If a connection is NAT-ed we could previously only terminate it by its
ID or the post-NAT IP address. Allow users to specify they want look for
the state by its pre-NAT address. Usage: `pfctl -k nat -k <address>`.
See also: https://redmine.pfsense.org/issues/11556
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42312
The nvlist-based version will be removed in FreeBSD 16.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42279
The dead_bpf_if is not subjected to be written. Make it const so that
on destructive writing to it the kernel will panic instead of silent
memory corruption.
No functional change intended.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D42189
When userspace includes pfvar.h it doesn't get the kernel's COMPAT_*
defines, so we end up not having required symbols in userspace. This
caused the libpfctl port to fail to build.
libpfctl will be updated to use the new netlink-based state export code
soon, which will also fix thix build issue.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The ddb commands for lltable do not produce useful l3_addr information.
This fixes the llentry pretty printer to correctly display the l3_addr
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42253
An interface's bpf could feasibly not exist, in which case
bpf_peers_present() would panic from a NULL pointer dereference. Solve
this by adding a new IfAPI that could deal with a NULL bpf, if such
could occur in the network stack.
Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D42082
An interface's bpf could feasibly not exist, in which case
bpf_peers_present() would panic from a NULL pointer dereference. Solve
this by adding a new IfAPI that includes a NULL check. Since this API
is used in only a handful of locations, it reduces the the NULL check
scope over inserting the check into bpf_peers_present().
Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
Implement equivalents to DIOCSTART and DIOCSTOP in netlink. Provide a
libpfctl implementation and add a basic test case, mostly to verify that
we still return the same errors as before the conversion
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42145
Move the NETLINK define into opt_global.h so we can rely on it being
set correctly, without having to remember to include opt_netlink.h.
This ensures that the NETLINK define is correctly set. If not we
may end up with unloadable modules, due to missing symbols (such as
nlmsg_get_group_writer).
PR: 274306
Reviewed by: imp, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D42179
We now have an improved version (via netlink). The old-style ioctl will
be removed in FreeBSD 16.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42101
The sysctl variable `net.route.netisr_maxqlen` is actually a loader
tunable. Add sysctl flag CTLFLAG_TUN to it so that `sysctl -T` will
report it correctly.
No functional change intended.
Reviewed by: glebius
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D41928
Complete phase three of 3da1cf1e88.
With commit 110113bc08, vnet sysctl variables can be loader tunable
but the feature is limited. When the kernel modules have been initialized,
any changes (e.g. via kenv) to kernel environment variable will not affect
subsequently created VNETs.
This change relexes the limitation by listening on kernel environment
variable's set / unset events, and then update the 'master' copy of vnet
SYSCTL or restore it to its initial value.
With this change, TUNABLE_XXX_FETCH can be greately eliminated for vnet
loader tunables.
Reviewed by: glebius
Fixes: 110113bc08 sysctl(9): Enable vnet sysctl variables to be loader tunable
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D41825
Parse IP removal in ASCONF chunks, find the affected state(s) and mark
them as shutting down. This will cause them to time out according to
PFTM_TCP_CLOSING timeouts, rather than waiting for the established
session timeout.
MFC after: 3 weeks
Sponsored by: Orange Business Services
Only create new states for INIT chunks, or when we're creating a
secondary state for a multihomed association.
Store and verify verification tag.
MFC after: 3 weeks
Sponsored by: Orange Business Services
SCTP may announce additional IP addresses it'll use in the INIT/INIT_ACK
chunks, or in ASCONF chunks at any time during the connection. Parse these
parameters, evaluate the ruleset for the new connection and if allowed
create the corresponding states.
MFC after: 3 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D41637
Commit 868aabb470 introduced per-flow priority. There's a defect in the
logic for untagged traffic, it does not check M_VLANTAG set in the mbuf
packet header or MTAG_8021Q/MTAG_8021Q_PCP_OUT tag set by firewall, then
can result missing desired priority in the outbound packets.
For mbuf packet with M_VLANTAG in header, some interfaces happen to work
due to bug in the drivers mentioned in D39499. As modern interfaces have
VLAN hardware offloading, the defect is barely noticeable unless the
feature per-flow priority is widely tested.
As a side effect of this defect, the soft padding to work around buggy
bridges is bypassed. That may result in regression if soft padding is
requested.
PR: 273431
Discussed with: kib
Fixes: 868aabb470 Add IP(V6)_VLAN_PCP to set 802.1 priority per-flow
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39536
There is no reason for this fallback to be conditional on COMPAT_FREEBSD12.
PR: 273539
MFC after: 1 week
Sponsored by: Klara, Inc.
Sponsored by: NetApp, Inc.
Reviewed by: melifaro, allanjude
Differential Revision: https://reviews.freebsd.org/D41717
These calls have nvlist variants that completely supersede them.
Remove the old code.
Reviewed by: mjg
MFC after: never
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D41651
For oubound traffic, the flag M_VLANTAG is set in mbuf packet header to
indicate the underlaying interface do hardware VLAN tag insertion if
capable, otherwise the net stack will do 802.1Q encapsulation instead.
Commit 868aabb470 introduced per-flow priority which set the priority ID
in the mbuf packet header. There's a corner case that when the driver is
disabled to do hardware VLAN tag insertion, and the net stack do 802.1Q
encapsulation, then it will result double tagged packets if the driver do
not check the enabled capability (hardware VLAN tag insertion).
Unfortunately some drivers, currently known cxgbe(4) re(4) ure(4) igc(4)
and vmx(4), have this issue. From a quick review for other interface
drivers I believe a lot more drivers have the same issue. It makes more
sense to fix in net stack than to try to change every single driver.
PR: 270736
Reviewed by: kp
Fixes: 868aabb470 Add IP(V6)_VLAN_PCP to set 802.1 priority per-flow
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39499
These now have nvlist based alternatives, so remove them.
Reviewed by: mjg, Pau Amma <pauamma@gundo.com> (man page)
MFC after: never
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30056
Summary:
These came in the original DrvAPI commits in 2014, and are obsoleted by
bpf_mtap_if() and ether_bpf_mtap_if(). The `_if` suffix, rather than
prefix, conveys that it's operating on the bpf of the interface, instead
than the interface itself.
Reviewed by: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D41146
In rS360398, a new iflib device method was added to opt out of VLAN
events needing an interface reset.
I am switching the default to not requiring a restart for:
* VLAN events
* unknown events
After fixing various bugs, I do not think this would be a common need
of hardware and it is undesirable from the user's perspective causing
link flaps and much slower VLAN configuration. Currently, there are no
other restart events besides VLAN events, and setting the
ifdi_needs_restart default to false will alleviate the need to churn
every driver if an odd event is added in the future for specific
hardware.
markj points out this could cause churn in the other direction; I will
solve that problem with an event registration system as he mentions in
the review should we need it in the future.
These drivers will opt into restart and need further inspection or work:
* ixv (needs code audit, 61a8231 fixed principal issue; re-init probably
not necessary)
* axgbe (needs code audit; re-init probably not necessary)
* iavf - (needs code audit; interaction with Malicious Driver Detection
mentioned in rS360398)
* mgb - no VLAN functions are currently implemented. Left a comment.
MFC after: 2 weeks
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41558
pf_route() sends traffic to a specified next hop over a specific
interface. The next hop is obtained in pf_map_addr() but the interface
is obtained directly via r->rpool.cur->kif` outside of the lock held in
pf_map_addr() in multiple places around pf. The chosen interface is not
stored in source node.
Move the interface selection into pf_map_addr(), have the function
return it together with the chosen IP address and ensure its stored
in struct pf_ksrc_node, store it in the source node and use the stored
value when needed.
Sponsored by: InnoGames GmbH
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D41570
In commit c7cffd65c5 the function ether_8021q_frame() was slightly
refactored to use pointer of struct ether_8021q_tag as parameter qtag to
include the new option proto.
It is wrong to write to qtag->pcp as it will effectively change the memory
that qtag points to. Unfortunately the transmit routine of if_vlan parses
pointer of the member ifv_qtag of its softc which stores vlan interface's
PCP internally, when transmitting mbufs that contains PCP the vlan
interface's PCP will get overwritten.
Fix by operating on a local copy of qtag->pcp. Also mark 'struct ether_8021q_tag'
as const so that compilers can pick up such kind of bug.
PR: 273304
Reviewed by: kp
Fixes: c7cffd65c5 Add support for stacked VLANs (IEEE 802.1ad, AKA Q-in-Q)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39505
When we receive a packet and remove the encapsulating layer we should
also clear out protocol flags and any mbuf tags.
If we do not we risk confusing firewalls filtering the tunneled packet.
See also: https://redmine.pfsense.org/issues/14682#change-69073
Sponsored by: Rubicon Communications, LLC ("Netgate")
vlan_capabilities(), used by the IFCAP ioctl, was not respecting the
IFCAP_LRO bit if it was masked by the requestor.
This prevented if_bridge(4) from automasking LRO with a message like:
bridge0: can't disable some capabilities on em3.11: 0x400
This also prevented manually disabling LRO from any vlan interface.
PR: 254596
Reported by: Paul Vixie <paul@redbarn.org>
MFC after: 1 week
This reverts commit 5f11a33cee.
As requested by Kevin Bowling. He explains:
> The subtle bug was that vlan_capabilities() in if_vlan was not obeying
> the requested mask from its IFCAP ioctl.
If the parent interface is not a bridge and can do LRO and
checksum offloading on VLANs, then guess it may do LRO on VLANs.
False positive here cost nothing, while false negative may lead
to some confusions. According to Wikipedia:
"LRO should not operate on machines acting as routers, as it breaks
the end-to-end principle and can significantly impact performance."
The same reasoning applies to machines acting as bridges.
PR: 254596
MFC after: 3 weeks
In iflib_init_locked(), sctx and scctx both point to the same value,
which is the ifc_softc_ctx field in the iflib softc. Remove the
declaration and assignment to sctx since scctx can be used instead, and
the name of scctx follows the naming convention used for local variables
that point to ifc_softc_ctx.
In theory there should be no functional impact with this change.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D41325
This helps align some of the code with the rest of the style used in
iflib, but as marius@ points out, this is not style(9).
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D41324
This code was used by the first incarnation of wg(4) and is dead ever
since f187d6dfbf has removed the latter
again. Moreover, this code matched iflib(4) like a square peg fits in
a round hole, was incomplete and despite some hacks still tailored to
VPC and wg(4) but not generic. In effect, this reverts the following:
09f6ff4f1a (w/ its "ancillary changes")
9aeca213241f93e931d90f9544d03e0dd691b412
Reviewed by: erj, kbowling
Differential Revision: <https://reviews.freebsd.org/D41196>
During a driver reload stress test, after 50-300 reloads a panic occurs.
After adding sleeps in between loading and unloading the driver, the
issue does not occur. It's possible that loading/unloading too fast may
cause the gt_taskqueue pointer to be freed earlier than expected;
checking for a null pointer first fixes it.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: erj@
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D39457
With the current implementation of if_bridge(4), bridge_enqueue()
calls gif_transmit() only. Ensure it stays that way so that the
expectations in both drivers are either met or changed accordingly.
PR: 227450
The code added in c89c8a1029 in order
to compensate possible misalignment caused by prepending the IP4/6
header with an EtherIP one got broken at some point by a rewrite of
gif(4). For better or worse, 8018ac153f
relaxed the alignment of struct ip from 32 bit to 16 bit, though. As
a result, a 16 bit offset of the IPv4 header induced by the addition
of the 16 bit EtherIP one no longer is a problem in the first place.
The alignment of struct ip6_hdr currently is even only 8 bit, making
it even less problematic with regards to possible misalignment.
Thus, remove the code for handling misalignment in in{,6}_gif_output()
altogether again.
While at it, replace the 3 bcopy(9) calls in gif(4) with memcpy(9) as
there's no need to handle overlap here.
Send an SCTP Abort message if we're refusing a connection, just like we
send a RST for TCP.
MFC after: 3 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D40864
Basic state tracking for SCTP. This means we scan through the packet to
identify the different chunks (so we can identify state changes).
MFC after: 3 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D40862
Panic occurs during loading driver using kldload. It exists since netlink is
enabled. There is problem with double locking ctx. This fix allows to call
ether_ifattach() without locked ctx.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
PR: 271768
Reviewed by: erj@, jhb@
MFC after: 1 day
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D40557
Actions applied to a processed packet come in case of stateless
firewalling from a rule or in case of statefull firewalling from a
state. The state obtains the actions from a rule when it is created by a
rule or by pfsync. The logic for deciding if actions come from a rule or
a state is spread across many places in pf.
There already is struct pf_rule_actions in struct pf_pdesc and thus it
can be used as a central place for storing actions and their parameters.
OpenBSD does something similar: they also store the actions in struct
pf_pdesc and have no variables in pf_test() but they use separate
variables instead of a structure. By using struct pf_rule_actions we can
simplify the code even further. Applying of actions is done *only* in
pf_rule_to_actions() no matter if for the legacy scrub rules or for the
normal match / pass rules. The logic of choosing if rule or state
actions are used is applied only once in pf_test() by copying the whole
struct.
Reviewed by: kp
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D41009
The variable storing the direction of a processed packet is passed
around to many functions. Most of those functions already have a pointer
to struct pf_pdesc which also contains the direction. By using the one
in struct pf_pdesc we can reduce the amount of arguments passed around.
Reviewed by: kp
Sponsored by: InnGames GmbH
Differential Revision: https://reviews.freebsd.org/D41008
