@sam did change the ID from 0x0828 -> 082a in a commit
a long while back. It's worth reading the code review for
further details.
However, I do have one of these NICs and I verified that
it indeed has the given ID, and with some follow-up work
to fix some race conditions, it works fine in 2GHz 11bg
and 5GHz 11a operation.
Differential Revision: https://reviews.freebsd.org/D47654
Obtained from: Linux, drivers/net/wireless/ath/ar5523/ar5523.c
Key code swapping between [<>] and [^°] key is enabled for all Apple ISO
type keyboards. Before, swapping was enabled when the Eject key was
detected in HID usage. This did not correlate well with the swapped
keys presence.
usbdevs file is extended by several Apple keyboard models to support ISO
model identification.
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/1506
The RTW8821CU_CD entry in quirks has an invalid lo_rev/hi_rev match
entry. Use the different USB_QUIRK macro to match on all of these;
the value we currently see is 0x0200 on two different wifi sticks. [1]
Also add an entry for the DLINK DWA-181 rev A1, rtw88 USB.
Submitted by: phk
Tested by: phk
Fixes: b3b6a959c8 [1]
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D46189
In some cases, the USB_QUIRK_VP macro was being misused. Instead of
setting quirks to the intended value, the first two supplied quirks
would go into lo_rev and hi_rev. Replace it with USB_QUIRK_VO which only
takes the needed args. This also makes the Dummy products, which where
being used to correctly set vendor only quirks, not necessary.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1153
Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/
Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791
The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437
Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.
MFC-After: 1 week
Sponsored by: Metify Inc.
Sponsored by: Klara Inc.
- remove Huawei 3G E3131 (E3131_INIT):
- frees up 0x1505/0x14fe shared IDs => product is EOL (since...)
- 3G networks are shutdown/scheduled
- E3131 devices will still work the same via scsi_huawei_eject2
- new 4G devices will switch & report correctly now
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
The Windows Dev Kit 2023 has an if_ure NIC with custom vendor and
procuct IDs. Add them to the driver.
Tested by: Robert Clausecker <fuz@fuz.su>
Obtained from: OpenBSD
Sponsored by: Arm Ltd
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
Add DLink DWA-182 rev D1 and generic Realtek RTW8821CU entry found on
a Tenda U10 USB WLAN Stick, AC 650 Mbps (and possibly more devices).
The latter first presents itself as a CD device with Windows drivers
(useless on FreeBSD) first so add a quirk for that we get the wireless
device right away.
MFC after: 2 weeks
While here sort some other Realtek entries by DeviceID.
Set UQ_MSC_NO_INQUIRY and UQ_MSC_NO_GETMAXLUN quirks for mass storage,
which is the initial mode of this dongle.
The modem is shipped with at least two firmware versions: 10.X and 11.X,
without ability to update to the newer one.
The 11.X version works more or less fine, but the 10.X one resets after
receiving either an SCSI INQUIRY, or a get_max_lun command.
Since both of those are used for automatic quirk detection, this leads
to a reset cycle making the device somewhat unusable.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: hps, wma
Differential Revision: https://reviews.freebsd.org/D35076
According to information found on the internet the following products
use exactly the same hardware but probably different USB IDs:
- Edimax EW-7811Un V2 (v2)
- Edimax EW-7811GLN 2.0A (v2)
I am not adding them as I cannot verify.
PR: 254280
MFC after: 1 week
