This most importantly reduces duplication, but it also removes any potential
race with usage of dev->si_drv1 since it's now set prior to the device being
constructed enough to be accessible.
This simplifies the driver's rx fast path as well as the bookkeeping
code that tracks various rx buffer sizes and layouts.
MFC after: 1 week
Sponsored by: Chelsio Communications
ext_arg2 is the only item in the third cacheline in an mbuf and could be
cold by the time rxb_free runs. Put the information needed by rxb_free
in the same line as the refcount, which is very likely to be hot given
that rxb_free runs when the refcount is decremented and reaches 0.
MFC after: 1 week
Sponsored by: Chelsio Communications
requested.
This is a tradeoff between PCIe efficiency during large packet rx and
packing efficiency during small packet rx.
MFC after: 1 week
Sponsored by: Chelsio Communications
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.
The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.
Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision: https://reviews.freebsd.org/D23389
This driver has seen no real changes for almost 20 years. It's for
hardware that's 25 years old. It has no reports of active use, nor
has it been seen in the NYCBug dmesg database at all. Schedule
its removal for 13.0.
Reviewed by: rgrimes@ (earlier version)
Relnote: Yes
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D23403
As Ian Lepore noted, writing ~1 to a register might have a completely
different effect than doing a regular read-modify-write operation.
Follow the TCG_PC_Client_Platform_TPM_Profile_PTP_2.0_r1.03_v22
datasheet instead, and use the actual values mentioned there:
(uint32_t)1 to cancel the command, (uint32_t)0 to clear the field.
MFC after: 3 days
tpmtis_go_ready() read the value of the TPM_STS register, ORed
TPM_STS_CMD_READY with it, and wrote it back. However, the TPM Profile
(PTP) specification states that only one bit in the write request value may
be set to 1, or else the entire write request is ignored.
Fix by just writing TPM_STS_CMD_READY.
Similarly, remove the call which clears the TPM_STS_CMD_READY flag in the
same function. It was being ignored for the same reason.
Submitted by: Darrick Lew <darrick.freebsd AT gmail.com>
Reviewed by: vangyzen, myself
MFC after: if you care about stable, you might want to do so
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23081
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
In this case, the intent was to clear the zeroth bit, and leave the rest
unaffected. Therefore, the ~ operator should be used instead.
Noticed by: cem
MFC after: 3 days
Make sure all receive completion callbacks are covered by the network
EPOCH(9), because this is required when calling if_input() and
ether_input() after r357012.
Convert some spaces to tabs while at it.
Sponsored by: Mellanox Technologies
ahd_inb() returns type uint8_t. The shift left by untyped 24 implicitly
promotes the result to type (signed) int. Then the binary OR with uint64_t
values sign-extends the integer. If bit 31 of the read value happened to be
set, the 64-bit result would have all upper 32 bits set to 1 due to OR. This
is clearly not intended.
Reported by: Coverity
CID: 980473 (old one!)
Make completion event path mostly lockless using EPOCH(9).
Implement a mechanism using EPOCH(9) which allows us to make
the callback path for completion events mostly lockless.
Simplify draining callback events using epoch_wait().
While at it make sure all receive completion callbacks are
covered by the network EPOCH(9), because this is required
when calling if_input() and ether_input() after r357012.
Sponsored by: Mellanox Technologies
ThinkPad PrivacyGuard is a built-in toggleable privacy filter that
restricts viewing angles when on. It is an available on some new
ThinkPad models such as the X1 Carbon 7th gen (as an optional HW
upgrade).
The privacy filter can be enabled/disabled via an ACPI call. This commit
adds a sysctl under dev.acpi_ibm that allows for getting and setting the
PrivacyGuard state.
Submitted by: Kamila Součková <kamila@ksp.sk>
Reviewed By: cem, philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23370
Make sure all occurrences of ieee80211_input_xxx() in sys/dev are
covered by a network epoch section. Do not depend on the interrupt
handler nor any taskqueues being in a network epoch section.
This patch should unbreak the PCI WLAN drivers after r357004.
Pointy hat: glebius@
Sponsored by: Mellanox Technologies
While here, clean up magic numbers.
The memset(,0,) (and M_ZERO!) can just be removed; the bit_alloc() API already
zeros the allocation.
No functional change.
Reported by: Coverity
CID: 1378286
All of these uses of sizeof() were on the wrong type in relation to the pointer
passed to SYSCTL_ADD_PROC as arg1. Fortunately, none of the handlers actually
use arg2. So just don't pass a (non-zero) arg2.
Reported by: Coverity
CID: 1007701
Probe Family 17h CPUs for up to 4 (Zen, Zen+) or 8 (Zen2) CCD temperature
sensors. These were discovered by Ondrej Čerman
(https://github.com/ocerman) and collaborators experimentally, and are not
currently documented in any datasheet I have access to.
One more instance of if_input being called outside of
interrupt, by means of msk_handle_events.
Differential Revision: https://reviews.freebsd.org/D23379
These should not be any functional change. While the change in
emul10kx-pcm.c looks like a real bug fix (as opposed to inconsistent
whitespace), the extra statements were not harmful.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23363
o Make the pci_host_generic_acpi_attach() globally visible.
o Declare a new driver class.
These will be used by a new PCI root complex driver.
Sponsored by: DARPA, AFRL
We observe at least one problem: if a UDP socket is connect(2)-ed, then a
received packet that matches the connection cannot be matched to the
corresponding PCB because of an incorrect flow ID. That was oberved for DNS
requests from the libc resolver. We got this problem because FreeBSD
r343291 enabled code that can set rsstype of received packets to values
other than M_HASHTYPE_OPAQUE_HASH. Earlier that code was under 'ifdef
notyet'.
The essence of this change is to use the system-wide RSS key instead of
some historic hardcoded key when the software RSS is enabled and it is
configured to use Toeplitz algorithm (the default).
In all other cases, the driver reports the opaque hash type for received
packets while still using Toeplitz algorithm with the internal key.
PR: 242890
Reviewed by: pkelsey
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D23147
This bus does not really have a concept of the initiator ID, so use
a guaranteed dummy one that won't conflict with any real target.
This change fixes a problem with virtio_scsi on GCE where disks get
sequential target IDs starting from one. If there are seven or more
disks, then a disk with the target ID of seven would not be discovered
by FreeBSD as that ID was reserved as the initiator ID -- see
scsi_scan_bus().
Discussed with: bryanv
MFC after: 2 weeks
Sponsored by: Panzura
supposedly may call into ether_input() without network epoch.
They all need to be reviewed before 13.0-RELEASE. Some may need
be fixed. The flag is not planned to be used in the kernel for
a long time.
The vnode pager does not want the object lock held. Moving this out allows
further object lock scope reduction in callers. While here add some missing
paging in progress calls and an assert. The object handle is now protected
explicitly with pip.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23033
On a MINIMAL kernel, mps.ko wouldn't load because it uses the xpt_hold_boot
symbol from CAM, but didn't have a dependency on cam(4).
(CEM: Some context: when linking loaded modules, the kernel dynamic linker
only looks for definitions in explictly marked dependency modules. Also,
the identical mpr(4) driver uses the same CAM function, but already had the
correct MODULE_DEPEND(), so no similar change is needed there.)
Submitted by: Greg V <greg AT unrelenting.technology>
Reviewed by: imp, myself
Differential Revision: https://reviews.freebsd.org/D23272
This is a qspi driver for the Xilinx Zynq-7000 chip.
It could be useful for anyone wanting to boot a system from flash memory
instead of SD cards.
Submitted by: Thomas Skibo (thomasskibo@yahoo.com)
Differential Revision: https://reviews.freebsd.org/D14698
Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
Some consumer cannot know the voltage of the regulator without it.
While here, refuse to attach is min_voltage != max_voltage, it
shouldn't happens anyway.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23003
This change is based on Linux commit 40630f462824ee. csio.resid should
account for transfer_len only for success and SRB_STATUS_DATA_OVERRUN
condition.
I am not sure how exactly this change works, but I have a report from a
user that they see lots of checksum errors when running a pool scrub
concurrently with iozone -l 1 -s 100G. After applying this patch the
problem cannot be reproduced.
Reviewed by: nobody
Sponsored by: CyberSecure
Differential Revision: https://reviews.freebsd.org/D22312
than 128MB, which is the maximum supported by the hardware in RDMA mode.
Obtained from: Chelsio Communications
MFC after: 3 days
Sponsored by: Chelsio Communications
The netmap passthrough subsystem requires proper support in the
hypervisor. In particular, two PCI device ids (from the Red Hat
PCI vendor id 0x1b36) need to be assigned to the two netmap
virtual devices. We then disable these devices until the ids have
not been assigned, in order to avoid conflicts with other
virtual devices emulated by upstream QEMU.
PR: 241774
MFC after: 3 days
Fix a mistake introduced by r343291, which ported the vmx(4)
driver to iflib.
In case of TSO, the hlen field of the (first) tx descriptor must
be initialized to the cumulative length of Ethernet, IP and TCP
headers. The length of the TCP header was missing.
PR: 236999
Reported by: pkelsey
Reviewed by: avg
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22967
Highlights:
- Exit early if we're not disabling unused regulators; there's no need to
take the regulator topology lock and re-evaluate this every iteration, as
it's not going to change.
- Don't emit a notice that we're shutting down a regulator if it's not
enabled, to reduce noise.
- Mention the outcome of the shutdown, to aide debugging and easily let
developer/user collect list of regulators we actually shutdown to
determine problematic one.
Reviewed by: manu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22213
The patch could be simplier, using only the second chunk to
vtnet_rxq_eof(), that passes full mbufs to pfil(9). Packet
filter would m_free() them in case of returning PFIL_DROPPED.
However, we pretend to be a hardware driver, so we first try
to pass a memory buffer via PFIL_MEMPTR feature. This is mostly
done for debugging purposes, so that one can experiment in bhyve
with packet filters utilizing same features as a true driver.
We use to handle each message separately in i2c_transfer but that cannot
work with message with NOSTOP as it confuses the controller that we disable
the interrupts and start a new message.
Handle every message in the interrupt handler and fire a new start condition
if the previous message have NOSTOP, the controller understand this as a
repeated start.
This fixes booting on Allwinner A10/A20 platform where before the i2c controller
used to write 0 to the PMIC register that control the regulators as it though that
this was the continuation of the write message.
Tested on: A20 BananaPi, Cubieboard 1 (kevans)
Reported by: kevans
MFC after: 1 month
This avoids getting the XHCI_TRB_ERROR_CONTEXT_STATE error code from the XHCI
controller when the endpoint is disabled or already stopped.
Suggested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
The newer versions of RPi FDT flipped the order of the interrupts
specification and added an 'interrupt-names' property for driver aide in
finding the correct interrupt, rather than assuming the positions. Use it if
it's available, or fallback to the old method if there is no interrupt-names
property with a usb value.
This has been tested with both old RPi3B FDT and new RPi3B FDT, USB again
works on the latter.
Reported by: Tom Yan <tom.ty89 gmail com>
MFC after: 3 days
Do not configure any endpoint twice, but instead keep track of which
endpoints are configured on a per device basis, and use an evaluate
endpoint context command instead. When changing the configuration make
sure all endpoints get deconfigured and the configured endpoint mask
is reset.
This fixes an issue where an endpoint might stop working if there is
an error and the endpoint needs to be reconfigured as a part of the
error recovery mechanism in the FreeBSD USB stack.
Tested by: Shichun.Ma@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies
Virtualise tcp_always_keepalive, TCP and UDP log_in_vain. All three are
set in the netoptions startup script, which we would love to run for VNETs
as well [1].
While virtualising the log_in_vain sysctls seems pointles at first for as
long as the kernel message buffer is not virtualised, it at least allows
an administrator to debug the base system or an individual jail if needed
without turning the logging on for all jails running on a system.
PR: 243193 [1]
MFC after: 2 weeks
Move the decision to take an early exit from that function after adding
children based on FDT data into the #ifdef FDT block, so that it doesn't
offend coverity's notion of how the code should be written. (What's the
point of compilers optimizing away dead code if static analyzers won't
let you use the feature in conjuction with an #ifdef block?)
Reported by: coverity via vangyzen@
has a non-NULL child bus stored in it, so the "none" value can't be zero
since that's a valid array index. Also, when adding all possible buses
because there is no specific per-bus config, there's no need to reset
sc->maxbus on each loop iteration, it can be set once after the loop.
This method is supposed to write the voltage into uvolt
and return an errno compatible value.
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D23006
Don't wait until the vtnet_debugnet_init() call happens, because at that
point we might already have allocated something from
vtnet_tx_header_zone.
Some systems showed this panic:
vtnet0: link state changed to UP
panic: keg vtnet_tx_hdr initialization after use.
cpuid = 5
time = 1578427700
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004db427f0
vpanic() at vpanic+0x17e/frame 0xfffffe004db42850
panic() at panic+0x43/frame 0xfffffe004db428b0
uma_zone_reserve() at uma_zone_reserve+0xf6/frame 0xfffffe004db428f0
vtnet_debugnet_init() at vtnet_debugnet_init+0x77/frame 0xfffffe004db42930
debugnet_any_ifnet_update() at debugnet_any_ifnet_update+0x42/frame 0xfffffe004db42980
do_link_state_change() at do_link_state_change+0x1b3/frame 0xfffffe004db429d0
taskqueue_run_locked() at taskqueue_run_locked+0x178/frame 0xfffffe004db42a30
taskqueue_run() at taskqueue_run+0x4d/frame 0xfffffe004db42a50
ithread_loop() at ithread_loop+0x1d6/frame 0xfffffe004db42ab0
fork_exit() at fork_exit+0x80/frame 0xfffffe004db42af0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe004db42af0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100011 ]
Stopped at kdb_enter+0x37: movq $0,0x1084eb6(%rip)
db>
Reviewed by: cem, markj
Differential Revision: https://reviews.freebsd.org/D23073
SSD capacity in laptops is growing faster then RAM size, so my original
guess seems too low on second thought. Hopefully nobody will build large
array of those crappy SSDs.
MFC after: 2 weeks
X-MFC-with: 356474
This allows cheapest DRAM-less NVMe SSDs to use some of host RAM (about
1MB per 1GB on the devices I have) for its metadata cache, significantly
improving random I/O performance. Device reports minimal and preferable
size of the buffer. The code limits it to 1% of physical RAM by default.
If the buffer can not be allocated or below minimal size, the device will
just have to work without it.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
In PR 243056 a user reports some spam from smartpqi(4). In particular,
the driver warns about an unrecognized PQI_CONF_TABLE_SECTION_SOFT_RESET
section (not yet defined in the driver, but handled in Linux), but this
doesn't cause any problems. The Linux driver also does not warn about
unrecognized sections.
Also do not log a warning when a device is added, since this is routine.
Lower severity to DISC, to match pqisrc_remove_device().
PR: 243056
Reviewed by: sbruno
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23023
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
r356147 removed a vm_page_activate() call, but this is required to
ensure that pages end up in the page queues in the first place.
Restore the pre-r356157 logic. Now, without the page lock, the
vm_page_active() check is racy, but this race is harmless.
Reviewed by: alc, kib
Reported and tested by: pho
Differential Revision: https://reviews.freebsd.org/D23024
Add a privilege check to the ixl_handle_nvmupd_cmd function, ensuring
that only privileged users are allowed to access the NVM update
interface.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reported by: markj@
Reviewed by: markj@, erj@, jeffrey.e.pieper@intel.com
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22870
This will soon be a dependency for machine/atomic.h on mips with the
introduction of 64-bit atomics; the scope here is pretty narrow, so throw it
here in the header just before systm.h, which includes machine/atomic.h
An i2c bus can be divided into segments which can be selectively connected
and disconnected from the main bus. This is usually done to enable using
multiple slave devices having the same address, by isolating the devices
onto separate bus segments, only one of which is connected to the main bus
at once.
There are several types of i2c bus muxes, which break down into two general
categories...
- Muxes which are themselves i2c slaves. These devices respond to i2c
commands on their upstream bus, and based on those commands, connect
various downstream buses to the upstream. In newbus terms, they are both
a child of an iicbus and the parent of one or more iicbus instances.
- Muxes which are not i2c devices themselves. Such devices are part of the
i2c bus electrically, but in newbus terms their parent is some other
bus. The association with the upstream bus must be established by
separate metadata (such as FDT data).
In both cases, the mux driver has one or more iicbus child instances
representing the downstream buses. The mux driver implements the iicbus_if
interface, as if it were an iichb host bridge/i2c controller driver. It
services the IO requests sent to it by forwarding them to the iicbus
instance representing the upstream bus, after electrically connecting the
upstream bus to the downstream bus that hosts the i2c slave device which
made the IO request.
The net effect is automatic mux switching which is transparent to slaves on
the downstream buses. They just do i2c IO they way they normally do, and the
bus is electrically connected for the duration of the IO and then idled when
it is complete.
The existing iicbus_if callback() method is enhanced so that the parameter
passed to it can be a struct which contains a device_t for the requesting
bus and slave devices. This change is done by adding a flag that indicates
the extra values are present, and making the flags field the first field of
a new args struct. If the flag is set, the iichb or mux driver can recast
the pointer-to-flags into a pointer-to-struct and access the extra
fields. Thus abi compatibility with older drivers is retained (but a mux
cannot exist on the bus with the older iicbus driver in use.)
A new set of core support routines exists in iicbus.c. This code will help
implement mux drivers for any type of mux hardware by supplying all the
boilerplate code that forwards IO requests upstream. It also has code for
parsing metadata and instantiating the child iicbus instances based on it.
Two new hardware mux drivers are added. The ltc430x driver supports the
LTC4305/4306 mux chips which are controlled via i2c commands. The
iic_gpiomux driver supports any mux hardware which is controlled by
manipulating the state of one or more gpio pins. Test Plan
Tested locally using a variety of mux'd bus configurations involving both
ltc4305 and a homebrew gpio-controlled mux. Tested configurations included
cascaded muxes (unlikely in the real world, but useful to prove that 'it all
just works' in terms of the automatic switching and upstream forwarding of
IO requests).
The number is public and has no "entropy," but should be integrated quickly
on VM rewind events to avoid duplicate sequences.
Approved by: csprng(markm)
Differential Revision: https://reviews.freebsd.org/D22946
If somebody else holds that lock, it will likely do the work for us.
If it won't, then we return here later and retry.
Under heavy load it allows to avoid lock congestion between interrupt and
polling threads.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Combined with earlier nstart/nend removal it allows to remove several locks
from request path of GEOM and few other places. It would be cool if we had
more SMP-friendly statistics, but this helps too.
Sponsored by: iXsystems, Inc.
Allow loadable modules that provide random entropy source(s) to safely
unload. Prior to this change, no driver could ensure that their
random_source structure was not being used by random_harvestq.c for any
period of time after invoking random_source_deregister().
This change converts the source_list LIST to a ConcurrencyKit CK_LIST and
uses an epoch(9) to protect typical read accesses of the list. The existing
HARVEST_LOCK spin mutex is used to safely add and remove list entries.
random_source_deregister() uses epoch_wait() to ensure no concurrent
source_list readers are accessing a random_source before freeing the list
item and returning to the caller.
Callers can safely unload immediately after random_source_deregister()
returns.
Reviewed by: markj
Approved by: csprng(markm)
Discussed with: jhb
Differential Revision: https://reviews.freebsd.org/D22489
With the previous reviews, the page lock is no longer required in order
to perform queue operations on a page. It is also no longer needed in
the page queue scans. This change effectively eliminates remaining uses
of the page lock and also the false sharing caused by multiple pages
sharing a page lock.
Reviewed by: jeff
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22885
Chase the removal of dev from gpioths_dht_readbytes() in r355540.
Reviewed by: ian
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D22926
srandom(9) is meaningless on SMP systems or any system with, say,
interrupts. One could never rely on random(9) to produce a reproducible
sequence of outputs on the basis of a specific srandom() seed because the
global state was shared by all kernel contexts. As such, removing it is
literally indistinguishable to random(9) consumers (as compared with
retaining it).
Mark random(9) as deprecated and slated for quick removal. This is not to
say we intend to remove all fast, non-cryptographic PRNG(s) in the kernel.
It/they just won't be random(9), as it exists today, in either name or
implementation.
Before random(9) is removed, a replacement will be provided and in-tree
consumers will be converted.
Note that despite the name, the random(9) interface does not bear any
resemblance to random(3). Instead, it is the same crummy 1988 Park-Miller
LCG used in libc rand(3).
Simplify RANDOM_LOADABLE by removing the ability to unload a LOADABLE
random(4) implementation. This allows one-time random module selection
at boot, by loader(8). Swapping modules on the fly doesn't seem
especially useful.
This removes the need to hold a lock over the sleepable module calls
read_random and read_random_uio.
init/deinit have been pulled out of random_algorithm entirely. Algorithms
can run their own sysinits to initialize; deinit is removed entirely, as
algorithms can not be unloaded. Algorithms should initialize at
SI_SUB_RANDOM:SI_ORDER_SECOND. In LOADABLE systems, algorithms install
a pointer to their local random_algorithm context in p_random_alg_context at
that time.
Go ahead and const'ify random_algorithm objects; there is no need to mutate
them at runtime.
LOADABLE kernel NULL checks are removed from random_harvestq by ordering
random_harvestq initialization at SI_SUB_RANDOM:SI_ORDER_THIRD, after
algorithm init. Prior to random_harvestq init, hc_harvest_mask is zero and
no events are forwarded to algorithms; after random_harvestq init, the
relevant pointers will already have been installed.
Remove the bulk of random_infra shim wrappers and instead expose the bare
function pointers in sys/random.h. In LOADABLE systems, read_random(9) et
al are just thin shim macros around invoking the associated function
pointer. We do not provide a registration system but instead expect
LOADABLE modules to register themselves at SI_SUB_RANDOM:SI_ORDER_SECOND.
An example is provided in randomdev.c, as used in the random_fortuna.ko
module.
Approved by: csprng(markm)
Discussed with: gordon
Differential Revision: https://reviews.freebsd.org/D22512
In the event of a MOD_LOAD failure, MOD_UNLOAD will be invoked to unwind
module load. Most of the reversion in MOD_LOAD can just be deferred to
normal MOD_UNLOAD cleanup, rather than duplicating the effort.
A NULL return of kbd_get_switch in the MOD_UNLOAD handler has been
downgraded from a panic to a successful return, as that certainly just means
that kbd_add_driver failed (not possible at the moment) and we have no work
to do.
r356087 made it rather innocuous to double-register built-in keyboard
drivers; we now set a flag to indicate that it's been registered and only
act once on a registration anyways. There is no misleading here, as the
follow-up kbd_delete_driver will actually remove the driver as needed now
that the linker set isn't also consulted after kbdinit.
This leads to the revert of r355806; this reduces duplication in keyboard
registration and driver switch lookup and leaves us with one authoritative
source for currently registered drivers. The reduced duplication later is
nice as we have more procedure involved in keyboard setup.
keyboard_driver->flags is used to more quickly detect bogus adds/removes.
From KPI consumers' perspective, nothing changes- kbd_add_driver of an
already-registered driver will succeed, and a single kbd_delete_driver will
later remove it as expected. In contrast to historical behavior,
kbd_delete_driver on a driver registered via linker set will now actually
de-register the driver so that it may not be used -- e.g. if kbdmux's
MOD_LOAD handler fails somewhere.
Detection for already-registered drivers in kbd_add_driver has improved, as
the previous SLIST_NEXT(driver) != NULL check would not have caught a driver
that's at the tail end.
kbdinit is now called from cninit() rather than via SYSINIT so that keyboard
drivers are available as early as console drivers. This is particularly
important as cnprobe will, in both syscons and vt, attempt to do any early
configuration of keyboard drivers built-in (see: kbd_configure).
Reviewed by: imp (earlier version, pre-cninit change)
Differential Revision: https://reviews.freebsd.org/D22835
Proper locking for atkbdc will likely replace the kbdc_lock mechanism
entirely with a mutex in atkbdc_softc, so that other consumers can also
properly ensure locking protocol is followed (e.g. psm.c:doinitialize).
The first step to doing this neatly is making KBDC less opaque so that
others don't have to jump through weird casting hoops to address the mutex.
No functional change intended; this diff effectively just removes a bunch of
casting. A future change may remove the KBDC typedef entirely and just opt
for using `atkbdc_softc_c *` directly, but this was decidedly a good
intermediate step to make these changes simple to audit.
in clang HEAD.
There was an invisible space in the middle of the tabs, and that apprently
was enough to throw off clang's column counting.
Even if clang is "incorrect" here, it's still a style(9) violation.
A missing check meant that unprivileged users could send passthrough
commands to the device firmware.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The rest were removed in r355936, which speculated that the cause of this
phenomenon was due to an inability to have an empty linker set. The comment
included with this one shows that this was, in fact, not the reason.
Regardless, syscons no longer seems to have an issue with not having any
keyboard drivers and in-fact ignores the keyboard probe anyways.
X-MFC-With: r355936
Analysis seems to reveal that sc->keyboard >= 0 implies sc->kbd != NULL and
there's no such scenario where sc->kbd is set (and theoretically used to
rebuild sc->keyboard) with the keyboard unavailable.
Drop the index softc. The index is only explicitly needed in few places, in
which case we can just as easily grab it from sc->kbd. There's no need for
keeping sc->kbd and sc->keyboard in sync when it can be readily accomplished
with just the former.
removed from objects including calls to free. Pages must not be xbusy
when freed and not on an object. Strengthen assertions to match these
expectations. In practice very little code had to change busy handling
to meet these rules but we can now make stronger guarantees to busy
holders and avoid conditionally dropping busy in free.
Refine vm_page_remove() and vm_page_replace() semantics now that we have
stronger guarantees about busy state. This removes redundant and
potentially problematic code that has proliferated.
Discussed with: markj
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22822
The VM generation counter is a 128-bit value exposed by the BIOS via ACPI.
The value changes to another unique identifier whenever a VM is duplicated.
Additionally, ACPI provides notification events when such events occur.
The driver decodes the pointer to the UUID, exports the value to userspace
via OPAQUE sysctl blob, and forwards the ACPI notifications in the form of
an EVENTHANDLER invocation as well as userspace devctl events.
See design paper: https://go.microsoft.com/fwlink/p/?LinkID=260709
The implementation was landed in r344913 and has had some bake time (at
least on my personal systems). There is some discussion of the motivation
for defaulting to this cipher as a PRF in the commit log for r344913.
As documented in that commit, administrators can retain the prior (AES-ICM)
mode of operation by setting the 'kern.random.use_chacha20_cipher' tunable
to 0 in loader.conf(5).
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22878
This effectively reverts r355935, but is functionally equivalent. We gain no
benefit from storing the index and repeatedly fetching the keyboard with
`kbd_get_keyboard` when we need it. We'll be notified when it's going away
so we can clean up the pointer.
All existing references were trivially converted. Only once instance
actually needed the index.
With absolutely no keyboards attached and no kbdmux in kernel, we descend
down this error path. 0 is a valid keyboard index, so leaving
vd->vd_keyboard at 0 when there's no keyboard found is objectively wrong as
later attachment of a keyboard will fail -- it gets index 0, and vt thinks
it's already using that keyboard.
This is decidedly the corniest of corner cases, but it's easy enough to get
correct that we should do so.
Tested in a kernel without atkbdc, atkbd, psm, kbdmux, ukbd, hyperv then
loading ukbd post-boot and attaching a usb keyboard.
Flip the knob added in r349154 to "enabled." The commit message from that
revision and associated code comment describe the rationale, implementation,
and motivation for the new default in detail. I have dog-fooded this
configuration on my own systems for six months, for what that's worth.
For end-users: the result is just as secure. The benefit is a faster, more
responsive system when processes produce significant demand on random(4).
As mentioned in the earlier commit, the prior behavior may be restored by
setting the kern.random.fortuna.concurrent_read="0" knob in loader.conf(5).
This scales the random generation side of random(4) somewhat, although there
is still a global mutex being shared by all cores and rand_harvestq; the
situation is generally much better than it was before on small CPU systems,
but do not expect miracles on 256-core systems running 256-thread full-rate
random(4) read. Work is ongoing to address both the generation-side (in
more depth) and the harvest-side scaling problems.
Approved by: csprng(delphij, markm)
Tested by: markm
Differential Revision: https://reviews.freebsd.org/D22879
The OpenCores I2C IP core can be found on any bus. Split out the PCI
bus specifics into their own file, only compiled on systems with PCI.
Reviewed by: kp
Sponsored by: Axiado
First reported against ESXi 5.0, PCI passthrough was not working due to
MSI-X issues. However, this issue was fixed via patch releases against
ESXi 5.5 and 6.0 in 2016. Given ESXi 5.5 and earlier have been EOL, this
patch removes the VMware MSI-X blacklist entries in the quirk table.
PR: 203874
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: VMware
Differential Revision: https://reviews.freebsd.org/D22819
The phy name may apparently be followed by a number in some systems.
Allow that.
PR: 242654
Reported and tested by: Marcel <marcel@brickporch.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Missing validation meant that it was possible to read 8 bytes beyond
the end of sfp_vpd_dump_buffer.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: delphij, ram
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22859
While a given ACPI device may have 0-N compatibility IDs, in practice most
seem to have 0 or 1. If one is present, emit it as part of the PNP info
string associated with a device. This could enable MODULE_PNP_INFO-based
automatic kldload for ACPI drivers associated with a given _CID (but without
a good _HID or _UID identifier).
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D22846
SIOCGAIRONET allows userspace to query an(4) for various device
properties and configuration, which appears to potentially include
sensitive information such as WEP keys (an(4) seems to predate WPA).
Also avoid races by copying in the request structure to a temporary
buffer before locking and modifying the device softc.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
It used to be required that a device be a child of gpiobus(4) to manipulate
gpio pins. That requirement didn't work well for FDT-based systems with many
cross-hierarchy users of gpio, so a more modern framework was created that
removed the old hierarchy requirement.
These changes adapt the owc_gpiobus driver to use the newer gpio_pin_*
functions to acquire, release, and manipulate gpio pins. This allows a
single driver to work for both hinted-attachment and fdt-based systems, and
removes the requirement that any one-wire fdt nodes must appear at the root
of the devicetree.
Differential Revision: https://reviews.freebsd.org/D22710
Nothing modifies these things, but const'ify out of an abundance of caution.
If we could const'ify the definition in each keyboard driver, I likely
would- improper mutations here can lead to misbehavior or slightly more
annoying to debug state.
This looks like a bit of debugging code that sliped into the initial
import of the new ATA framework. This changes the behavior to omit a
line of output that appears to have been intended for omission.
Reviewed by: mav
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22845
- PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL,
- & ~CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2);
was accidentally dropped from r355822 in the refactor. Restore it since 16-bit
cards may fail without it (some bridges autodetect this properly, so my laptop
worked when I tested it).
Noticed by: rpokala@
array with a singleton.
Also, pccbb isa attachment is never going to happen, do disconnect it from the
build (will delete this in future commit). It would need to be updated as well,
but since this code is effectively dead code, remove it from the build instead.
Keyboard drivers are generally registered via linker set. In these cases,
they're also available as kmods which use KPI for registering/unregistering
keyboard drivers outside of the linker set.
For built-in modules, we still fire off MOD_LOAD and maybe even MOD_UNLOAD
if an error occurs, leading to registration via linker set and at MOD_LOAD
time.
This is a minor optimization at best, but it keeps the internal kbd driver
tidy as a future change will merge the linker set driver list into its
internal keyboard_drivers list via SYSINIT and simplify driver lookup by
removing the need to consult the linker set.
This is needed after r355796. Some double-registration of kbd drivers needs
to be sorted out, then this sysinit will simply add these drivers into the
normal list and kill off any other bits in the driver that are aware of the
linker set, for simplicity.
The previous implementation relied on a kbdsw array that mirrored the global
keyboards array. This is fine, but also requires extra locking consideration
when accessing to ensure that it's not being resized as new keyboards are
added.
The extra pointer costs little in a struct that there are relatively few of
on any given system, and simplifies locking requirements ever-so-slightly as
we only need to consider the locking requirements of whichever method is
being invoked.
__FreeBSD_version is bumped as any kbd modules will need rebuilt following
this change.
Most keyboard drivers are using the genkbd implementations as it is;
formally use them for any that aren't set and make
genkbd_get_fkeystr/genkbd_diag private.
A future change will provide default implementations for some of these where
it makes sense and most of them are already using the genkbd
implementation (e.g. get_fkeystr, diag).
These invocations were directly calling enkbd_diag(), rather than
indirection back through kbdd_diag/kbdsw. While they're functionally
equivent, invoking kbdd_diag where feasible (i.e. not in a diag
implementation) makes it easier to visually identify locking needs in these
other drivers.
Don't hold the scheduler lock while doing context switches. Instead we
unlock after selecting the new thread and switch within a spinlock
section leaving interrupts and preemption disabled to prevent local
concurrency. This means that mi_switch() is entered with the thread
locked but returns without. This dramatically simplifies scheduler
locking because we will not hold the schedlock while spinning on
blocked lock in switch.
This change has not been made to 4BSD but in principle it would be
more straightforward.
Discussed with: markj
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22778
Eliminate recursion from most thread_lock consumers. Return from
sched_add() without the thread_lock held. This eliminates unnecessary
atomics and lock word loads as well as reducing the hold time for
scheduler locks. This will eventually allow for lockless remote adds.
Discussed with: kib
Reviewed by: jhb
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22626
Within command completion processing the callback function may access
DMAed data buffer. Synchronize it before use, not after.
This allows to use NVMe disk on non-DMA coherent arm64 system.
MFC after: 3 weeks
This #ifdef is misleading as there are actually no user-serviceable parts
inside and, as far as I can tell, there is no pollution leading from
userland to this header. Furthermore, it becomes a slight nuisance when
attempting to move things around in this header.
an exclusive object lock.
Previously swap space was freed on a best effort basis when a page that
had valid swap was dirtied, thus invalidating the swap copy. This may be
done inconsistently and requires the object lock which is not always
convenient.
Instead, track when swap space is present. The first dirty is responsible
for deleting space or setting PGA_SWAP_FREE which will trigger background
scans to free the swap space.
Simplify the locking in vm_fault_dirty() now that we can reliably identify
the first dirty.
Discussed with: alc, kib, markj
Differential Revision: https://reviews.freebsd.org/D22654
Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
CPL_TX_PKT_XT disables the internal parser on the chip and instead
relies on the driver to provide the exact length of the L2 and L3
headers. This allows hw checksumming and TSO to be used with L2 and
L3 encapsulations that the chip doesn't understand directly.
Note that netmap tx still uses the old CPL as it never uses the hw
to generate the checksum on tx.
Reviewed by: jhb@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22788
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
While there are subtle semantic differences between bool and boolean_t, none of
them matter in these cases. Prefer true/false when dealing with bool
type. Preserve a couple of TRUEs since they are passed into int args into CAM.
Preserve a couple of FALSEs when used for status.done, an int.
Differential Revision: https://reviews.freebsd.org/D20999
detach work and return the error. Especially don't call iicbus_reset()
since the most likely cause of failing to detach children is that one
of them has IO in progress.
This trims the boot time a bit more for AWS and other platforms that have nvme
drives. There's no reason too do this inline. This has been in my tree a while,
but IIRC I talked to Jim Harris about this at one of our face to face meetings.
MFC After: 2 weeks
Instead of first detaching the children(s) and then delete them,
use the device_delete_children function that does all of that.
MFC after: 1 month
Suggested by: ian
The driver used to always add the mmc device as it's child even
it no card was detected. Add a function that will detect if the
card is present or not and that will attach/detach the mmc device.
The function is either call on attach (as we won't have the interrupt
fired) or from two taskqueues. The first taskqueue will directly call
the function when the sdcard was present and is now removed and the other
one will delay a bit the attach when we didn't had a card and now have one.
This is mostly based on comments from the sdhci driver where it describe
a situation when the CD pin is detected before the others pins are connected.
MFC after: 1 month
This method will disable the regulators, clocks and assert the reset of
the module. It will also detach it's children (the mmc device) and release
it's resources.
While here enable the regulators on attach as we need them to power up
the sdcard or emmc.
MFC after: 1 month
The children of the bus need to do IO on the bus to probe for hardware
presence. Doing IO means timing the bus states using sbinuptime(), and
that requires working timecounters, which are not initialized until after
device attachment has completed.
PR: 242526
bus_get/set_resource methods are implemented in child device (iicbus).
As their implementation with bus_generic_rl_get/set calls do not
recurse up the tree, the versions in ig4 are never called.
Suggested by: jhb
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
TX_PKTS2 is more efficient within the firmware and this improves netmap
Tx by a few Mpps in some common scenarios.
MFC after: 1 week
Sponsored by: Chelsio Communications
These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.
Note that the firmwares are not uuencoded any more.
MFH: 1 month
Sponsored by: Chelsio Communications
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
As we do for many other laptops, put the headphone jack and speakers in
the same association by default so that the generic sound device
automatically switches between them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
of the sensor hardware. Part of the polling process involves signalling
the chip then waiting 20 milliseconds. This was being done with DELAY(),
which is a pretty rude thing to do in a callout. Now a taskqueue_thread
task is scheduled to do the polling, and because sleeping is allowed in
the task context, pause_sbt() replaces DELAY() for the 20ms wait.
This change enables the use of OpenFirmware Console (ofwcons), even when VGA is
available, allowing early kernel messages to be seen, that is important in case
of crashes before VGA console initialization.
This is specially useful in virtualized environments, where the user/developer
doesn't have full control of the virtualization engine (e.g. OpenStack).
The old behavior is preserved by default and, in order to use ofwcons, a few
tunables that have been introduced need to be set:
- hw.ofwfb.disable=1 - disable OFW FrameBuffer device
- machdep.ofw.mtx_spin=1 - change PPC OFW mutex to SPIN type, to match kernel
console's mutex type
- debug.quiesce_ofw=0 - don't call OFW quiesce, needed to keep ofwcons I/O
working
More details can be found at differential revision D20640.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20640
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
changed the sysctl format for the temperature from "I" to "IK", and
correspondingly changed the units from integer degrees C to decikelvin.
For access via sysctl(8) the output will be the same except that now
decimal fractions will be shown when available.
Previously the driver supported the DHT11 sensor. Now it supports
DHT11, DHT12, DHT21, DHT22, AM3201, AM3202.
All these chips are similar, differing primarily in supported temperature
and humidity ranges and accuracy (and, presumably, cost). There are two
basic data formats reported by the various chips, and it is possible to
figure out at runtime which format to use for decoding the data based on
the range of values in a single byte of the humidity measurement. (which
is detailed in a comment block, so I won't recapitulate it here).
functions to handle the sysctls, they all just access simple readonly
integer variables. There's no need to track the oids of the ones we add,
since the teardown is done by newbus code, not the driver itself.
Also remove the DDB code, because it just provides access to the same data
that the sysctls already provide.
At the end of a read cycle, set the gpio pin to INPUT rather than OUTPUT.
The state of the single-wire "bus" when idle should be high; setting the
pin to input allows the external pullup to pull the line high. Setting it
to output (and leaving it driving low) was leading a good read cycle followed
by one that would fail, and it just continued like that forever, effectively
reading the sensor once every 10 seconds instead of 5.
In the attach function, do an initial read from the device before registering
the sysctls for accessing the last-read values, to prevent reading spurious
values for the first 5 seconds after the driver attaches.
Do a callout_drain() in the detach function to prevent crashes after
unloading the module.
of gpio devices by using kenv to add hints for a new device and then do
'devctl rescan gpiobus4' to make the new device(s) attach.
It's not particularly easy to detect whether the 'at' hint has been deleted
for a child device that's currently attached, so this doesn't handle that.
But the user can use devctl commands to manually detach an existing device.
Don't needlessly pass around qpair pointers when the tracker knows what
qpair it's on. This will simplify code and make it easier to split
submission and completion queues in the future.
Signed-off-by: John Meneghini <johnm@netapp.com>
Uses two GPIO pins as MDC (clock) and MDIO (bidirectional I/O), relies
on mii_bitbang.
Tested on SG-3200 where the PHY for one of the ports is wired independently
of the SoC MDIO bus.
Sponsored by: Rubicon Communications, LLC (Netgate)
ConnectX-6 DX.
Currently TLS v1.2 and v1.3 with AES 128/256 crypto over TCP/IP (v4
and v6) is supported.
A per PCI device UMA zone is used to manage the memory of the send
tags. To optimize performance some crypto contexts may be cached by
the UMA zone, until the UMA zone finishes the memory of the given send
tag.
An asynchronous task is used manage setup of the send tags towards the
firmware. Most importantly setting the AES 128/256 bit pre-shared keys
for the crypto context.
Updating the state of the AES crypto engine and encrypting data, is
all done in the fast path. Each send tag tracks the TCP sequence
number in order to detect non-contiguous blocks of data, which may
require a dump of prior unencrypted data, to restore the crypto state
prior to wire transmission.
Statistics counters have been added to count the amount of TLS data
transmitted in total, and the amount of TLS data which has been dumped
prior to transmission. When non-contiguous TCP sequence numbers are
detected, the software needs to dump the beginning of the current TLS
record up until the point of retransmission. All TLS counters utilize
the counter(9) API.
In order to enable hardware TLS offload the following sysctls must be set:
kern.ipc.mb_use_ext_pgs=1
kern.ipc.tls.ifnet.permitted=1
kern.ipc.tls.enable=1
Sponsored by: Mellanox Technologies
The hardware offload is primarily targeted for TLS v1.2 and v1.3,
using AES 128/256 bit pre-shared keys. This patch adds all the needed
hardware structures, capabilites and firmware commands.
Sponsored by: Mellanox Technologies
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
With the ratification of the Berne Convention in 2000, it became obsolete.
I have removed that phrase and the "(c)" only from files without copyright
claims by other parties. There are 2 files (pci.c, pci_private.h) that are
also claimed by Michael Smith <msmith@freebsd.org> and by BSDi, which have
therefore not been included in this commit.
When all member nations of the Buenos Aires Convention adopted the Berne
Convention, the phrase "All rights reserved" became unnecessary to assert
copyright. Remove it from files under my copyright.
There are 2 files (pci.c, pci_private.h) that) that do also bear msmith's
and BSDi's copyright. I have left them unchanged for now, since I do not
know whether they (or the legal successor in case of BSDi) would agree.
If we boot with hw.ncpu=X (available on arm and arm64 at least) we
shouldn't attach the cpufreq driver as cf_set_method will try to get
the cpuid and it doesn't exists.
This solves cpufreq panicing on RockChip RK3399 when booting with
hw.ncpu=4
MFC after: 1 week
This was purely automatically massaged... some parts are still imperfect,
but this is close enough to make it more readable/easy to work on.
Unfortunately the vt/syscons/kdb situation slightly complicates changes to
tty locking, so some work will need to be done to remediate that.
tightening constraints on busy as a precursor to lockless page lookup and
should largely be a NOP for these cases.
Reviewed by: alc, kib, markj
Differential Revision: https://reviews.freebsd.org/D22611
struct gpio_pin. It turns out these two sets of flags are completely
unrelated to each other.
Also, update the comment for GPIO_ACTIVE_LOW to reflect the fact that it
does get set, somewhat unobviously, by code that parses FDT data. The bits
from the FDT cell containing flags are just copied to gpiobus_pin.flags, so
there's never any obvious reference to the symbol GPIO_ACTIVE_LOW being
stored into the flags field.
FDT bindings document for gpio-i2c devices.
Using the gpio_pin_* functions to acquire/release/manipulate gpio pins
removes the constraint that both gpio pins must belong to the same gpio
controller/bank, and that the gpioiic instance must be a child of gpiobus.
Removing those constraints allows the driver to be fully compatible with
the modern dts bindings for a gpio bitbanged i2c bus.
For hinted attachment, the two gpio pins still must be on the same gpiobus,
and the device instance must be a child of that bus. This preserves
compatibility for existing installations that have use gpioiic(4) with hints.
that they can be used by drivers on non-FDT-configured systems. Only the
functions related to acquiring pins by parsing FDT data remain in
ofw_gpiobus. Also, add two new functions for acquiring gpio pins based on
child device_t and index, or on the bus device_t and pin number. And
finally, defer reserving pins for gpiobus children until they acquire the
pin, rather than reserving them as soon as the child is added (before it's
even known whether the child will attach).
This will allow drivers configured with hints (or any other mechanism) to
use the same code as drivers configured via FDT data. Until now, a hinted
driver and an FDT driver had to be two completely different sets of code,
because hinted drivers could only use gpiobus calls to manipulate pins,
while fdt-configured drivers could not use that API (due to not always being
children of the bus that owns the pins) and had to use the newer
gpio_pin_xxxx() functions. Now drivers can be written in the more
traditional form, where most of the code is shared and only the resource
acquisition code at attachment time changes.
As part of my journey to make it easy to determine what's relying on tty
bits, remove a couple more. Some of these just outright didn't need it,
while others did rely on <sys/tty.h> pollution for mutex headers.
improvements, the ECN bits need to be exposed to the TCP SYNcache.
This change is a minimal modification to the function headers, without any
functional change intended.
Submitted by: Richard Scheffenegger
Reviewed by: rgrimes@, rrs@, tuexen@
Differential Revision: https://reviews.freebsd.org/D22436
in ofw_gpiobus_probe() return BUS_PROBE_DEFAULT rather than 0; we are not
the only possible driver to handle this device, we're just slightly better
than the base gpiobus (which probes at BUS_PROBE_GENERIC).
In the time since this code was first written, the gpio controller bindings
aquired the concept of a "hog" node which could be used to preset one or
more gpio pins as input or output at a specified level. This change doesn't
fully implement the hogging concept, it just filters out hog nodes when
instantiating child devices by scanning for child nodes in the fdt data.
The whole concept of having child nodes under the controller node is not
supported by the standard bindings, and appears to be a freebsd extension,
probably left over from the days when we had no support for cross-tree
phandle references in the fdt data.
I have no good explanation why it happens, but I found that in B2B mode
at least Xeon v4 NTB leaks accesses to its configuration memory at BAR0
originated from the link side to its host side. DMAR predictably blocks
those, making access to remote scratchpad registers in B2B mode impossible.
This change creates identity mapping in DMAR covering the BAR0 addresses,
making the NTB work fine with DMAR enabled. It seems like allowing single
4KB range at 32KB offset may be enough, but I don't see a reason to be so
specific.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This was inherited from iwlwifi, which drives devices supported by both
iwn(4) and iwm(4) in FreeBSD. In iwm(4) _mvm is meaningless, so remove
it. OpenBSD made the same change a long time ago. No functional change
intended.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
should try in order to link up with the peer.
Various FEC variables within the driver can now have multiple bits set
instead of being powers of 2. 0 and -1 in the user knobs still mean no
FEC and auto (driver decides) respectively for backward compatibility,
but no-FEC and auto now have their own bits in the internal
representation. There is a new bit that can be set to request the FEC
recommended by the cable/transceiver module.
Add sysctls to display link related capabilities of the local side as
well as the link partner.
Note that all this needs a new firmware and the documentation for the
driver FEC knobs will be updated after that firmware is added to the
driver.
MFC after: 1 week
Sponsored by: Chelsio Communications
Also, Giant isn't required to busy / unbusy a device, so drop that too while I'm
here. It's not done elsewhere in the tree and in the future will likely be
handled by a node lock to ensure consistency. Leave Giant in place for attach
and removing childing, as that's actually still needed, even if imperfect.
Remove stale comment about contigmalloc taking Giant and calling w/o the lock
held. Neither of these is still true.
Move the locking back into the ioctl handler. This "fixes" the race where we hve
a hot plug event just after the dropping of Giant in pci_find_dbsf, assuming the
driver doesn't then call anything that drops and picks up Giant again... It's a
little safer since don't think it doesn't, but we lack the tools to know for
sure.
When we get a device departed message from the firmware, we send a TARGET_REST
to the device to let the firmware know we're done and as part of the recovery
process. This will abort all the commands. While the documentation says the IOC
is responsible for writing the completion message for all the commands pending
with an aborted status, we sometimes have queued commands for the target that
haven't been completed so are in the INQUEUE state. So, when we later complete
the pending CCB as aborted, these commands are freed and we hit the "state not
busy" panic.
Elsewhere where we dequeue commands, we move the state to BUSY from INQUEUE. Do
that here as well. In talking to Ken, Scott and Justin, they recommended a
series of tests to see if this is 100% safe. Those tests are ongoing, but
preliminary tests suggest this is safe as we see no duplicate completions when
we hit this case at work. We have a machine that has a dodgy powersupply which
usually doesn't apply power to a few drives, but sometimes does when the machine
is under heavy load so we get a rash of the connect / disconnect messages over
half an hour. Without this change, we'd see state not busy panic. With this
change, the drives just annoyingly come and go without affecting the rest of the
machine, but without a complete error injection test suite, it's hard to know if
all edge cases are now covered or not.
Discussed with: scottl, ken, gibbs
This allows the driver to be updated for the next firmware without
waiting for it to be released.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The /dev/pci device doesn't need GIANT, per se. However, one routine
that it calls, pci_find_dbsf implicitly does. It walks a list that can
change when PCI scans a new bus. With hotplug, this means we could
have a race with that scanning. To prevent that, take out Giant around
scanning the list.
However, given that we have places in the tree that drop giant, if
held when we call into them, the whole use of Giant to protect newbus
may be less effective that we desire, so add a comment about why we're
talking it out, and we'll address the issue when we lock newbus with
something other than Giant.
The internal datastructures do not need to be visible outside of
random_harvestq, and this helps ensure they are not misused.
No functional change.
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22485
There's no need to dynamically populate them; the SYSCTL_ macros take care
of load/unload appropriately already (and random_harvestq is 'standard' and
cannot be unloaded anyway).
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22484
Break random_harvestq_prime up into some logical subroutines. The goal
is that it becomes easier to add other early entropy sources.
While here, drop pre-12.0 compatibility logic. loader default configuration
should preload the file as expeced since 12.0.
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22482
On x86 platforms with the intrinsic, rdrand is a deterministic bit generator
(AES-CTR) seeded from an entropic source. On x86 platforms with rdseed, it
is something closer to the upstream entropic source. (There is more nuance;
a block diagram is provided in [1].)
On devices with rdrand and without rdseed, there is no good intrinsic for
acecssing the good entropic soure directly. However, the DRBG is guaranteed
to reseed every 8 kB on these platforms. As a conservative option, on such
hardware we can read an extra 7.99kB samples every time we want a sample
from an independent seed.
As one can imagine, this drastically slows the effective read rate of
RDRAND (a factor of 1024 on amd64 and 2048 on ia32). Microbenchmarks on AMD
Zen (has RDSEED) show an RDRAND rate of 25 MB/s and Intel Haswell (no
RDSEED) show RDRAND of 170 MB/s. This would reduce the read rate on Haswell
to ~170 kB/s (at 100% CPU). random(4)'s harvestq thread periodically
"feeds" from pure sources in amounts of 128-1024 bytes. On Haswell,
enabling this feature increases the CPU time of RDRAND in each "feed" from
approximately 0.7-6 µs to 0.7-6 ms.
Because there is some performance penalty to this more conservative option,
a knob is provided to enable the change. The change does not affect
platforms with RDSEED.
[1]: https://software.intel.com/en-us/articles/intel-digital-random-number-generator-drng-software-implementation-guide#inpage-nav-4-2
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22455
This adds support for ifnet (NIC) KTLS using Chelsio T6 adapters.
Unlike the TOE-based KTLS in r353328, NIC TLS works with non-TOE
connections.
NIC KTLS on T6 is not able to use the normal TSO (LSO) path to segment
the encrypted TLS frames output by the crypto engine. Instead, the
TOE is placed into a special setup to permit "dummy" connections to be
associated with regular sockets using KTLS. This permits using the
TOE to segment the encrypted TLS records. However, this approach does
have some limitations:
1) Regular TOE sockets cannot be used when the TOE is in this special
mode. One can use either TOE and TOE-based KTLS or NIC KTLS, but
not both at the same time.
2) In NIC KTLS mode, the TOE is only able to accept a per-connection
timestamp offset that varies in the upper 4 bits. Put another way,
only connections whose timestamp offset has the 28 lower bits
cleared can use NIC KTLS and generate correct timestamps. The
driver will refuse to enable NIC KTLS on connections with a
timestamp offset with any of the lower 28 bits set. To use NIC
KTLS, users can either disable TCP timestamps by setting the
net.inet.tcp.rfc1323 sysctl to 0, or apply a local patch to the
tcp_new_ts_offset() function to clear the lower 28 bits of the
generated offset.
3) Because the TCP segmentation relies on fields mirrored in a TCB in
the TOE, not all fields in a TCP packet can be sent in the TCP
segments generated from a TLS record. Specifically, for packets
containing TCP options other than timestamps, the driver will
inject an "empty" TCP packet holding the requested options (e.g. a
SACK scoreboard) along with the segments from the TLS record.
These empty TCP packets are counted by the
dev.cc.N.txq.M.kern_tls_options sysctls.
Unlike TOE TLS which is able to buffer encrypted TLS records in
on-card memory to handle retransmits, NIC KTLS must re-encrypt TLS
records for retransmit requests as well as non-retransmit requests
that do not include the start of a TLS record but do include the
trailer. The T6 NIC KTLS code tries to optimize some of the cases for
requests to transmit partial TLS records. In particular it attempts
to minimize sending "waste" bytes that have to be given as input to
the crypto engine but are not needed on the wire to satisfy mbufs sent
from the TCP stack down to the driver.
TCP packets for TLS requests are broken down into the following
classes (with associated counters):
- Mbufs that send an entire TLS record in full do not have any waste
bytes (dev.cc.N.txq.M.kern_tls_full).
- Mbufs that send a short TLS record that ends before the end of the
trailer (dev.cc.N.txq.M.kern_tls_short). For sockets using AES-CBC,
the encryption must always start at the beginning, so if the mbuf
starts at an offset into the TLS record, the offset bytes will be
"waste" bytes. For sockets using AES-GCM, the encryption can start
at the 16 byte block before the starting offset capping the waste at
15 bytes.
- Mbufs that send a partial TLS record that has a non-zero starting
offset but ends at the end of the trailer
(dev.cc.N.txq.M.kern_tls_partial). In order to compute the
authentication hash stored in the trailer, the entire TLS record
must be sent as input to the crypto engine, so the bytes before the
offset are always "waste" bytes.
In addition, other per-txq sysctls are provided:
- dev.cc.N.txq.M.kern_tls_cbc: Count of sockets sent via this txq
using AES-CBC.
- dev.cc.N.txq.M.kern_tls_gcm: Count of sockets sent via this txq
using AES-GCM.
- dev.cc.N.txq.M.kern_tls_fin: Count of empty FIN-only packets sent to
compensate for the TOE engine not being able to set FIN on the last
segment of a TLS record if the TLS record mbuf had FIN set.
- dev.cc.N.txq.M.kern_tls_records: Count of TLS records sent via this
txq including full, short, and partial records.
- dev.cc.N.txq.M.kern_tls_octets: Count of non-waste bytes (TLS header
and payload) sent for TLS record requests.
- dev.cc.N.txq.M.kern_tls_waste: Count of waste bytes sent for TLS
record requests.
To enable NIC KTLS with T6, set the following tunables prior to
loading the cxgbe(4) driver:
hw.cxgbe.config_file=kern_tls
hw.cxgbe.kern_tls=1
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21962
than effectively doing scatter/gather IO with a pair of iic_msgs that direct
the controller to do a single transfer with no bus STOP/START between the
two buffers. It turns out we have multiple i2c hardware drivers that don't
honor the NOSTOP and NOSTART flags; sometimes they just try to do the
transfers anyway, creating confusing failures or leading to corrupted data.
It is clearer to me to return success/error (true/false) instead of some
retry count linked to the inline assembly implementation.
No functional change.
Approved by: core(csprng) => csprng(markm)
Differential Revision: https://reviews.freebsd.org/D22454
A SIM-private field is used for that.
The pointer can be useful when examining a state of a queued ccb.
E.g., a ccb on a da_softc.pending_ccbs.
MFC after: 2 weeks
PLX NTB sends translated DMA requests not only from itsels, but from all
slots and functions of its bus. By default DMAR blocks those additional.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Use the KPI to tweak MSRs in mitigation code.
Reviewed by: markj, scottl
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22431
This CVE has already been announced in FreeBSD SA-19:26.mcu.
Mitigation for TAA involves either turning off TSX or turning on the
VERW mitigation used for MDS. Some CPUs will also be self-mitigating
for TAA and require no software workaround.
Control knobs are:
machdep.mitigations.taa.enable:
0 - no software mitigation is enabled
1 - attempt to disable TSX
2 - use the VERW mitigation
3 - automatically select the mitigation based on processor
features.
machdep.mitigations.taa.state:
inactive - no mitigation is active/enabled
TSX disable - TSX is disabled in the bare metal CPU as well as
- any virtualized CPUs
VERW - VERW instruction clears CPU buffers
not vulnerable - The CPU has identified itself as not being
vulnerable
Nothing in the base FreeBSD system uses TSX. However, the instructions
are straight-forward to add to custom applications and require no kernel
support, so the mitigation is provided for users with untrusted
applications and tenants.
Reviewed by: emaste, imp, kib, scottph
Sponsored by: Intel
Differential Revision: 22374
I've noticed that sometimes with enabled DMAR initial write from device
to this address is somehow getting delayed, triggering assertion due to
zero default being invalid.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
- Deduce allowed address range for bus_dma(9) from the hardware version.
Different versions (CPU generations) have different documented limits.
- Remove difference between address ranges for src/dst and crc. At least
docs for few recent generations of CPUs do not mention anything like that,
while older are already limited with above limits.
- Remove address assertions from arguments. While I do not think the
addresses out of allowed ranges should realistically happen there due to
the platforms physical address limitations, there is now bus_dma(9) to
make sure of that, preferably via IOMMU.
- Since crc now has the same address range as src/dst, remove crc_dmamap,
reusing dst2_dmamap instead.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This driver allows to usage of the paravirt SCSI controller
in VMware products like ESXi. The pvscsi driver provides a
substantial performance improvement in block devices versus
the emulated mpt and mps SCSI/SAS controllers.
Error handling in this driver has not been extensively tested
yet.
Submitted by: vbhakta@vmware.com
Relnotes: yes
Sponsored by: VMware, Panzura
Differential Revision: D18613
ccr(4) and TLS support in cxgbe(4) construct key contexts used by the
crypto engine in the T6. This consolidates some duplicated code for
helper functions used to build key contexts.
Reviewed by: np
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22156
Disable the use of executable 2M page mappings in EPT-format page
tables on affected CPUs. For bhyve virtual machines, this effectively
disables all use of superpage mappings on affected CPUs. The
vm.pmap.allow_2m_x_ept sysctl can be set to override the default and
enable mappings on affected CPUs.
Alternate approaches have been suggested, but at present we do not
believe the complexity is warranted for typical bhyve's use cases.
Reviewed by: alc, emaste, markj, scottl
Security: CVE-2018-12207
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21884
struct nvdimm_label_index is dynamically sized, with the `free`
bitfield expanding to hold `slot_cnt` entries. Fix a few places
where we were treating the struct as though it had a fixed sized.
Reviewed by: cem
Approved by: scottl (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22253
Apply the same user accessible filter to namespaces as is applied
to full-SPA devices. Also, explicitly filter out control region
SPAs which don't expose the nvdimm data area.
Reviewed by: cem
Approved by: scottl (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21987
Previously ntb_transport(4) required at least 6 scratchpad registers,
plus 2 more for each additional memory window. That is too much for some
configurations, where several drivers have to share resources of the same
NTB hardware. This patch introduces new compact version of the protocol,
requiring only 3 scratchpad registers, plus one more for each additional
memory window. The optimization is based on fact that neither of version,
number of windows or number of queue pairs really need more then one byte
each, and window sizes of 4GB are not very useful now. The new protocol
is activated automatically when the configuration is low on scratchpad
registers, or it can be activated explicitly with loader tunable.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Address Lookup Table (A-LUT) being enabled allows to specify separate
translation for each 1/128th or 1/256th of the BAR2. Previously it was
used only to limit effective window size by blocking access through some
of A-LUT elements. This change allows A-LUT elements to also point
different memory locations, providing to upper layers several (up to 128)
independent memory windows. A-LUT hardware allows even more flexible
configurations than this, but NTB KPI have no way to manage that now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This kind of clock nodes represent temporary placeholder for clocks
defined later in boot process. Also, these are necessary to break
circular dependencies occasionally occurring in complex clock graphs.
MFC after: 3 weeks
TVSENSE may not be ready by the time t4_fw_initialize returns and the
firmware returns 0 if the driver asks for the Vdd before the sensor is
ready.
MFC after: 1 week
Sponsored by: Chelsio Communications
This is what iwlwifi seems to do, and the previous behaviour triggered
firmware panics during transmit on a 9560.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Though we don't otherwise use firmware's offload capabilities, we need
to set this flag when the MAC header's size isn't a multiple of four.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Configure the scheduler only for the management queue.
- Fix a bug when enabling the schduler: the queues are specified using a
bitmask.
- Fix style in the area.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is the multiqueue receive code required for 9000-series chips.
Note that we still only configure a single RX queue for now. Multiqueue
support will require MSI-X configuration and a scheme for managing a
global pool of RX buffers.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
For now iwm only ever uses queue 0 and the management queue, but my 9560
raises a software error interrupt during initialization if this flag is
not set. iwlwifi sets it for all 7000- and 8000-series hardware, so we
might as well do it unconditionally.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The firmware for 9000-series and newer devices has a different receive
API which supports multiple queues.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Match such chips using the device ID. We should really be checking the
subdevice as well, since a smaller number of 9460 and 9560 devices
actually belong to a new series of devices and require different
firmware, but that will require some extra logic in iwm_attach().
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Convert existing device family checks to avoid assuming that the device
family is always one of IWM_DEVICE_FAMILY_7000 or _8000.
Submitted by: lwhsu, Guo Wen Jun <blockk2000@gmail.com>
MFC after: 2 weeks
Only perform the call when a qfull bit transitions. While here, avoid
assignments in declarations in iwm_mvm_rx_tx_cmd().
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This ensures that the driver softc reflects device capabilities as early
as possible, for use by device initialization code that is conditional
on certain capabilities.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Also ensure that the htole* macros are applied correctly when specifying
the segment length and upper address bits. No functional change
intended (unless you use iwm(4) on a big-endian machine).
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- amd_intr() does not account for the offset (0x200) in the counter
MSR address and ends up accessing invalid regions while reading
counter value after the 4th counter (0xC001000[8,9,..]) and
erroneously updates the counter values for counters [1-4].
- amd_intr() should only check core pmcs for interrupts since
other types of pmcs (L3,DF) cannot generate interrupts.
- fix pmc NMI's being ignored due to NMI latency on newer AMD processors
Note that this fixes a kernel panic due to GPFs accessing MSRs on
higher core count AMD cpus (seen on both Rome 7502P, and
Threadripper 2990WX 32-core CPUs)
Discussed with: markj
Submitted by: Shreyank Amartya
Differential Revision: https://reviews.freebsd.org/D21553
The Microchip LAN7430 is a PCIe 10/100/1000 Ethernet MAC with integrated
PHY, and the LAN7431 is a MAC with RGMII interface.
To be connected to the build after further testing and review.
Committing now so that changes like r354345 (adding a common
ETHER_IS_ZERO macro) will update this driver too.
Submitted by: Gerald ND Aryeetey <aryeeteygerald_rogers.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20079
The pages stored in the ksyms object are not pageable. Moreover, this
obviates the need to set OBJ_NOSPLIT.
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22229
This function will call the regnode_check_voltage method for a given regulator
and check if the desired voltage in reachable by it.
Also adds a default method that check the std_param and which should be enough
for most regulators and add it as the method for axp* rk805 and fixed regulators.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22260
It is reported that those VFs share their RSS configuration with PF and,
thus, they cannot be configured independently.
Also:
- add missing opt_rss.h to if_ixv.c, otherwise RSS kernel option could
not be seen
- do not enable IXGBE_FEATURE_RSS on the older VFs
- set flowid / hash type to M_HASHTYPE_NONE or M_HASHTYPE_OPAQUE_HASH
(based on what the hardware reports) if IXGBE_FEATURE_RSS is not set
Reviewed by: nobody
MFC after: 4 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D21705
Some places in network code may need to verify that an ethernet address
is not the 'zero' address. Provide a standard macro ETHER_IS_ZERO for
this purpose, similar to the ETHER_IS_BROADCAST macro already available.
This patch also removes previous ETHER_IS_ZERO definitions in several
USB ethernet drivers, in favor of this centrally-located macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21240
A couple of drivers and one place in if.c use ETH_ADDR_LEN, even though
net/ethernet.h provides an equivalent ETHER_ADDR_LEN definition.
Cleanup all of the locations which refer to ETH_ADDR_LEN to use the
standard ETHER_ADDR_LEN instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, jpaetzel@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21239
Handle error bits of INTR_STAT and TX_ABORT registers.
Move interrupt clearing from interrupt handler to polling loop to get
common execution path with polled mode.
Do not clear interrupts with reading of IG4_REG_CLR_INTR register as
interrupts, triggered during the period from reg_read(IG4_REG_INTR_STAT)
to reg_read(IG4_REG_CLR_INTR) will be missed.
Instead, read each IG4_REG_CLR_* register separately.
INTR_STAT register exposes more useful informaton then STA register does
e.g. it exposes error and I2C bus STOP conditions. Make it a main source
of I2C transfer state.
In this mode DATA_CMD register reads and writes are performed in
TX/RX FIFO-sized bursts to increase I2C bus utilization.
That reduces read time from 60us to 30us per byte when read data is fit
in to RX FIFO buffer in FAST speed mode in my setup.
IC clock rates are varied between different controller models so we have
to adjust timing registers in each case individually. Borrow intresting
constants and formulas from Intel specs, i2c-designware and lpss_intel
drivers and apply them to FreeBSD supported controller models.
Implement fetching of timing data via ACPI methods execution if available.
After recent ig4 changes cyapa driver can be attached before timers
initialization is completed. Start polling thread from config_intrhook
to avoid busy loops in that case.
as the driver is fully functional on a cold boot through utilization of
polled mode.
As a side effect, ig4 children probe and attach methods can be called
earlier in the boot sequence, so now it is up to the child drivers
to wait for a kernel initialization completion if it is required.
If controller is allocated with IIC_NOWAIT option ig4 enables polled mode
for a period of allocation that makes possible to start I2C transfers
from the contexts where sleeping is not allowed e.g. from ithreads or
callouts.
Currently ig4 internally depends on it's own interrupts and uses mtx_sleep()
to wait for them. That means it can not be used from any context where
sleeping is disallowed e.g. on cold boot, from DDB/KDB, from other device
driver's interrupt handlers and so on.
This change replaces sleeps with busy loops in cold boot and DDB cases.
Setting the IG4_REG_RX_TL register to 1 was actually generating an
interrupt after 2 bytes were available in the Rx fifo. We need to set the
register to 0 to get an interrupt for 1 byte already.
Obtained from: DragonflyBSD (02f0bf2)
Now io_lock is used as condition variable to synchronize active process with
the interrupt handler. It is not used for tasks other than waiting for
interrupt and passing parameters to and from it's handler.
Specs shows no dedicated interrupt firing on disable of the controller.
Remove io lock acquisitions around set_controller() calls as they are
not needed anymore.
There is no need to read all controller's RX FIFO data to clear RX_FULL
bit in interrupt handler as interrupts are masked permanently since
previous commit.
This avoids possible interrupt storms, depending on the state of the I2C
controller before the driver attached.
During attaching this clears the interrupt mask.
Revert r338215 as this change makes it no-op.
Obtained from: DragonflyBSD (d7c8555)
Fail the attach on controller startup errors. For some reason the
dell xps 13 says there's I2C controller, but the controller appears
to be permanente disabled and will refuse to enable.
Obtained from: DragonflyBSD (509820b)
They share common device driver code with different bus attachments
This commit starts a bunch of changes which have following properties:
Reviewed by: imp (previous version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22016
The valectl(4) program is used to manage vale(4) switches.
Add it to the system commands so that it can be used right away.
This program was previously called vale-ctl, and stored in
tools/tools/netmap
Reviewed by: hrs, bcr, lwhsu, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22146
In this release the netmap support was introduced.
Moreover, it is also now possible to use the LLQ mode of the driver on
the arm64 AWS instances (A1 type).
Differential Revision: https://reviews.freebsd.org/D21938
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
In NETMAP mode not all queues need to be allocated to NETMAP. Some of
them could be left to the kernel. Configuration is managed by the flags
nr_mode and nr_pending_mode provided per each NETMAP kring.
ENA driver checks those flags and perform proper rings initialization.
Differential Revision: https://reviews.freebsd.org/D21937
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Two new tables are added to ena_tx_buffer structure:
* netmap_map_seg stores DMA mapping structures,
* netmap_buf_idx stores buff indexes taken from the slots.
When Tx resources are being set, the new mapping structures are created
and netmap Tx rings are being reset.
When Tx resources are being released, used netmap bufs are unmapped from
DMA and then mapping structures are destroyed.
When Tx interrupt occurrs, ena_netmap_tx_irq is called.
ena_netmap_txsync callback signalizes that there are new packets which
should be transmitted.
First, it fills ena_netmap_ctx. Then it performs two actions:
* ena_netmap_tx_frames moves packets from netmap ring to NIC,
* ena_netmap_tx_cleanup restores buffers from NIC and gives them back
to the userspace app.
0 is returned in case of Tx error that could be handled by the driver.
ena_netmap_tx_frames checks if there are packets ready for transmission.
Then, for each of them, ena_netmap_tx_frame is called. If error occurs,
transmitting is stopped, but if the error was cause due to HW ring being
full, information about that is not propagated to the userspace app.
When all packets are ready, doorbell is written to NIC and netmap ring
state is updated.
Parsing of one packet is done by the ena_netmap_tx_frame function.
First, it checks if number of slots does not exceed NIC limit. Invalid
packets are being dropped and the error is propagated to the upper
layer. As each netmap buffer has equal size, which is typically greater
then 2KiB, there shouldn't be any packets which contain too many slots.
Then, the ena_com_tx_ctx structure is being filled. As netmap does not
support any hardware offloads, ena_com_tx_meta structure is set to zero.
After that, ena_netmap_map_slots maps all memory slots for DMA.
If the device works in the LLQ mode, the push header is being determined
by checking if the header fits within the first socket.
If so, the portion of data is being copied directly from the slot.
In other case, the data is copied to the intermediate buffer.
First slots are treated the same as as the others, because DMA mapping
has no impact on LLQ mode. Index of each netmap buffer is taken from
slot and stored in netmap_buf_idx array. In case of mapping error,
memory is unmapped and packets are put back to the netmap ring.
ena_netmap_tx_cleanup performs out of order cleanup of sent buffers.
First, req_id is taken and is validated. As validate_tx_req_id from
ena.c is specific to kernels mbuf, another implementation is provided.
Each req_id is cleaned up by ena_netmap_tx_clean_one function. Buffers
are being unmaped from DMA and put back to netmap ring. In the end,
state of netmap and NIC rings are being updated.
Differential Revision: https://reviews.freebsd.org/D21936
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Most of code used for Rx ring initialization could be reused in NETMAP.
Reset of NETMAP ring and new alloc method was added. Driver decides if
use kernels mbufs or NETMAPs slots based on IFCAP_NETMAP flag. It
allows to reuse ena_refill_rx_bufs, which provides proper handling of
Rx out of order completion.
ena_netmap_alloc_rx_slot takes exactly the same arguments as
ena_alloc_rx_mbuf, but instead of allocating one mbuf it takes one slot
from NETMAP ring. Based on queue id proper netmap_ring is found. As
NETMAP provides the "partial opening" feature not all of the rings are
avaiable. Not used points to invalid ring. If there is available slot,
it is taken from the ring. Its buffer is mapped to DMA and its index is
stored in ena_rx_buffer field in ena_rx_buffer structure. Then ena_buf
is filled with addresses and ring state is updated.
Cleanup is handled by ena_netmap_free_rx_slot. It unmaps DMA and returns
buffer to ring. As we could not return more bufs than we have taken and
we should not override occupied slots, buf_index should be 0. It is
being checked by assertion.
ena_netmap_rxsync callback puts received packets back to NETMAP ring and
passes them to user space by updating ring pointers. First it fills
ena_netmap_ctx.
Then it performs two actions:
* ena_netmap_rx_frames moves received frames from NIC to NETMAP ring,
* ena_netmap_rx_cleanup fills NIC ring with slots released by userspace
app.
In case of Rx error that could be handled by NIC driver (for example by
performing reset) rx sync should return 0.
ena_netmap_rx_frames first checks if NETMAP ring is in consistent
state and then in the loop receives new frames. When all available
frames are taken nr_hwtail is updated.
Receiving one frame is handled by ena_netmap_rx_frame. If no error
occurrs, each Descriptor is loaded by ena_netmap_rx_load_desc function.
If packets take more than one segments NS_MOREFRAG flag must be set in
all, but not last slot. In case of wrong req_id packet is removed from
NETMAP ring. If packet is successful received counters are updated.
Refiling of NIC ring is performed by ena_netmap_rx_cleanup function.
It calculates number of available slots and call ena_refill_rx_bufs with
proper number.
Differential Revision: https://reviews.freebsd.org/D21935
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Mock implementation of NETMAP routines is located in ena_netmap.c/.h
files. All code is protected under the DEV_NETMAP macro. Makefile was
updated with files and flag.
As ENA driver provide own implementations of (un)likely it must be
undefined before including NETMAP headers.
ena_netmap_attach function is called on the end of NIC attach. It fills
structure with NIC configuration and callbacks. Then provides it to
netmap_attach. Similarly netmap_detach is called during ena_detach.
Three callbacks are used.
nm_register is implemented by ena_netmap_reg. It is called when user
space application open or close NIC in NETMAP mode. Current action is
recognized based on onoff parameter: true means on and false off. As
NICs rings need to be reconfigured ena_down and ena_up are reused.
When user space application wants to receive new packets from NIC
nm_rxsync is called, and when there are new packets ready for Tx
nm_txsync is called.
Differential Revision: https://reviews.freebsd.org/D21934
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Move Rx/Tx routines to separate file.
Some functions:
* ena_restore_device,
* ena_destroy_device,
* ena_up,
* ena_down,
* ena_refill_rx_bufs
could be reused in upcoming netmap code in the driver. To make it
possible, they were moved to ena.h header.
Differential Revision: https://reviews.freebsd.org/D21933
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
When the ENA_FLAG_DEVICE_RUNNING flag is disabled, the AENQ handlers
aren't executed. To fix that, the watchdog timestamp should be updated
just before enabling the watchdog.
Timer service was always being enabled, even if the device wasn't up
before the reset. That shouldn't happen, as the timer service is being
executed only for working interface.
Differential Revision: https://reviews.freebsd.org/D21932
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the pmamp_change_attr() is public on arm64 since r351131, it can be
used on the arm64 to map memory range as with the write combined
attribute.
It requires the driver to use generic VM_MEMATTR_WRITE_COMBINING flag
instead of the x86 specific PAT_WRITE_COMBINING.
Differential Revision: https://reviews.freebsd.org/D21931
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
First, SCL low timeout is set to 25 milliseconds by default as opposed
to 1 millisecond before. The new value is based on the SMBus
specification. The timeout can be changed on a per bus basis using
dev.iicbb.N.scl_low_timeout sysctl.
The driver uses DELAY to wait for high SCL up to 1 millisecond, then it
switches to pause_sbt(SBT_1MS) for the rest of the timeout.
While here I made a number of other changes. 'udelay' that's used for
timing clock and data signals is now calculated based on the requested
bus frequency (dev.iicbus.N.frequency) instead of being hardcoded to 10
microseconds. The calculations are done in such a fashion that the
default bus frequency of 100000 is converted to udelay of 10 us. This
is for backward compatibility. The actual frequency will be less than a
quarter (I think) of the requested frequency.
Also, I added detection of stuck low SCL in a few places. Previously,
the code would just carry on after the SCL low timeout and that might
potentially lead to misinterpreted bits.
Finally, I fixed several style issues near the code that I changed.
Many more are still remaining.
Tested by accessing HTU21 temperature and humidity sensor in this setup:
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
gpio1: <Nuvoton GPIO controller> at GPIO ldn 0x07 on superio0
pcib0: allocated type 4 (0x220-0x226) for rid 0 of gpio1
gpiobus1: <GPIO bus> on gpio1
gpioiic0: <GPIO I2C bit-banging driver> at pins 14-15 on gpiobus1
gpioiic0: SCL pin: 14, SDA pin: 15
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C generic I/O> on iicbus0
Discussed with: ian, imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22109
I limited potentially infinite timings by 960 us based on a footnote on
page 38 of Maxim Integrated Application Note 937, Book of iButton
Standards: "In order not to mask interrupt signalling by other devices
on the 1–Wire bus, tRSTL + tR should always be less than 960 us."
MFC after: 3 weeks
Previously we used the minimal value of 1 us and it was really tight.
Application Note 3829 has a table describing recommended t_rec values
for various bus voltages, temperature conditions and numbers of slave
devices. The new value decreases the maximum possible data rate from
16.3 Kbit/s to 13.3 Kbit/s, but it allows for up to four slaves on a
3.3V bus (under room temperature).
References:
- Maxim Integrated Application Note 3829
Determining the Recovery Time for Multiple-Slave 1-Wire(R) Networks
- Maxim Integrated Application Note 937
Book of iButton Standards
Discussed with: imp (D22108)
MFC after: 3 weeks
After r353292, netmap generic adapter on if_vlan interfaces panics on
asserting the NET_EPOCH. In more detail, this happens when
nm_os_generic_xmit_frame() is called, that is in the generic txsync
routine.
Fix the issue by entering the NET_EPOCH during the generic txsync.
We amortize the cost of entering/exiting over a whole batch of
transmissions.
PR: 241489
Reported by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
Previously the code used sbttous() before microseconds comparison in one
place, sbttons() and nanoseconds in another, division by SBT_1US and
microseconds in yet another.
Now the code consistently uses multiplication by SBT_1US to convert
microseconds to sbintime_t before comparing them with periods between
calls to sbinuptime(). This is fast, this is precise enough (below
0.03%) and the periods defined by the protocol cannot overflow.
Reviewed by: imp (D22108)
MFC after: 2 weeks
The lock is used only for start / stop signaling.
It is used only for 'flags' field and the related condition variable.
This change is a follow-up to r354067, it was suggested by Warner in
D22107.
Suggested by: imp
MFC after: 1 week
This is similar to what is done around other calls that lead to
own_command_wait() that can sleep.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22107
Some controllers cannot preset future output value while the pin is in
input mode. This adds a fallback for those controllers. The new code
assumes that a controller reports an error in that case.
For example, all hardware supported by nctgpio behaves in that way.
This is a temporary measure. In the future we will use
GPIO_PIN_PRESET_LOW / GPIO_PIN_PRESET_HIGH to preset the output either
in hardware, if supported, or in software (e.g., in
gpiobus_pin_setflags).
While here, I extracted common functionality of gpioiic_set{sda,scl} and
gpioiic_get{sda,scl} to gpioiic_setpin and gpioiic_getpin respectively.
MFC after: 2 weeks
The object does not provide anonymous memory.
Reported by: kib
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22123
This method check that boot_on or always_on is set to 1 and if it
is it will try to enable the regulator.
The binding docs aren't clear on what to do but Linux enable the regulator
if any of those properties is set so we want to do the same.
The function first check the status to see if the regulator is
already enabled it then get the voltage to check if it is in a acceptable
range and then enables it.
This will be either called from the regnode_init method (if it's needed by the platform)
or by a SYSINIT at SI_SUB_LAST
Reviewed by: mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22106
NIC KTLS will add a new TLS send tag type in cxgbe(4) that is a
distinct tag from a ratelimit tag. To support this, refactor
cxgbe_snd_tag to be a simple send tag with a type and convert the
existing ratelimit tag to a new cxgbe_rate_tag structure.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22072
Previously the table was allocated on first use by TOE and the
ratelimit code. The forthcoming NIC KTLS code also uses this table.
Allocate it unconditionally during attach to simplify consumers.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D22028
This change consists of two parts.
First, nctgpio now supports hardware access via an I/O port window if
it's configured by firmware. For instance, PC Engines firmware
v4.10.0.2 does that. This is faster than going through the Super I/O
configuration registers.
Second, nctgpio now caches values of bits that it controls. For
example, the driver does not need to access the hardware to determine if
a pin is an output or an input, or a state of an output. Also, the
driver makes use of the fact that the hardware preserves an output state
of a pin accross a switch to the input mode and back.
With this change I am able to use the 1-Wire bus over nctgpio whereas
previously the driver introduced too much latency to be compliant with
the relatively strict protocol timings.
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
gpio1: <Nuvoton GPIO controller> at GPIO ldn 0x07 on superio0
pcib0: allocated type 4 (0x220-0x226) for rid 0 of gpio1
gpiobus1: <GPIO bus> on gpio1
owc0: <GPIO attached one-wire bus> at pin 4 on gpiobus1
ow0: <1 Wire Bus> on owc0
ow0: romid 28:b2:9e:45:92:10:02:34: no driver
ow_temp0: <Advanced One Wire Temperature> romid 28:b2:9e:45:92:10:02:34 on ow0
MFC after: 4 weeks
This driver seems to have a bug. The bug was carefully saved during
conversion. In the al_eth_mac_table_unicast_add() the argument 'addr',
which is the actual address is unused. So, the function is called as
many times as we have addresses, but with the exactly same argument
list. This doesn't make any sense, but was preserved.
- In em_msix_link(), properly handle IGB-class devices after the iflib(4)
conversion again by only setting EM_MSIX_LINK for the EM-class 82574
and by re-arming link interrupts unconditionally, i. e. not only in
case of spurious interrupts. This fixes the interface link state change
detection for the IGB-class. [1]
- In em_if_update_admin_status(), only re-arm the link state change
interrupt for 82574 and also only if such a device uses MSI-X, i. e.
takes advantage of autoclearing. In case of INTx and MSI as well as
for LEM- and IGB-class devices, re-arming isn't appropriate here and
setting EM_MSIX_LINK isn't either.
While at it, consistently take advantage of the hw variable.
PR: 236724 [1]
Differential Revision: https://reviews.freebsd.org/D21924
This patch is part of an effort to make bhyve networking (in particular TCP)
faster. The key strategy to enhance TCP throughput is to let the whole packet
datapath work with TSO/LRO packets (up to 64KB each), so that the per-packet
overhead is amortized over a large number of bytes.
This capability is supported in the guest by means of the vtnet(4) driver,
which is able to handle TSO/LRO packets leveraging the virtio-net header
(see struct virtio_net_hdr and struct virtio_net_hdr_mrg_rxbuf).
A bhyve VM exchanges packets with the host through a network backend,
which can be vale(4) or if_tap(4).
While vale(4) supports TSO/LRO packets, if_tap(4) does not.
This patch extends if_tap(4) with the ability to understand the virtio-net
header, so that a tapX interface can process TSO/LRO packets.
A couple of ioctl commands have been added to configure and probe the
virtio-net header. Once the virtio-net header is set, the tapX interface
acquires all the IFCAP capabilities necessary for TSO/LRO.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D21263
They're formatted into the device name like unit numbers, anyway; store the
number in mda_unit => si_drv0 like dev2unit() expects.
No functional change intended.
Sponsored by: Dell EMC Isilon
The sentinel value for "use the rest of the region," -1, isn't zero modulo
PAGE_SIZE. Relax the check to permit the intended special value.
X-MFC-With: r353110
Sponsored by: Dell EMC Isilon
Follow-up to incomplete pedantic change in r353691 by actually fixing the
default implementation to match the interface type. Mea culpa.
X-MFC-With: r353691, r339754
After r339754, the additional interface parameter was accidentally left out
of the default acpi_generic_id_probe implementation. Apparently this does
not cause any real problems, so this fix is mostly stylistic.
No functional change intended.
X-MFC-With: r339754
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
r259680 added support to vt(4) for printing double-width characters.
Remove the comment that claims no support.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This change applies some suggestions by delphij from D21979.
A write-only variable is removed.
There is a diagnostic message if the driver does not recognize the chip.
A chained if-statement is converted to a switch.
MFC after: 3 weeks
From Jake:
When updating the device statistics, report whether or not we have
received any pause frames to the iflib stack. This allows the iflib
stack to avoid generating a Tx hang message while the device is paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21870
From Jake:
Notify the iflib stack of whether we received any pause frames during
the timer window. This allows the stack to avoid reporting a Tx hang due
to the device being paused.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21869
From Jake:
The e1000 driver sets the iflib shared context isc_pause_frames value to
the number of received xoff frames. This is done so that the iflib
watchdog timer won't trigger a Tx Hang due to pause frames.
Unfortunately, the function simply sets it to the value of the xoffrxc
counter. Once the device has received a single XOFF packet, the driver
always reports that we received pause frames. This will prevent the Tx
hang detection entirely from that point on.
Fix this by assigning isc_pause_frames to a non-zero value if we
received any XOFF packets in the last timer interval.
We could attempt to calculate the total number of received packets by
doing a subtraction, but the iflib stack only seems to check if
isc_pause_frames is non-zero.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: gallatin@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21868
the slot is flagged as 'embedded'.
The features related to embedded and shared slots were added in v3.0 of
the sdhci spec. Hardware prior to v3 sometimes supported 1.8v on non-
removable devices in embedded systems, but had no way to indicate that
via the standard sdhci registers (instead they use out of band metadata
such as FDT data).
This change adds the controller specification version to the check for
whether to filter out the 1.8v selection. On older hardware, the 1.8v
option is allowed to remain. On 3.0 or later it still requires the
embedded-slot flag to remain.
This is part of the fix for PR 241301 (eMMC not detected on Beaglebone).
Changes to the sdhci_ti driver are also needed for a full fix.
PR: 241301
This allows to remove a bunch of low level code.
Also, superio(4) provides safer interaction with other drivers
that work with Super I/O configuration registers.
Tested only on PCengines APU2:
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
wbwd0: <Nuvoton NCT6102 (0xc4/0x53) Watchdog Timer> at WDT ldn 0x08 on superio0
The watchdog output is incorrectly wired on that system and the watchdog
does not really do it its job, but the pulse can be seen with a signal
analyzer.
Reviewed by: delphij, bcr (man page)
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21979
This is where it logically belongs.
The change allows to drop a bunch of low lewel code.
Reviewed by: gonzo
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21980
From Zach:
Intel documentation indicates that backplane X550EM_X KR devices do not
support Energy Efficient Ethernet. Prior to this patch, X552 devices
(device ID 0x15AB) will crash the system when transitioning EEE state
via sysctl.
Signed-off-by: Zach Vargas <zvargas@xes-inc.com>
PR: 240320
Submitted by: Zach Vargas <zvargas@xes-inc.com>
Reviewed by: erj@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21673
Rescan a PCI bus when the ACPI_NOTIFY_BUS_CHECK event is posted to a
PCI bus.
Reviewed by: scottl
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21948
Install ACPI notify handlers on PCI devices with an _EJ0 method. This
handler is invoked when devices are added or removed.
- When an ACPI_NOTIFY_DEVICE_CHECK event posts, rescan the parent bus
device. Note that strictly speaking we only need to rescan the
specified device, but BUS_RESCAN is what is available, so we rescan
the entire bus.
- When an ACPI_NOTIFY_EJECT_REQUEST event posts, detach the device
associated with the ACPI handle, invoke the _EJ0 method, and then
delete the device.
Eventually this might be changed to vector notify events to devd in
userspace where devctl can be used instead to permit more complex
actions such as graceful unmounting of filesystems.
Tested by: cperciva
Reviewed by: cperciva, imp, scottl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21948
Ignore only ENOENT (no DTS properties found) and ENODEV (driver not
present) non-zero return values from ext_resources.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22043
Atomics are used for page busy and valid state when the shared busy is
held. The details of the locking protocol and valid and dirty
synchronization are in the updated vm_page.h comments.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21594
This is the first in a series of patches that promotes the page busy field
to a first class lock that no longer requires the object lock for
consistency.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21548
(resets, regulators, clocks) are not available.
Rely on a system initialization done by a bootloader in that cases.
This fixes operation on Terasic DE10-Pro (an Intel Stratix 10
development kit).
Sponsored by: DARPA, AFRL
Refactor nvdimm_spa_memattr() routine and callers to just save the value at
initialization and use the value directly. The reference value from NFIT,
MemoryMapping, is read only once, so the associated memattr could never
change.
No functional change.
Sponsored by: Dell EMC Isilon
starting at the max. domain, and then work down. Then existing FreeBSD
drivers will attach. Interrupt routing from the VMD MSI-X to the NVME
drive is not well known, so any interrupt is sent to all children that
register.
VROC used Intel meta data so graid(8) works with it. However, graid(8)
supports RAID 0,1,10 for read and write. I have some early code to
support writes with RAID 5. Note that RAID 5 can have life issues
with SSDs since it can cause write amplification from updating the parity
data.
Hot plug support needs a change to skip the following check to work:
if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) {
in sys/dev/pci/pci_pci.c.
Looked at by: imp, rpokala, bcr
Differential Revision: https://reviews.freebsd.org/D21383
This ensures the clip task won't race with t4_destroy_clip_table.
While here, make some mutex destroys unconditional since attach always
initializes them.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21952
If the bootloader enabled DMA we need to fully reset the DMA controller
otherwise we might have some stale data in it that provoke weird
behavior.
MFC after: 1 week
This adds a TOE hook to allocate a KTLS session. It also recognizes
TLS mbufs in the socket buffer and sends those to the NIC using a TLS
work request to encrypt the record before segmenting it.
TOE TLS support must be enabled via the dev.t6nex.<N>.tls sysctl in
addition to enabling KTLS.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
The PCI block in the adapter requires this field to be set to a valid
queue ID. It is not clear why it did not fail on all machines, but
the effect was that crypto operations reading input data via DMA
failed with an internal PCI read error on machines with 128G or more
of RAM.
Reported by: gallatin
Reviewed by: np
MFC after: 3 days
Sponsored by: Chelsio Communications
As noted by the commit message, callouts are now persistant
and should not be in the auto-zero section of the RQ's and SQ's.
This fixes an assert when using the TX completion event
factor feature with mlx5en(4).
Found by: gallatin@
MFC after: 3 days
Sponsored by: Mellanox Technologies
In case the implementation ever changes from using a chain of next pointers,
then changing the macro definition will be necessary, but changing all the
files that iterate over vm_map entries will not.
Drop a counter in vm_object.c that would have an effect only if the
vm_map entry count was wrong.
Discussed with: alc
Reviewed by: markj
Tested by: pho (earlier version)
Differential Revision: https://reviews.freebsd.org/D21882
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
nvdimm_e820 is a newbus pseudo driver that looks for "legacy" e820 PRAM
spans and creates ordinary-looking SPA devfs nodes for them
(/dev/nvdimm_spaN).
As these legacy regions lack real NFIT SPA regions and namespace
definitions, they must be administratively sliced up externally using
device.hints. This is similar in purpose to the Linux memmap= mechanism.
It is assumed that systems with working NFIT tables will not have any use
for this driver, and that that will be the prevailing style going forward,
so if there are no explicit hints provided, this driver does not
automatically create any devices.
Reviewed by: kib (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21885
Create an attachment file for the existing ACPI attachment, and create a
new FDT attachment for the generic-ehci driver.
Submitted by: andrew (Original version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19389
Regression introduced in r343629 when malloc result was renamed from spa to
spa_mapping and the 'spa' name was instead used to iterate a table, but the
free() target was not updated.
Reviewed by: kib, scottph
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21871
The PRM suggests random 0 - 10ms to prevent multiple waiters on the same
interval in order to avoid starvation.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Before attempting to initialize the command interface we must wait till
the fw_initializing bit is clear.
If we fail to meet this condition the hardware will drop our
configuration, specifically the descriptors page address. This scenario
can happen when the firmware is still executing an FLR flow and did not
finish yet so the driver needs to wait for that to finish.
Linux commits:
6c780a0267b8
b8a92577f4be.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in mlx5en(4) after r348254.
The unlimited send tags are shared amount multiple connections and are
not allocated per send tag allocation request. Only increment the refcount.
MFC after: 3 days
Sponsored by: Mellanox Technologies
It may happen during link down that the running state may be observed
non-zero in the transmit routine, right before the running state is
cleared. This may end up using a destroyed mutex.
Make all channel mutexes and callouts persistant.
Preserve receive and send queue statistics during link toggle.
MFC after: 3 days
Sponsored by: Mellanox Technologies
in mlx5core. The EEPROM information is not only a property of the
mlx5en(4) driver.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
The following sysctls are added:
dev.mce.N.conf.qos.cable_length
dev.mce.N.conf.qos.buffers_size
dev.mce.N.conf.qos.buffers_prio
Submitted by: kib@
MFC after: 3 days
Sponsored by: Mellanox Technologies
All prints in mlx5core should use on of the macros:
mlx5_core_err/dbg/warn
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
In case of health counter fails to increment it indicates a bad device health.
In case when the syndrome indicated by firmware is 0x0, this indicates that
firmware is unable to respond to initialization segment reads.
Add proper print in this case.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
MPFS is a logical switch in the Mellanox device which forward packets
based on a hardware driven L2 address table, to one or more physical-
or virtual- functions. The physical- or virtual- function is required
to tell the MPFS by using the MPFS firmware commands, which unicast
MAC addresses it is requesting from the physical port's traffic.
Broadcast and multicast traffic however, is copied to all listening
physical- and virtual- functions and does not need a rule in the MPFS
switching table.
Linux commit: eeb66cdb682678bfd1f02a4547e3649b38ffea7e
MFC after: 3 days
Sponsored by: Mellanox Technologies
Add the 512 bytes limit of RDMA READ and the size of remote address to the max
SGE calculation.
Submitted by: slavash@
Linux commit: 288c01b746aa
MFC after: 3 days
Sponsored by: Mellanox Technologies
Currently only suspend requests are acknowledged by writing an empty
string back to the xenstore control node, but poweroff or reboot
requests are not acknowledged and FreeBSD simply proceeds to perform
the desired action.
Fix this by acknowledging all requests, and remove the suspend specific
ack done in the handler.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
As of r347221 the iflib legacy interrupt mode setup assumes that drivers
perform both receive and transmit processing from the interrupt handler.
This assumption is invalid in the vmxnet3 driver, so introduce the
IFLIB_SINGLE_IRQ_RX_ONLY flag to make iflib avoid tx processing in the
interrupt handler.
PR: 239118
Reported and tested by: Juraj Lutter <otis@sk.freebsd.org>
Obtained from: marius
Reviewed by: gallatin
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21831
r347183 bumped GEOM classes to SI_ORDER_SECOND to resolve a race between
them and the initialization of devsoftc.mtx in devinit, but missed this
dependency on g_flashmap that may now lose the race against GEOM
classes/g_init.
There's a great comment that describes the situation that has also been
updated with the new ordering of GEOM classes.
Reported by: bdragon
MFC after: 4 days
On rockchip board it seems that the value in the DTS
are not enough for reseting the chip, I don't know if
the value are really incorrect or if DELAY is not precise
enough or if the rockchip gpio driver have some "lag" of some
kind or not.
For now just add more delay.
No functional change intended.
The intent is to add a "legacy" e820 pmem newbus bus for nvdimm device in a
subsequent revision, and it's a little more clear if the parent buses get
independent source files.
Quite a lot of ACPI-specific logic is left in nvdimm.c; disentangling that
is a much larger change (and probably not especially useful).
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21813
Those functions are used by kernel, and we can't check all possible argument
errors in production kernel. Plus according to docs many of those errors
are checked by hardware. Assertions should just help with code debugging.
MFC after: 2 weeks
The TUNABLE_INT_FETCH is macro around getenv_int() and we will get
return value 0 or 1 for failure or success, we can use it to decide
which background color to use.
Convert all remaining references to that field to "ref_count" and update
comments accordingly. No functional change intended.
Reviewed by: alc, kib
Sponsored by: Intel, Netflix
Differential Revision: https://reviews.freebsd.org/D21768
Instead of predicting the MSI-X bar index based on the device's MAC
type, read it from the device's PCI configuration instead.
PR: 239704
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21547
- For each queue pair precalculate CPU and domain it is bound to.
If queue pairs are not per-CPU, then use the domain of the device.
- Allocate most of queue pair memory from the domain it is bound to.
- Bind callouts to the same CPUs as queue pair to avoid migrations.
- Do not assign queue pairs to each SMT thread. It just wasted
resources and increased lock congestions.
- Remove fixed multiplier of CPUs per queue pair, spread them even.
This allows to use more queue pairs in some hardware configurations.
- If queue pair serves multiple CPUs, bind different NVMe devices to
different CPUs.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
above 1Kbyte. It might look like some XHCI(4) controllers do not
support when the USB control transfer is split using a link TRB. The
next NORMAL TRB after the link TRB is simply failing with XHCI error
code 4. The quirk ensures we allocate a 64Kbyte buffer so that the
data stage TRB is not broken with a link TRB.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
libusb. This is useful for speeding up large data transfers while reducing
the interrupt rate.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
Allocate ioat->ring memory from the device domain.
Schedule ioat->poll_timer to the first CPU of the device domain.
According to pcm-numa tool from intel-pcm port, this reduces number of
remote DRAM accesses while copying data by 75%. And unless it is a noise,
I've noticed some speed improvement when copying data to other domain.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
If there is an attempt to switch from a process-owned VT to a closed VT,
then vt(4) first requests the process to release its VT and only then
realizes that the target VT is closed and, so, the switch is not
possible. So, the driver does not actually do any switch, but at the
same time the owning process is not notified about that and it does not
re-acquire the VT.
This change adds an early check for the target VT state, so that the
switch can be refused before the process coordination dance.
On top of that, the code now checks for a failure of vt_window_switch()
and calls vt_window_postswitch() for the current VT if it is in the
process mode.
Test Plan:
- configure VT1 - VT8 (ttyv0 - ttyv7) to be text consoles (run getty)
- configure VT9 (ttyv8) to rn X server
- make sure that the X server configuration allows VT switching
- leave VT10 - VT12 unconfigured
- while in the X server press Ctrl+Alt+F10
- without the patch, observe strange screen content and problems with
keyboard input
- with the patch, observe that nothing happens
The problem has been observed and the fix has been tested with an nVidia
graphics card and the proprietary nvidia driver.
Not sure if that matters.
Reviewed by: ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21704
BERI stands for Bluespec Extensible RISC Implementation, based on MIPS.
BERI has not implemented standard MIPS perfomance monitoring counters,
instead it provides statistical counters.
BERI statcounters have a several limitations:
- They can't be written
- They don't support start/stop operation
- None of hardware interrupt is provided on a counter overflow.
So make it separate to hwpmc_mips module and support process/system
counting mode only.
Sponsored by: DARPA, AFRL
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
Since TX interrupt is generated when THRE is set, wait for TEMT set means
wait for full character transmission time. At low speeds that may take
awhile, burning CPU time while holding sc_hwmtx lock, also congested.
This is partial revert of r317659.
PR: 240121
MFC after: 2 weeks
Errors are communicated between the i2c controller layer and upper layers
(iicbus and slave device drivers) using a set of IIC_Exxxxxx constants which
effectively define a private number space separate from (and having values
that conflict with) the system errno number space. Sometimes it is necessary
to report a plain old system error (especially EINTR) from the controller or
bus layer and have that value make it back across the syscall interface
intact.
I initially considered replicating a few "crucial" errno values with similar
names and new numbers, e.g., IIC_EINTR, IIC_ERESTART, etc. It seemed like
that had the potential to grow over time until many of the errno names were
duplicated into the IIC_Exxxxx space.
So instead, this defines a mechanism to "encode" an errno into the IIC_Exxxx
space by setting the high bit and putting the errno into the lower-order
bits; a new errno2iic() function does this. The existing iic2errno()
recognizes the encoded values and extracts the original errno out of the
encoded value. An interesting wrinkle occurs with the pseudo-error values
such as ERESTART -- they aleady have the high bit set, and turning it off
would be the wrong thing to do. Instead, iic2errno() recognizes that lots of
high bits are on (i.e., it's a negative number near to zero) and just
returns that value as-is.
Thus, existing drivers continue to work without needing any changes, and
there is now a way to return errno values from the lower layers. The first
use of that is in iicbus_poll() which does mtx_sleep() with the PCATCH flag,
and needs to return the errno from that up the call chain.
Differential Revision: https://reviews.freebsd.org/D20975
PSCI code to use it.
This interface will also be used by Intel Stratix 10 platform.
This was not tested on arm due to lack of PSCI-enabled arm hardware
lying around.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21439
Execution of "Soft reset" command (IG4_REG_RESETS_SKL) at controller init
stage sets SDA_HOLD register value to 0x0001 which is often too low for
normal operation.
Set SDA_HOLD back to 28 after reset to restore controller functionality.
PR: 240339
Reported by: imp, GregV, et al.
MFC after: 3 days
- VM_ALLOC_NOCREAT will grab without creating a page.
- vm_page_grab_valid() will grab and page in if necessary.
- vm_page_busy_acquire() automates some busy acquire loops.
Discussed with: alc, kib, markj
Tested by: pho (part of larger branch)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21546
races with page busy state. The object lock is still used as an interlock
to ensure that the identity stays valid. Most callers should use
vm_page_sleep_if_busy() to handle the locking particulars.
Reviewed by: alc, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21255
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
this to 2k to prevent them from being truncated and ignored. It
appears to be a sanity check only, but bumping it to 2k allows both of
my iic hid devices to be parsed and the second one to work...
The iicdev_writeto() function basically does scatter-gather IO by filling
in a pair of iic_msg structs to write the register address then the data
from different locations but with a single bus START/xfer/STOP sequence.
It turns out several low-level i2c controller drivers do not honor the
IIC_NOSTART flag, so the second piece of the write gets a new START on
the bus, and that confuses the ads111x chips which expect a continuous
write of 3 bytes to set a register.
A proper fix for this is to track down all the misbehaving controllers
drivers and fix them. For now this change makes this driver work again.
Also, disable the comparator by default; it's not used for anything.
The previous logic would start a measurement, and then pause_sbt() for the
averaging time currently configured in the chip. After waiting that long,
the code would blindly read the measurement register and return its value.
The problem is that the chip's idea of averaging time is based on its
internal free-running 1MHz oscillator, which may be running at a wildly
different rate than the kernel clock. If the chip's internal timer was
running slower than the kernel clock, we'd end up grabbing a stale result
from an old measurement.
The driver now still uses pause_sbt() to yield the cpu while waiting for
the measurement to complete, but after sleeping it checks the chip's status
register to ensure the measurement engine is idle. If it's not, the driver
uses a retry loop to wait a bit (5% of the original wait time) then check
again for completion.
The NVMe standard (1.4) states
>>> 8.6 Doorbell Stride for Software Emulation
>>> The doorbell stride,...is useful in software emulation of an NVM
>>> Express controller. ... For hardware implementations of the NVM
>>> Express interface, the expected doorbell stride value is 0h.
However, hardware in the wild exists with a doorbell stride of 1
(meaning 8 byte separation). This change supports that hardware, as
well as software emulators as envisioned in Section 8.6. Since this is
the fast path, care has been taken to make this computation
efficient. The bit of math to compute an offset for each is replaced
by a memory load from cache of a pre-computed value.
MFC After: 3 days
Reviewed by: scottl@
Differential Revision: https://reviews.freebsd.org/D21514
When we suspend, we need to properly shutdown the NVME controller. The
controller may go into D3 state (or may have the power removed), and
to properly flush the metadata to non-volatile RAM, we must complete a
normal shutdown. This consists of deleting the I/O queues and setting
the shutodown bit. We have to do some extra stuff to make sure we
reset the software state of the queues as well.
On resume, we have to reset the card twice, for reasons described in
the attach funcion. Once we've done that, we can restart the card. If
any of this fails, we'll fail the NVMe card, just like we do when a
reset fails.
Set is_resetting for the duration of the suspend / resume. This keeps
the reset taskqueue from running a concurrent reset, and also is
needed to prevent any hw completions from queueing more I/O to the
card. Pass resetting flag to nvme_ctrlr_start. It doesn't need to get
that from the global state of the ctrlr. Wait for any pending reset to
finish. All queued I/O will get sent to the hardware as part of
nvme_ctrlr_start(), though the upper layers shouldn't send any
down. Disabling the qpairs is the other failsafe to ensure all I/O is
queued.
Rename nvme_ctrlr_destory_qpairs to nvme_ctrlr_delete_qpairs to avoid
confusion with all the other destroy functions. It just removes the
queues in hardware, while the other _destroy_ functions tear down
driver data structures.
Split parts of the hardware reset function up so that I can
do part of the reset in suspsend. Split out the software disabling
of the qpairs into nvme_ctrlr_disable_qpairs.
Finally, fix a couple of spelling errors in comments related to
this.
Relnotes: Yes
MFC After: 1 week
Reviewed by: scottl@ (prior version)
Differential Revision: https://reviews.freebsd.org/D21493
polling within a second. Panic if we don't. All the commands that use this
interface should typically complete within a few tens to hundreds of
microseconds. Panic rather than return ETIMEDOUT because if the command somehow
does later complete, it will randomly corrupt memory. Also, it helps to get a
traceback from where the unexpected failure happens, rather than an infinite
loop.
dump support code, move the while loop into an inline function. These aren't
done in the fast path, so if the compiler choses to not inline, any performance
hit is tiny.
