When O_CREAT is specified, the third, variadic argument is
required as the permission. If on is not passed, then depending
on the ABI, either the contents of the third argument register
or some arbitrary stuff on the stack will be used as the permission.
This has been merged to NetBSD.
Reviewed by: asomers, ngie
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20972
Historically we have not distinguished between kernel wirings and user
wirings for accounting purposes. User wirings (via mlock(2)) were
subject to a global limit on the number of wired pages, so if large
swaths of physical memory were wired by the kernel, as happens with
the ZFS ARC among other things, the limit could be exceeded, causing
user wirings to fail.
The change adds a new counter, v_user_wire_count, which counts the
number of virtual pages wired by user processes via mlock(2) and
mlockall(2). Only user-wired pages are subject to the system-wide
limit which helps provide some safety against deadlocks. In
particular, while sources of kernel wirings typically support some
backpressure mechanism, there is no way to reclaim user-wired pages
shorting of killing the wiring process. The limit is exported as
vm.max_user_wired, renamed from vm.max_wired, and changed from u_int
to u_long.
The choice to count virtual user-wired pages rather than physical
pages was done for simplicity. There are mechanisms that can cause
user-wired mappings to be destroyed while maintaining a wiring of
the backing physical page; these make it difficult to accurately
track user wirings at the physical page layer.
The change also closes some holes which allowed user wirings to succeed
even when they would cause the system limit to be exceeded. For
instance, mmap() may now fail with ENOMEM in a process that has called
mlockall(MCL_FUTURE) if the new mapping would cause the user wiring
limit to be exceeded.
Note that bhyve -S is subject to the user wiring limit, which defaults
to 1/3 of physical RAM. Users that wish to exceed the limit must tune
vm.max_user_wired.
Reviewed by: kib, ngie (mlock() test changes)
Tested by: pho (earlier version)
MFC after: 45 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19908
sbt is the time in the future that the tsleep_sbt() is expected to be completed
at. sbtt is the current time. Depending on the precision with sysctl
kern.timecounter.alloweddeviation the start time may be incremented by
tc_tick_sbt. The same increment is needed for the current time of sbtt before
calculating the difference. The impact of missing this increment is that rmtp
may increase by one tc_tick_sbt on every early [EINTR] return. If the same
struct is passed in for rqtp as rmtp this can result in rqtp effectively
incrementing by tc_tick_sbt and sleeping longer than originally intended.
This problem was introduced in r247797.
Reviewed by: kib, markj, vangyzen (all on an older version of the test)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14362
sparc64 and riscv do not support 10 arguments, but MIPS now does.
While here, combine clauses for architectures that support the same
number of arguments to reduce duplication.
Sponsored by: DARPA / AFRL
The man page is years out of date regarding errors. Our implementation _does_
allow unaligned addresses, and it _does_not_ check for negative lengths,
because the length is unsigned. It checks for overflow instead.
Update the tests accordingly.
Reviewed by: bcr
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13826
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
The kern.coredump sysctl can be set to 0 to disable coredumps. Skip the
'status_coredump' and 'wait6_coredumped' tests if this sysctl is set to 0
rather than reporting a failure.
Submitted by: brooks
Reviewed by: ngie
Obtained from: CheriBSD
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10665
Restore the stock (upstream) code under an #else block, so it's easier
for me to visualize and understand the code that needs to be upstreamed.
MFC after: 2 months
X-MFC with: r316178, r316179, r316180
Sponsored by: Dell EMC Isilon
msgsnd(2)'s msgsz argument does not describe the full structure, only the
message component.
Reported by: Coverity
CIDs: 1368703, 1368711
Sponsored by: Dell EMC Isilon
msgsnd's msgsz argument is the size of the message following the 'long'
message type. Don't include the message type in the size of the message
when invoking msgsnd(2).
Reported by: Coverity
CID: 1368712
Sponsored by: Dell EMC Isilon
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
This also (inadvertently) contains an update to
contrib/netbsd-tests/lib/libc/sys/t_wait.c (new testcases).
MFC after: 2 weeks
In collaboration with: christos@NetBSD.org
There's no sense in trying to close a file descriptor from the negative cases
with unlink_test; it's best to ignore these cases.
The mkfifo case does make sense to keep though.
MFC after: 3 days
This code is unused on FreeBSD, but it mutes a valid Coverity warning
which would be true on NetBSD
MFC after: 3 days
Reported by: Coverity
CID: 978311
Ensure child exits when complete as it's always run in a forked
process.
Add a missing break statement in :pselect_sigmask when calling
child(..) for clarity and to avoid weird domino effects if the
child process somehow does something it's not supposed to do
with the logfiles, file descriptors, etc
MFC after: 1 week
Reported by: Coverity
CID: 1223369, 1223370, 1300301
executing :mincore_resid
The default process limits in FreeBSD is 64kB for unprivileged users,
which empirically is too low to run the :mincore_resid testcase.
Process limits are inherited, so even though the default limit for
root users is RLIM_INFINITY, the inherited limit with "sudo" with the
default login.conf will be 64kB.
Use setrlimit to set rlim_max for RLIMIT_MEMLOCK to RLIM_INFINITY to
avoid ENOMEM issues when calling mlock to wire the mmap'ed address
space.
setrlimit requires root access to increase rlim_max, so require root
privileges when running the test
Discovered when executing the tests with sudo, e.g.
"sudo kyua test -k /usr/tests/lib/libc/sys/Kyuafile mincore_test"
MFC after: 2 weeks
This uses the same fix as r294894 did for the mlock test. The code from
that commit is moved into a common object file which PROGS supports
building first.
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8689
