Reserve one page for the DMA subsystem, that may need it when the I/O
buffer is not page aligned.
Without this change, writes with the maximum allowed size failed, if:
- physical memory was fragmented, making it necessary to use one DMA
segment for each page
- the buffer to be written was not page aligned, causing the DMA
subsystem to need one extra segment
In the scenario above, the DMA subsystem would run out of segments,
resulting in a write with no SG segments, that would fail.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30798
Without this change, if an AIF interrupt comes at the same time a SYNC
command is finished, the SYNC interrupt will be lost. This happens because
all interrupt bits (bellbits) are cleared, but only one of them is handled.
Debugging shows that, (at least) when !sc->msi_enabled and (sc->flags &
AAC_FLAGS_SYNC_MODE) is true (sync mode), both bits may be set at the same
time.
PR: 237463
Reviewed by: scottl
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23859
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
This issue was observed on a PowerPC64 machine with an Adaptec RAID Controller
with PCI device ID 0x028d. After several read/write operations, the kernel was
panic'ing in bus_dmamap_sync(). This was due to a missing aac_unmap_command()
in the SYNC path.
PR: 237463
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D23668
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Also, Giant isn't required to busy / unbusy a device, so drop that too while I'm
here. It's not done elsewhere in the tree and in the future will likely be
handled by a node lock to ensure consistency. Leave Giant in place for attach
and removing childing, as that's actually still needed, even if imperfect.
Remove stale comment about contigmalloc taking Giant and calling w/o the lock
held. Neither of these is still true.
has been in the PR system for 5 months and then on reviews for another 5.
Nobody came with any cases where it fails, while many people cried for
it to be commited & merged.
PR: 209468
Submitted by: Prasad B M <prasad.munirathnam@microsemi.com>
Reported by: Steven Peterson <scp@mainstream.net>
Approved by: scottl
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18408
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
illumos/illumos-gate@79809f9cf479809f9cf4https://www.illumos.org/issues/8269
It seems that currently normalization of stddev aggregation is done
incorrectly.
We divide both the sum of values and the sum of their squares by the
normalization factor. But we should divide the sum of squares by the
normalization factor squared to scale the original values properly.
FreeBSD note: the actual change was committed in r316853, this commit
adds the test files and record merge information.
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
Sponsored by: Panzura
anything janky from a user. (cturt)
aac(4): landergriffith+freebsdbugzilla@gmail.com pointed out that aacraid(4)
had the same issue and handling of pointers, so let's change that too.
PR: 206573
Submitted by: cturt@hardenedbsd.org
Obtained from: HardenedBSD
MFC after: 1 week
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370
Full MSI-X interrupt support added.
Timeout and reset handling reworked, firmware flash update test added.
Support for drives with 4KB block size added.
Changes made to avoid exposure of phys. array components by default.
Approved by: scottl (mentor), emaste (co-mentor)
__amd64__, and thus limited. Eliminate 2 trivial conditionals by
casting the 64-bit integral, holding an address, via (uintptr_t)
to (void *) and replace the last remaining check for __amd64__
with a check for __LP64__ instead.
