This avoids -Wcast-align warnings from clang when upcasting from
struct nvmf_fabric_cmd to struct nvmf_fabric_prop_set_cmd.
Reported by: bapt
Sponsored by: Chelsio Communications
The protocol structures do not need explicit packing and static
assertions verify the size of all the structures as well as the
offsets of several key fields. The pragma triggers warnings when
building with GCC.
Sponsored by: Chelsio Communications
Follow the rest of the vchan.c naming convention.
No functional change intended.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D45016
pcm/sound.* contains code that should be part of pcm/vchan.*.
Changes:
- pcm_setvchans() -> vchan_setnew()
- pcm_setmaxautovchans() -> vchan_setmaxauto()
- hw.snd.maxautovchans moved to pcm/vchan.c
- snd_maxautovchans declaration moved to pcm/vchan.h and definition to
pcm/vchan.c
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch, markj
Differential Revision: https://reviews.freebsd.org/D45015
These fields and devices are unused as of e8c0d15a64 ("sound: Get rid
of snd_clone and use DEVFS_CDEVPRIV(9)").
While here, remove unused SND_DEV_* defines from pcm/sound.h and convert
the list to an enum.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch, markj
Differential Revision: https://reviews.freebsd.org/D45013
hw.snd.version and SND_DRV_VERSION define the sound driver version and
are meant to be used in bug reports, but because these values are
constant, there is not much useful information we can extract from them.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch, emaste
Differential Revision: https://reviews.freebsd.org/D44996
We should normally never enter these cases.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: markj, emaste
Differential Revision: https://reviews.freebsd.org/D44994
Follow-up of b3ea087c05 ("sound: Merge
pcm_chn_destroy() and chn_kill()")
While here, add device_printf()'s to all failure points. Also fix an
existing bug where we'd unlock an already unlocked channel, in case we
went to "out" (now "out2") before locking the channel.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch
Differential Revision: https://reviews.freebsd.org/D44993
Previously it was only possible to enable target mode for these drivers
by rebuilding the kernel with AHC_TMODE_ENABLE or AHD_TMODE_ENABLE and a
bitmask of which units to statically enable for target mode.
There is no space-savings in the driver by not having AHC_TMODE_ENABLE
set, so in addition to the compile time option lets also introduce some
tunables:
hint.ahc.<unit>.tmode_enable=0/1
hint.ahd.<unit>.tmode_enable=0/1
For compatibility the old behavior is retained, but it can be overridden
with tunables
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp, mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/1208
aicasm just puts the value of the "-i" passed include file in the
generated file with quotes around it. This means that there are manual
edits made to aic7xxx_reg_print.c and aic79xx_reg_print.c
now we check to see if the value passed to '-i' starts with a '<', if it
does don't output the quotes.
Signed-off-by: HP van Braam <hp@tmm.cx>
Reviewed by: imp (minor code simplification)
Pull Request: https://github.com/freebsd/freebsd-src/pull/1209
Summary:
Though mostly used in x86 devices, TPM can be used on others, with a
direct SPI attachment. Refactor the TPM 2.0 driver set to use an
attachment interface, and implement a SPI bus interface.
Test Plan:
Tested on a Raspberry Pi 4, with a GeeekPi TPM2.0 module (SLB9670
TPM) using security/tpm2-tools tpm2_getcaps for very light testing against the
spibus attachment.
Reviewed by: kd
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D45069
This is the server (target in SCSI terms) for NVMe over Fabrics.
Userland is responsible for accepting a new queue pair and receiving
the initial Connect command before handing the queue pair off via an
ioctl to this CTL frontend.
This frontend exposes CTL LUNs as NVMe namespaces to remote hosts.
Users can ask LUNS to CTL that can be shared via either iSCSI or
NVMeoF.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44726
This is the client (initiator in SCSI terms) for NVMe over Fabrics.
Userland is responsible for creating a set of queue pairs and then
handing them off via an ioctl to this driver, e.g. via the 'connect'
command from nvmecontrol(8). An nvmeX new-bus device is created
at the top-level to represent the remote controller similar to PCI
nvmeX devices for PCI-express controllers.
As with nvme(4), namespace devices named /dev/nvmeXnsY are created and
pass through commands can be submitted to either the namespace devices
or the controller device. For example, 'nvmecontrol identify nvmeX'
works for a remote Fabrics controller the same as for a PCI-express
controller.
nvmf exports remote namespaces via nda(4) devices using the new NVMF
CAM transport. nvmf does not support nvd(4), only nda(4).
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44714
Structurally this is very similar to the TCP transport for iSCSI
(icl_soft.c). One key difference is that NVMeoF transports use a more
abstract interface working with NVMe commands rather than transport
PDUs. Thus, the data transfer for a given command is managed entirely
in the transport backend.
Similar to icl_soft.c, separate kthreads are used to handle transmit
and receive for each queue pair. On the transmit side, when a capsule
is transmitted by an upper layer, it is placed on a queue for
processing by the transmit thread. The transmit thread converts
command response capsules into suitable TCP PDUs where each PDU is
described by an mbuf chain that is then queued to the backing socket's
send buffer. Command capsules can embed data along with the NVMe
command.
On the receive side, a socket upcall notifies the receive kthread when
more data arrives. Once enough data has arrived for a PDU, the PDU is
handled synchronously in the kthread. PDUs such as R2T or data
related PDUs are handled internally, with callbacks invoked if a data
transfer encounters an error, or once the data transfer has completed.
Received capsule PDUs invoke the upper layer's capsule_received
callback.
struct nvmf_tcp_command_buffer manages a TCP command buffer for data
transfers that do not use in-capsule-data as described in the NVMeoF
spec. Data related PDUs such as R2T, C2H, and H2C are associated with
a command buffer except in the case of the send_controller_data
transport method which simply constructs one or more C2H PDUs from the
caller's mbuf chain.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44712
nvmf_transport.ko provides routines for managing NVMeoF queue pairs
and capsules. It provides a glue layer between transports (such as
TCP or RDMA) and an NVMeoF host (initiator) and controller (target).
Unlike the synchronous API exposed to the host and controller by
libnvmf, the kernel's transport layer uses an asynchronous API built
on callbacks. Upper layers provide callbacks on queue pairs that are
invoked for transport errors (error_cb) or anytime a capsule is
received (receive_cb).
Data transfers for a command are usually associated with a callback
that is invoked once a transfer has finished either due to an error
or successful completion.
For an upper layer that is a host, command capsules are allocated and
populated with an NVMe SQE by calling nvmf_allocate_command. A data
buffer (described by a struct memdesc) can be associated with a
command capsule before it is transmitted via nvmf_capsule_append_data.
This function accepts a direction (send vs receive) as well as the
data transfer callback. The host then transmits the command via
nvmf_transmit_capsule. The host must ensure that the data buffer
described by the 'struct memdesc' remains valid until the data
transfer callback is called. The queue pair's receive_cb callback
should match received response capsules up with previously transmitted
commands.
For the controller, incoming commands are received via the queue
pair's receive_cb callback. nvmf_receive_controller_data is used to
retrieve any data from a command (e.g. the data for a WRITE command).
It can be called multiple times to split the data transfer into
smaller sizes. This function accepts an I/O completion callback that
is invoked once the data transfer has completed.
nvmf_send_controller_data is used to send data to a remote host in
response to a command. In this case a callback function is not used
but the status is returned synchronously. Finally, the controller can
allocate a response capsule via nvmf_allocate_response populated with
a supplied CQE and send the response via nvmf_transmit_capsule.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44711
This includes functions to validate NVMe Qualified Names, compute an
initial value of the CAP property, validate changes to the CC
property, and populate the Identify Controller data structure for an
I/O controller.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44709
- Helper macros for specific SGL types used with the TCP transport
- An inline function which validates various fields in TCP PDUs
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44708
This defines structures, ioctl commands, and related constants used
for both the Fabrics host and controller.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44706
- Add opcode, command structure, and new error code for Disconnect
fabrics opcode.
- Add a generic struct nvmf_fabric_command.
- Add constants for special controller ID values.
- Add constants for the cattr field in the Connect command and the
default value for the kato field in the Connect command.
- Add constants for the offset of controller properties (Fabrics
version of controller registers).
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44705
- Replace SPDK_STATIC_ASSERT with _Static_assert.
- Remove SPDK_ and spdk_ prefixes from types and constants.
- Switch to using FreeBSD headers, e.g. <dev/nvme/nvme.h> in place of
"spdk/nvme_spec.h".
- Add a definition of NVME_NQN_FIELD_SIZE (from SPDK's nvme_spec.h).
- Remove constant for the fabrics opcode as this is already present in
<dev/nvme/nvme.h>.
- Use types from <dev/nvme/nvme.h> for NVMe structures including
struct nvme_sgl_descriptor, struct nvme_command, and
struct nvme_completion.
- Use plain uint16_t in place of struct spdk_nvme_status.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44704
This is a copy of spdk/include/spdk/nvmf_spec.h as of commit
470e851852bb948334a272c9f8de495020fa082f from Intel's SPDK.
Subsequent commits will modify it to be suitable header for the
kernel, but importing the stock file first makes it easier to see
how the resulting header is derived from the original.
Reviewed by: imp
Obtained from: SPDK (https://github.com/spdk/spdk.git)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44703
This affects TOE operation when multiple rx c-channels are in use for
offload, which is an unusual configuration.
MFC after: 1 week
Sponsored by: Chelsio Communications
It is the equivalent of tx_chan but for receive so rx_chan is a better
name. Initialize both using helper functions and make sure both are
displayed in the sysctl MIB.
MFC after: 1 week
Sponsored by: Chelsio Communications
PORTVEC obtained from the firmware is the authoritative source of this
information, and nports (calculated from PORTVEC) is available by the
time t4_port_init runs.
MFC after: 1 week
Sponsored by: Chelsio Communications
In cd85379104, kib made maxphys a load-time tunable. This made
the #define MAXPHYS in sys/param.h almost entirely obsolete, as
it could now be overridden by kern.maxphys at boot time, or by
opt_maxphys.h.
However, decades of tradition have led to several new, incorrect, uses
of MAXPHYS in other parts of the kernel, mostly by seasoned
developers. I've corrected those uses here in a mechanical fashion,
and verified that it fixes a bug in the md driver that I was
experiencing.
Since using MAXPHYS is such an easy mistake to make, it is best to
hide it from the kernel namespace. So I've moved its definition to
_maxphys.h, which is now included in param.h only for userspace.
That brings up the fact that lots of userspace programs use MAXPHYS
for different reasons, most of them probably wrong. Userspace consumers
that really need to know the value of maxphys should probably be
changed to use the kern.maxphys sysctl. But that's outside the scope
of this change.
Reviewed by: imp, jkim, kib, markj
Fixes: 30038a8b4e ("md: Get rid of the pbuf zone")
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D44986
All the channels are not used on all boards and there's no point
allocating taskqueues that will never be used.
MFC after: 1 week
Sponsored by: Chelsio Communications
The firmware clears the interrupts already and it has a better idea of
exactly what to clear for which generation of the ASIC. There is no
need for the driver to get involved.
MFC after: 1 week
Sponsored by: Chelsio Communications
Hook in RSS glue.
Default to "off" for the split header feature to ensure netmap
compatibility.
Change the PCS indirection register values based on hardware type
(ported from Linux).
Move tunable settings to sysctl_init() and set the defaults there.
Ensure it's called at the right time by moving it back.
Reset PHY RX data path when mailbox command times out (Ported from
Linux).
Check if VLAN HW tagging is enabled before assuming a VLAN tag
is present in a descriptor.
Disable the hardware filter since multicast traffic is dropped
in promisc mode.
Remove unnecessary return statement.
Missing sfp_get_mux, causing a race between ports to read
SFP(+) sideband signals.
Validate and fix incorrectly initialized polarity/configuration
registers.
Remove unnecessary SFP reset.
axgbe_isc_rxd_pkt_get has no error state, remove unnecessary
big packet check.
Enable RSF to prevent zero-length packets while in Netmap mode.
DMA cache coherency update (ported from Linux).
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/1103
This check is not related to channel initializion, but is also
unnecessary, since sysctl_hw_snd_timeout() takes care of checking if
chn_timeout is within bounds.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D44992
Improve code layering. These are channel functions, and so they do not
belong in pcm/sound.c.
While here, assert in chn_ref() that new refcount won't be negative.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D44985
pcm_chn_destroy() acts like a wrapper around chn_kill(), and
additionally calls a few more functions that should in fact be part of
chn_kill()'s logic. Merge pcm_chn_destroy()'s functionality in
chn_kill() to improve readability, as well as code layering.
While here, convert chn_kill() to void as it currently always returns 0.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D44984
The unit.* code is largely obsolete and imposes limits that are no
longer needed nowadays.
- Capping the maximum allowed soundcards in a given machine. By default,
the limit is 512 (snd_max_u() in unit.c), and the maximum possible is
2048 (SND_UNIT_UMAX in unit.h). It can also be tuned through the
hw.snd.maxunit loader(8) tunable. Even though these limits are large
enough that they should never cause problems, there is no need for
this limit to exist in the first place.
- Capping the available device/channel types. By default, this is 32
(snd_max_d() in unit.c). However, these types are pre-defined in
pcm/sound.h (see SND_DEV_*), so the cap is unnecessary when we know
that their number is constant.
- Capping the number of channels per-device. By default, the limit 1024
(snd_max_c() in unit.c). This is probably the most problematic of the
limits mentioned, because this limit can never be reached, as the
maximum is hard-capped at either hw.snd.maxautovchans (16 by default),
or SND_MAXHWCHAN and SND_MAXVCHANS.
These limtits are encoded in masks (see SND_U_MASK, SND_D_MASK,
SND_C_MASK in unit.h) and are used to construct a bitfield of the form
[dsp_unit, type, channel_unit] in snd_mkunit() which is assigned to
pcm_channel->unit.
This patch gets rid of everything unit.*-related and makes a slightly
different use of the "unit" field to only contain the channel unit
number. The channel type is stored in a new pcm_channel->type field, and
the DSP unit number need not be stored at all, since we can fetch it
from device_get_unit(pcm_channel->dev). This change has the effect that
we no longer need to impose caps on the number of soundcards,
device/channel types and per-device channels. As a result the code is
noticeably simplified and more readable.
Apart from the fact that the hw.snd.maxunit loader(8) tunable is also
retired as a side-effect of this patch, sound(4)'s behavior remains the
same.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: dev_submerge.ch
Differential Revision: https://reviews.freebsd.org/D44912
