The mistake came about like this: the first attempt to commit was blocked by
a pre-commit hook due to missing SVN tags. svn revert doesn't delete new
files, I guess. While reapplying the fixed diff, the non-empty target file
was just concatenated with the new contents? Ugh. :-(
This regression was introduced in the r326169 Linux v4.9 Infiniband upgrade.
Restore the functionality.
Reviewed by: hselasky
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21298
Add the new rates that were added to the Infiniband specification as part of
HDR and 2x support.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
For RoCE, when CM requests are received for RC and UD connections,
netdevice of the incoming request is unavailable. Because of that CM
requests are always forwarded to init_net namespace.
Now that we have the GID index available, introduce SGID index in
incoming CM requests and refer to the netdevice of it.
While at it fix some incorrect uses of init_net and make sure
the rdma_create_id() function stores the VNET it is passed.
Based on linux commit:
cee104334c98dd04e9dd4d9a4fa4784f7f6aada9
MFC after: 3 days
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
In r337943 ifnet's if_pcp was set to the PCP value in use
instead of IFNET_PCP_NONE.
Current ibcore code assumes that if_pcp is IFNET_PCP_NONE with
VLAN interfaces so it can identify prio-tagged traffic.
Fix that by explicitly verifying that that the if_type is IFT_ETHER
and not IFT_L2VLAN.
MFC after: 3 days
Approved by: re (Marius), hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
Else a NULL VNET pointer should be ignored. This fixes address resolving
when VIMAGE is disabled.
MFC after: 3 days
Sponsored by: Mellanox Technologies
The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive
the port number from user input as part of its attributes and assumes
it is valid. Down on the stack, that parameter is used to access kernel
data structures. If the value is invalid, the kernel accesses memory
it should not. To prevent this, verify the port number before using it.
Linux commit:
5ecce4c9b17bed4dc9cb58bfb10447307569b77b
a62ab66b13a0f9bcb17b7b761f6670941ed5cd62
5a7a88f1b488e4ee49eb3d5b82612d4d9ffdf2c3
MFC after: 1 week
Sponsored by: Mellanox Technologies
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Linux commit:
2975d5de6428ff6d9317e9948f0968f7d42e5d74
09abfe7b5b2f442a85f4c4d59ecf582ad76088d7
84652aefb347297aa08e91e283adf7b18f77c2d5
MFC after: 1 week
Sponsored by: Mellanox Technologies
When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.
The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.
Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.
The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().
MFC after: 1 week
Sponsored by: Mellanox Technologies
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>
Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Linux commit:
be1d325a335840a86c133a56c6a911c368bac0fd
1c3aea2bc8f0b2e5b57375ead40457ff75a3a2ec
MFC after: 1 week
Sponsored by: Mellanox Technologies
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.
It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.
This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.
This commit combines the following Linux upstream commits:
IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch ensures the GID index is always used as a basis of resolving
incoming RDMA connections, as compared to the GID value itself.
Background:
On a per infiniband port basis, the GID identifier is not a unique identifier!
This assumption falls apart when VLAN ID, IPv6 scope ID and RoCE type,
as supported by RoCE v2, is taken into account. This additional
information is stored in the so-called GID attributes and is needed to
correctly identify the destination network interface for an incoming
connection.
Different VLANs are allowed to define the same IPv4 addresses and especially
for the default IPv6 link-local addresses or when using so-called containers
or jails, this is true.
The VNET information for the destination network interface is needed in
order to perform the L2 address lookup in the right Virtual Network Stack
context.
Consequently old functions previously used by RoCE v1, like
rdma_addr_find_smac_by_sgid() are impossible to support, because
there can be multiple identical GIDs associated with the same
infiniband port, and the answer to such a request becomes undefined.
This function has been removed.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore
Reviewed by: np @
Differential Revision: https://reviews.freebsd.org/D12563
Sponsored by: Mellanox Technologies
MFC after: 3 days
This patch currently supports:
- ibcore as a kernel module only
- krping as a kernel module only
- ipoib as a kernel module only
Sponsored by: Mellanox Technologies
- Added check that the SCOPE ID is only restored for IPv6 linklocal
addresses.
- Changes made by r237263 in the "cma_bind_addr()" function did not
check if the socket address was of type IPv6 and used the IPv4
socket address for IPv6 addresses. This caused the function to
fail. Fixed this.
- In the "rdma_gid2ip()" function and some other places the "sin6_len"
and "sin6_scope_id" fields were not set for IPv6 socket
addresses. Fixed this.
- The scope ID is not stored as part of the GID entries and must be
passed as an argument to "rdma_gid2ip()".
- Added new method to "struct ib_device" which returns a pointer to
the network interface which belongs to the given infiniband
device. This is needed to be able to get the scope ID for IPv6
addresses via the associated ethernet interface.
- Added convenience function, "rdma_get_ipv6_scope_id()", to get the
scope ID for IPv6 addresses.
- Implemented new "get_netdev" method for mlx4ib. Other IB controller
drivers which want to support IPv6 addresses needs to implement this
aswell.
- Bumped the FreeBSD version due to changing "struct ib_device".
Sponsored by: Mellanox Technologies
MFC after: 1 week
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
Highlights:
- Multiple verbs API updates
- Support for RoCE, RDMA over ethernet
All hardware drivers depending on the common infiniband stack has been
updated aswell.
Discussed with: np @
Sponsored by: Mellanox Technologies
MFC after: 1 month
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
MFC after: 1 week
Sponsored by: Mellanox Technologies
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Removed the ifdef linux from this function.
Added stub function for contiguous pages to avoid compilation
errors.
Submitted by: Orit Moskovich (oritm mellanox.com)
Approved by: re
Update the OFED Infiniband core to the version supplied in Linux
version 3.7.
The update to OFED is nearly all additional defines and functions
with the exception of the addition of additional parameters to
ib_register_device() and the reg_user_mr callback.
In addition the ibcore (Infiniband core) and ipoib (IP over Infiniband)
have both been made into completely loadable modules to facilitate
testing of the OFED stack in FreeBSD.
Finally the Mellanox Infiniband drivers are now updated to the
latest version shipping with Linux 3.7.
Submitted by: Mellanox FreeBSD driver team:
Oded Shanoon (odeds mellanox.com),
Meny Yossefi (menyy mellanox.com),
Orit Moskovich (oritm mellanox.com)
Approved by: re
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
