- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
The check was not introduced in r342628, but the subsequent unchecked access to
refs was added then, prompting a Coverity warning about "Null pointer
dereferences (FORWARD_NULL)." The warning is bogus due to M_WAITOK, but so is
the NULL check that hints it, so just remove it.
CID: 1398588
Reported by: Coverity
the destroying cdev.
Currently linux_destroy_dev() waits for the reference count on the
linux cdev to drain, and each open file hold the reference.
Practically it means that linux_destroy_dev() is blocked until all
userspace processes that have the cdev open, exit. FreeBSD devfs does
not have such problem, because device refcount only prevents freeing
of the cdev memory, and separate 'active methods' counter blocks
destroy_dev() until all threads leave the cdevsw methods. After that,
attempts to enter cdevsw methods are refused with an error.
Implement somewhat similar mechanism for LinuxKPI cdevs. Demote cdev
refcount to only mean a hold on the linux cdev memory. Add sirefs
count to track both number of threads inside the cdev methods, and for
single-bit indicator that cdev is being destroyed. In the later case,
the call is redirected to the dummy cdev.
Reviewed by: markj
Discussed with: hselasky
Tested by: zeising
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D18606
Currently we always return false if for PCI offline query.
Try to read PCI config, if the return value if 0xffff probably the
PCI is offline.
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we hold a reference on the character device for every opened file
to prevent the character device to be freed prematurely.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
According to markj@:
pageproc contains the page daemon and laundry threads, which are
responsible for managing the LRU page queues and writing back dirty
pages. vmproc's main task is to swap out kernel stacks when the system
is under memory pressure, and swap them back in when necessary. It's a
somewhat legacy component of the system and isn't required. You can
build a kernel without it by specifying "options NO_SWAPPING" (which is
a somewhat misleading name), in which vm_swapout_dummy.c is compiled
instead of vm_swapout.c.
Based on this, we want pageproc to emulate kswapd, not vmproc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D18061
These are used by kms-drm to determine various heuristics relate
memory conditions.
The number of free swap pages is just a variable, and it can be
much cheaper by either adding a new getter, or simply extern'ing
swap_total. However, this patch opts to use the more expensive,
existing interface - since this isn't an operation in a high per
path.
This allows us to remove some more gpl linuxkpi and do the follo
kms-drm:
git rm linuxkpi/gplv2/include/linux/swap.h
Reviewed by: mmacy, Johannes Lundberg <johalun0@gmail.com>
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18052
Currently the compiler picks up the definition in machine/cpufunc.h.
Add compiler memory barriers to read* and write*. The Linux x86
implementation of these functions uses inline asm with "memory" clobber.
The Linux x86 implementation of read_relaxed* and write_relaxed* uses the
same inline asm without "memory" clobber.
Implement ioread* and iowrite* in terms of read* and write* so they also
have memory barriers.
Qualify the addr parameter in write* as volatile.
Like Linux, define macros with the same name as the inline functions.
Only define 64-bit versions on 64-bit architectures because generally
32-bit architectures can't do atomic 64-bit loads and stores.
Regroup the functions a bit and add brief comments explaining what they do:
- __raw_read*, __raw_write*: atomic, no barriers, no byte swapping
- read_relaxed*, write_relaxed*: atomic, no barriers, little-endian
- read*, write*: atomic, with barriers, little-endian
Add a comment that says our implementation of ioread* and iowrite*
only handles MMIO and does not support port IO.
Reviewed by: hselasky
MFC after: 3 days
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
While at it rename hlist_add_after() into hlist_add_behind().
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
the LinuxKPI. Add a comment saying in which Linux version this change was made.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
in the LinuxKPI. While at it document when to use the "virtual_address" or
the "address" field in the "vm_fault" structure.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
sg_alloc_table_from_pages() function in the LinuxKPI.
This basically allow segments to have a limit, max_segment.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
with upstream Linux by returning the pointer to the removed element.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
- Make sure Giant is locked when calling PCI device methods.
Newbus currently requires this.
- Avoid unlocking Giant right before aquiring the sleepqueue lock.
This can save a task switch.
MFC after: 1 week
Sponsored by: Mellanox Technologies
When disabling the MSIX IRQ vectors for a PCI device through the
LinuxKPI, make sure any old MSIX IRQ numbers are no longer visible to
the linux_pci_find_irq_dev() function else IRQs can be requested from
the wrong PCI device.
MFC after: 1 week
Sponsored by: Mellanox Technologies
instead of pause() in the msleep() function to avoid rounding errors when
converting delay values forth and back. Add a guard for a delay value
of zero milliseconds which is undefined.
MFC after: 1 week
Requested by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
delayed_work in the LinuxKPI. This allows the timer_pending() function
macro to be used with delayed work structures.
No functional nor structural change.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
signal in the LinuxKPI.
The read(), write() and mmap() system calls can return either EINTR or
ERESTART upon receiving a signal. Add code to figure out the correct
return value by temporarily storing the return code from the relevant
FreeBSD kernel APIs in the Linux task structure.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Make sure all RCU dereferencing use the READ_ONCE() function macro.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
printk_ratelimited() function macro to return a boolean stating if there
was a printout, true, or not, false.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
LinuxKPI to be compatible with Linux. No functional change.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
handler in the LinuxKPI. This is needed when the interrupt handler is disabled
before freeing the interrupt.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Older versions of GCC don't allow flexible array members in a union.
Use a zero length array instead.
MFC after: 1 week
Reported by: jbeich@
Sponsored by: Mellanox Technologies
When the owner of the wire reference releases the last reference, it
might be that the page was already attempted to be freed (but free
cannot be performed at that time due to wire). Check that the page
was removed from the object as the indicator of the free attempt and
finish the free operation if so.
Reported and tested by: Slava Shwartsman
Reviewed by: hselasky
Sponsored by: Mellanox Technologies
MFC after: 1 week
actually return the computed result instead of the input value.
This is a regression issue after r289572.
Found by: gcc6
MFC after: 3 days
Sponsored by: Mellanox Technologies
LinuxKPI task struct. Change type of "state" variable from "int" to
"atomic_t" to simplify code and avoid unneccessary casting.
MFC after: 1 week
Sponsored by: Mellanox Technologies
gets drained before invoking the work function. Else the timer
mutex may still be in use which can lead to use-after-free situations,
because the work function might free the work structure before returning.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Bump the FreeBSD version to force recompilation of external
kernel modules due to structure change.
PR: 222504
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
Sponsored by: Mellanox Technologies
have a scope ID. Change size of the searched scope ID to the full
16-bits. There can typically be more than 255 interfaces.
Suggested by: ae @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Workaround problem that ifa_ifwithaddr() also matches the scope ID of
the IPv6 address when searching for a maching IPv6 address. For now
simply try all valid scope IDs until a match is found.
MFC after: 1 week
Sponsored by: Mellanox Technologies
use of the linux_poll_wakeup() function from unsafe contexts, which
can lead to use-after-free issues.
Instead of calling linux_poll_wakeup() directly use the wake_up()
family of functions in the LinuxKPI to do this.
Bump the FreeBSD version to force recompilation of external kernel modules.
MFC after: 1 week
Sponsored by: Mellanox Technologies
in the VM area structure in the LinuxKPI when doing mmap() and that
unsupported bits are masked away.
While at it fix some redundant use of parenthesing inside some related
macros.
Found by: KrishnamRaju ErapaRaju <Krishna2@chelsio.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Such drivers attach to a vgapci bus rather than directly to a pci bus. For
the rest of the LinuxKPI to work correctly in this case, we override the
vgapci bus' ivars with those of the grandparent.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11932
after r319757.
1) Correct the return value from __wait_event_common() from 1 to 0 in
case the timeout is specified as MAX_SCHEDULE_TIMEOUT. In the other
case __ret is zero and will be substituted in the last part of the
macro with the appropriate value before return.
2) Make sure the "timeout" argument is casted to "int" before
evaluating negativity. Else the signedness of a "long" might be
checked instead of the signedness of an integer.
3) The wait_event() function should not have a return value.
Found by: KrishnamRaju ErapaRaju <Krishna2@chelsio.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
While there, switch to FreeBSD internal callout active status.
Reviewed by: markj, hselasky
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D11900
wide enough to hold the full 64-bit dev_t. Instead use the "dev" field in
the "linux_cdev" structure to store and lookup this value.
While at it remove superfluous use of parenthesis inside the
MAJOR(), MINOR() and MKDEV() macros in the LinuxKPI.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It looks like the __acquire and __release macros are for the consumption
of static analysis tools and have no semantic effect. Transform the
definitions from constant expressions to empty statements in order to
avoid -Wunused-value from gcc.
Likewise avoid future warnings for __chk_{user,io}_ptr, but with a cast
to void, because it looks like some linux kernel code may use those in
expression contexts.
Reviewed by: hselasky, markj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11695
Also add some checks for overflow to existing functions.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11533
Add io_mapping_init_wc() and add a third (unused) parameter to
io_mapping_map_wc().
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11286
list.h includes a number of FreeBSD headers as a workaround for the
LIST_HEAD name collision. To reduce pollution, avoid including list.h
in commonly used headers when it is not explicitly needed.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11249
In particular:
- Don't evaluate event conditions with a sleepqueue lock held, since such
code may attempt to acquire arbitrary locks.
- Fix the return value for wait_event_interruptible() in the case that the
wait is interrupted by a signal.
- Implement wait_on_bit_timeout() and wait_on_atomic_t().
- Implement some functions used to test for pending signals.
- Implement a number of wait_event_*() variants and unify the existing
implementations.
- Unify the mechanism used by wait_event_*() and schedule() to put the
calling thread to sleep.
This is required to support updated DRM drivers. Thanks to hselasky for
finding and fixing a number of bugs in the original revision.
Reviewed by: hselasky
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10986
ARM and MIPS fail universe builds.
ARM and MIPS are missing the following:
* VM_MEMATTR_WRITE_THROUGH
* VM_MEMATTR_WRITE_COMBINING
Pointy-hat to: jhibbits
arm, mips, and powerpc all implement pmap_mapdev_attr() and pmap_unmapdev(),
so add those archs to the checks. powerpc also includes the atomic_swap_*()
functions, so add that to the supported list as well. Not tested except by
compiling powerpc.
Reviewed by: markj
polling contexts in the LinuxKPI.
After the kqueue() support was added to the LinuxKPI in r319409 the
Linux poll file operation will be used outside the system file polling
callback function, which can cause a NULL-pointer panic inside
selrecord() because curthread->td_sel is set to NULL. This patch moves
the selrecord() call away from poll_wait() and to the system file poll
callback function in the LinuxKPI, which essentially wraps the Linux
one. This is similar to what the cuse(3) module is currently doing.
Refer to sys/fs/cuse/*.[ch] for more details.
MFC after: 1 week
Sponsored by: Mellanox Technologies
devices. The implementation allows read and write filters to be
created and piggybacks on the poll() file operation to determine when
a filter should trigger. The piggyback mechanism is simply to check
for the EWOULDBLOCK or EAGAIN return code from read(), write() or
ioctl() system calls and then update the kqueue() polling state bits.
The implementation is similar to the one found in the cuse(3) module.
Refer to sys/fs/cuse/*.[ch] for more details.
MFC after: 1 week
Sponsored by: Mellanox Technologies
printk_ratelimited() in the LinuxKPI.
While at it fix the inclusion guard of printk.h to be similar to the
rest of the LinuxKPI header files.
MFC after: 1 week
Sponsored by: Mellanox Technologies
task structure to avoid deadlock when tearing down the VM object
during a process exit.
Found by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Allow "struct linux_file" to be refcounted when its "_file" member
is NULL by using its "f_count" field. The reference counts are
transferred to the file structure when the file descriptor is
installed.
- Add missing vdrop() calls for error cases during open().
- Set the "_file" member of "struct linux_file" during open. This
allows use of refcounting through get_file() and fput() with LinuxKPI
character devices.
MFC after: 1 week
Sponsored by: Mellanox Technologies
