Commit graph

6 commits

Author SHA1 Message Date
Andriy Voskoboinyk
9dba612805 rtwn_usb: add support for fragmented Rx.
Since device can pass multiple frames in a single payload temporary
Rx buffer was big enough to hold all of them; now the driver can
concatenate a single frame from multiple payloads.

The Rx buffer size may be configured via tunable (dev.rtwn.%d.rx_buf_size).

Tested with:
 - rtl8188cus, rtl8188eu and rtl8821au (STA mode).
 - (by kevlo) rtl8192cu and rtl8188eu.

PR:		218527
Reviewed by:	kevlo
Differential Revision:	https://reviews.freebsd.org/D11705
2017-07-30 23:35:21 +00:00
Andriy Voskoboinyk
3737697159 rtwn_usb: reject too long (>16K) mbufs.
While here move RTWN_TXBUFSZ constant from common to USB specific code
(it's not used anywhere else).
2017-07-04 07:07:08 +00:00
Andriy Voskoboinyk
0866194cab rtwn_usb(4): fix Rx buffer size calculation.
Use device-specific Rx buffer size to ensure that data will not be
truncated + add a warning if truncation was detected (the driver
cannot handle this case correctly yet).

Tested with:
 - RTL8188CUS, RTL8188EU and RTL8821AU, STA / AP modes.
2017-01-08 23:41:17 +00:00
Andriy Voskoboinyk
d067ef0f0d rtwn: add HOSTAP / IBSS mode support for RTL8188CE.
NOTE: some multi-vap configurations (e.g., STA+IBSS) are not stable;
that will be fixed later.

Tested with:
 - RTL8188CE, STA + AP mode;
 - RTL8188CE, IBSS mode;
 - RTL8188CUS, IBSS mode;
 - RTL8188EU, IBSS mode.

Relnotes:	yes
2016-11-06 23:13:13 +00:00
Andriy Voskoboinyk
77cbc47958 rtwn_pci: omit tx_done() stage if device is not running.
rtwn_usb: drain USB transfers during device shutdown; this fixes possible
panic with 'options IEEE80211_SUPPORT_SUPERG' during device detach.

Tested with RTL8188CE, STA mode.
2016-11-06 19:17:39 +00:00
Andriy Voskoboinyk
7453645f2a rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes
2016-10-17 20:38:24 +00:00