Fix detach routine.
Driver was tested on EspressoBin.
Remove it from GENERIC, since now it can be loaded automatically.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31580
Previosuly the link status was pooled in an infinite loop in a separate
kproc. Use taskqueue subsytem instead. This is a prequisite for making
this driver work as a loadable module.
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D31579
With more ports, some of the registers are shifted a bit to accommodate.
This switch also adds two high speed Serdes/SGMII interfaces (2.5 Gb/s).
Sponsored by: Rubicon Communications, LLC (Netgate)
In the latest Linux kernel revisions the DSA (Distributed
Switch Architecture) device tree binding was changed.
Instead of the top level dsa@ node, the switch and its
ports is represented as a child node of the mdio bus.
With that other modifications were added, such as
relation with the ethernet port of the SoC. Adjust
e6000sw etherswitch and mvneta drivers to that.
Tested on Armada 3720 EspressoBin and Armada 388 Clearfog Pro boards.
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19036
Some devices cannot rely on the switch MDIO address passed in the DTB
for specifying single/multi-chip addressing mode. Introduce new property
"single-chip-addressing" which added to DTS will force single-chip mode.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14800
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
This patch is cosmetic. It checks if allocation of ifnet structure failed.
It's better to have this check rather than assume positive scenario.
Submitted by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Reduce the use of local copies of switch register data.
The switch now works with the upstream dsa node (i.e. the upstream DTS).
Tested on: ClearFog Pro (88E6176), SG-3100 (88E6141)
Sponsored by: Rubicon Communications, LLC (Netgate)
r319886 ("Add the initial support for the Marvell 88E6141
and 88E6341 switches.") unveiled a problem with possible
multiple lock creation. Move its initialization
to the driver attach and for obtaining the switch ID
create a temprorary one, which is immediately destroyed
after the check.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Right now the driver only supports port VLANs, so make sure
etherswitch_getinfo() return the proper switch capabilities.
Handle the cases where not all ports are in use (that will also require
etherswitch cooperation).
Sponsored by: Rubicon Communications, LLC (Netgate)
e6000sw family automatically reflects PHY status in each port's registers.
Therefore it is not necessary to do a full PHY polling squence, which
results in much quicker operation and much less significant usage of
the SMI bus.
Care must be taken that the resulting ifmedia_active is identical to
what the PHY will compute, or gratuitous link status changes will
occur whenever the PHYs update function is called.
This patch implements above improvement. On the occasion set a pointer to
the proc structure to be part of software context instead of being
a global variable.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10714
Hitherto implementation of PHY polling resulted in a risk of an
endless loop and very high occupation of the SMI bus. Improve the
operation by limiting the polling tries and adding sleepable
pause.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10713
Malloc should always return something when M_WAITOK flag is used,
but keep this code and change flag to M_NOWAIT as it is under a lock
(allows for possible future change). Free ifnet structure to avoid
memory leak on failure.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10711
cannot access the GLOBAL2 register directly.
Despite the comment in code (which was misleading), the indirect access is
only used to read the switch CONFIG data from the scrap register and not
for the GLOBAL2 access.
Use the dsa data to define when the switch is in the Multi Chip Addressing
Mode (a even address different than zero).
While here fix a typo.
Sponsored by: Rubicon Communications, LLC (Netgate)
This patch brings 802.1q support for Marvell 88E606x ethernet switches.
Test is done on 88E6065 chip (Aterm WR1200).
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10144
- recognize ports and vlangroups based on DTS file
- support multi-chip addresing mode (required in upcoming
Armada-388-Clearfog support)
- refactor attachment function
Each port in 'dsa' node should have 'vlangroup' property. Otherwise,
e6000sw will fail to attach.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D7328
The mdio driver interface is generally useful for devices that require
MDIO without the full MII bus interface. This lifts the driver/interface
out of etherswitch(4), and adds a mdio(4) man page.
Submitted by: Landon Fuller <landon@landonf.org>
Differential Revision: https://reviews.freebsd.org/D4606
Add e6000sw driver supporting Marvell 88E6352, 88E6172, 88E6176 switches.
It needs to be attached to mdio interface, exporting SMI access
functionality. e6000sw supports port-based VLAN configuration, per-port
media changing, accessing PHY and switch registers.
e6000sw attaches miibuses and PHY drivers as children. Instead of typical
tick as callout, kthread-based tick is used. This combined with SX locks
allows MDIO read/write calls to sleep. It is expected, because this
hardware requires long delays in SMI read/write procedures, which can not
be handled by busy-waiting.
Reviewed by: adrian
Obtained from: Semihalf
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3902
