linux_common.c to linux_util.c so they become available on i386.
linux_common.c defines the linux_common kernel module but this module does
not exist on i386 and linux_common.c is not included in the linux module.
linux_util.c is included in the linux_common module on amd64 and the linux
module on i386.
Remove linux_common.c from files.i386 again. It was added recently in
r367433 when the DTrace provider definitions were moved.
The V4L feature declarations were moved to linux_common in r283423.
- map those IPv4 / IPv6 socket options which exist in FreeBSD
+ most of them visually verified to have the same type/layout of arguments
+ not tested with linux programs to behave as intended
- be more human readable for known options which are not handled
- be more verbose for unhandled socket message flags we know about
- print the jail ID in linux_msg if run in a jail
- add possibility to print debug message about known missing parts only once
- add multiple levels of sysctl linux.debug:
1: print debug messages, tell about unimplemented stuff (only once)
2: like 1, but also print messages about implemented but not tested
stuff (only once)
3+: like 2, but no rate limiting of messages
- increase default linux debug level from 1 to 3
We are a lot more verbose in as we need to be (e.g. some of the IP socket
options which are the same, and share the same memory layout, and are
believed to work). The reason is that we have no good testsuite to test those
linux-bits. The LTP or other test suites like the python one, are not fully
up to the task we need. As such the excessive messages about emulated but not
tested socket options.
IMO any MFC (possible, but most probably not by me) should set the default
debug level to 1.
Discussed with: trasz
the debug messages. While here, clean up some variable naming.
Reviewed by: bcr (manpages), emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25230
than "/compat/linux". Useful when you have several compat directories
with different Linux versions and you don't want to clash with files
installed by linux-c7 packages.
Reviewed by: bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22574
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Expose more information about PCI devices (and GPUs in particular) via
linsysfs to libdrm.
This allows unmodified modern 64-bit Linux libdrm to work, which allows
modern Linux Mesa to work. The submitter reports that he tested the change
with an Ubuntu 16.04 chroot + amdgpu from graphics/drm-next-kmod.
PR: 222375
Submitted by: Greg V <greg AT unrelenting.technology>
around kqueue() to implement epoll subset of functionality.
The kqueue user data are 32bit on i386 which is not enough for
epoll user data, so we keep user data in the proc emuldata.
Initial patch developed by rdivacky@ in 2007, then extended
by Yuri Victorovich @ r255672 and finished by me
in collaboration with mjg@ and jillies@.
Differential Revision: https://reviews.freebsd.org/D1092
following primary purposes:
1. Remove the dependency of linsysfs and linprocfs modules from linux.ko,
which will be architecture specific on amd64.
2. Incorporate into linux_common.ko general code for platforms on which
we'll support two Linuxulator modules (for both instruction set - 32 & 64 bit).
3. Move malloc(9) declaration to linux_common.ko, to enable getting memory
usage statistics properly.
Currently linux_common.ko incorporates a code from linux_mib.c and linux_util.c
and linprocfs, linsysfs and linux kernel modules depend on linux_common.ko.
Temporarily remove dtrace garbage from linux_mib.c and linux_util.c
Differential Revision: https://reviews.freebsd.org/D1072
In collaboration with: Vassilis Laganakos.
Reviewed by: trasz
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
- DTrace scripts to check for errors, performance, ...
they serve mostly as examples of what you can do with the static probe;s
with moderate load the scripts may be overwhelmed, excessive lock-tracing
may influence program behavior (see the last design decission)
Design decissions:
- use "linuxulator" as the provider for the native bitsize; add the
bitsize for the non-native emulation (e.g. "linuxuator32" on amd64)
- Add probes only for locks which are acquired in one function and released
in another function. Locks which are aquired and released in the same
function should be easy to pair in the code, inter-function
locking is more easy to verify in DTrace.
- Probes for locks should be fired after locking and before releasing to
prevent races (to provide data/function stability in DTrace, see the
man-page of "dtrace -v ..." and the corresponding DTrace docs).
Code should just use the devtoname() function to obtain the name of a
character device. Also add const keywords to pieces of code that need it
to build properly.
MFC after: 2 weeks
In the mpsafetty branch, Linux sshd seems to work properly inside a
jail. Some small modifications had to be made to the Linux compatibility
layer.
The Linux PTY routines always expect the device major number to be 136
or higher. Our code always set the major/minor number pair to 136:0.
This makes routines like ttyname() and ptsname() fail, because we'll end
up having ambiguous device numbers.
The conversion was not performed on all *stat() routines, which meant in
some cases the numbers didn't get transformed. By pushing the conversion
into linux_driver_get_major_minor(), the transformation will take place
on all calls.
Approved by: philip (mentor), rdivacky
- TLS - complete
- pid/tid mangling - complete
- thread area - complete
- futexes - complete with issues
- clone() extension - complete with some possible minor issues
- mq*/timer*/clock* stuff - complete but untested and the mq* stuff is
disabled when not build as part of the kernel with native FreeBSD mq*
support (module support for this will come later)
Tested with:
- linux-firefox - works, tested
- linux-opera - works, tested
- linux-realplay - doesnt work, issue with futexes
- linux-skype - doesnt work, issue with futexes
- linux-rt2-demo - works, tested
- linux-acroread - doesnt work, unknown reason (coredump) and sometimes
issue with futexes
- various unix utilities in linux-base-gentoo3 and linux-base-fc4:
everything tried worked
On amd64 not everything is supported like on i386, the catchup is planned for
later when the remaining bugs in the new functions are fixed.
To test this new stuff, you have to run
sysctl compat.linux.osrelease=2.6.16
to switch back use
sysctl compat.linux.osrelease=2.4.2
Don't switch while running a linux program, strange things may or may not
happen.
Sponsored by: Google SoC 2006
Submitted by: rdivacky
Some suggestions/help by: jhb, kib, manu@NetBSD.org, netchild
Add back in a scheme to emulate old type major/minor numbers via hooks into
stat, linprocfs to return major/minors that Linux app's expect. Currently
only /dev/null is always registered. Drivers can register via the Linux
type shim similar to the ioctl shim but by using
linux_device_register_handler/linux_device_unregister_handler functions.
The structure is:
struct linux_device_handler {
char *bsd_driver_name;
char *linux_driver_name;
char *bsd_device_name;
char *linux_device_name;
int linux_major;
int linux_minor;
int linux_char_device;
};
Linprocfs uses this to display the major number of the driver. The
soon to be available linsysfs will use it to fill in the driver name.
Linux_stat uses it to translate the major/minor into Linux type values.
Note major numbers are dynamically assigned via passing in a -1 for
the major number so we don't need to keep track of them.
This is somewhat needed due to us switching to our devfs. MegaCli
will not run until I add in the linsysfs and mfi Linux compat changes.
Sponsored by: IronPort Systems
of adding the code to lock and unlock the vnodes and taking care
to avoid deadlock, simplify linux_emul_convpath() by comparing the
vnode pointers directly instead of comparing their va_fsid and
va_fileid attributes. This allows the removal of the calls to
VOP_GETATTR().
code, make the emulator use it.
Rename unsupported_msg() to unimplemented_syscall(). Rename some arguments
for clarity
Fixup grammar.
Requested by: bde
linux_emul_find() that does not use stack gap storage but instead
always returns the resulting path in a malloc'd kernel buffer.
Implement linux_emul_find() in terms of this function. Also add
LCONVPATH* macros that wrap linux_emul_convpath in the same way
that the CHECKALT* macros wrap linux_emul_find().
linux_emul_path anyway. Linux_emul_find() has interesting bugs in its
prefix handling (which luckily are not currently exploitable); this
commit is preliminary to an attempt at cleaning it up.
Approved by: marcel
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
to construct a path that was long enough (ie longer than
SPARE_USRSPACE bytes) and trash the stack.
Note that SPARE_USRSPACE is much smaller than MAXPATHLEN so that
the Linuxulator will now return ENAMETOOLONG even if the path
is smaller than MAXPATHLEN.
PR: 12749
