vtophys() when loading mbufs for transmission and reception. While at
it all pointer arithmetic and cast qualifier issues were fixed, mostly
related to transmission and reception.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4284
- Added support for dumping the SFP EEPROM content to dmesg.
- Fixed handling of network interface capability IOCTLs.
- Fixed race when loading and unloading the mlxen driver by applying
appropriate locking.
- Removed two unused C-files.
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4283
with fresh firmware. The low level code is based on code provided by
Mellanox.
Thanks to Mellanox and their distributor Must (http://mustcompany.ru)
for providing hardware.
In collaboration with: Andre Melkoumian <andre mellanox.com>
Reviewed by: hselasky
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
drivers can use it. This avoids some code duplication. Add missing
default case to all switch statements while at it. Also move the
hashing of the IPv6 flow field to layer 4 because the IPv6 flow field
is constant on a per L4 connection basis and not on a per L3 network.
Differential Revision: https://reviews.freebsd.org/D1987
Sponsored by: Mellanox Technologies
MFC after: 1 month
> List of fixes:
* use correct format for GID printouts
* double array indexing
* spelling in printouts
* void pointer arithmetic
* allow more receive rings
* correct maximum number of transmit rings
* use "const" instead of "static" for constants
* check for invalid VLAN tags
* check for lack of IRQ resources
> Added more hardware specific defines
> Added more verbose printouts of firmware status codes
Sponsored by: Mellanox Technologies
MFC after: 3 days
this option from all modules that enable it theirselves.
In C mode -fms-extensions option enables anonymous structs and unions,
allowing us to use this C11 feature in kernel. Of course, clang supports
it without any extra options.
Reviewed by: dim
"MODULE_VERSION" macro definition. Remove the redefinition of the
"MODULE_VERSION" macro from the Linux kernel compatibility API.
MFC after: 1 month
Reported by: np@
Sponsored by: Mellanox Technologies
by dumbbell@ to be able to compile this layer as a dependency module.
Clean up some Makefiles and remove the no longer used OFED define.
Currently only i386 and amd64 targets are supported.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
Reviewed by: adrian, rmacklem
Sponsored by: Mellanox Technologies
MFC after: 1 week
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
MFC after: 1 week
Sponsored by: Mellanox Technologies
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
MFC after: 1 week
Sponsored by: Mellanox Technologies
prior to starting "/sbin/init" which will run all the "/etc/rc.d/xxx"
scripts. Else there can be a race configuring the interfaces via
"/etc/rc.conf".
MFC after: 4 weeks
Sponsored by: Mellanox Technologies
Remove duplicate "debug_ktr.mask" sysctl definition.
Remove now unused variable from "kern_ktr.c".
This fixes build of "ktr" which was broken by r267961.
Let the default value for "vm_kmem_size_scale" be zero. It is setup
after that the sysctl has been initialized from "getenv()" in the
"kmeminit()" function to equal the "VM_KMEM_SIZE_MAX" value, if
zero. On Sparc64 the "VM_KMEM_SIZE_MAX" macro is not a constant. This
fixes build of Sparc64 which was broken by r267961.
Add a special macro to dynamically create SYSCTL root nodes, because
root nodes have a special parent. This fixes build of existing OFED
module and CANBUS module for pc98 which was broken by r267961.
Add missing "sysctl.h" includes to get the needed sysctl header file
declarations. This is needed after r267961.
MFC after: 2 weeks
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
modules which require this flag to compile. Use a GCC_MS_EXTENSIONS
variable, defined in kern.pre.mk, which can be used to easily supply the
flag (or not), depending on the compiler type.
MFC after: 3 days
We need to do this because the Linux compat layer uses sx(9) for
mutex, however the lagg code uses rmlocks and calls into the mellanox
driver. This causes deadlock due to sleeping while holding a rmlock.
Submitted by: Shahar Klein (shahark mellanox.com)
MFC After: 3 days.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
The order of releasing resources in mlxen was wrong, which caused
panic on reload of the module.
conf_ctx list should be released before stat_ctx list, otherwise
the leafs in conf_ctx list won't be released because of the dependancy.
The fix is to change the order of the releases.
Submitted by: Shahar Klein (shahark at mellanox.com)
Changed module init from module_init() to module_init_order() with
SI_ORDER_MIDDLE flag
Submitted by: Orit Moskovich (oritm mellanox.com)
Approved by: re
Update the OFED Infiniband core to the version supplied in Linux
version 3.7.
The update to OFED is nearly all additional defines and functions
with the exception of the addition of additional parameters to
ib_register_device() and the reg_user_mr callback.
In addition the ibcore (Infiniband core) and ipoib (IP over Infiniband)
have both been made into completely loadable modules to facilitate
testing of the OFED stack in FreeBSD.
Finally the Mellanox Infiniband drivers are now updated to the
latest version shipping with Linux 3.7.
Submitted by: Mellanox FreeBSD driver team:
Oded Shanoon (odeds mellanox.com),
Meny Yossefi (menyy mellanox.com),
Orit Moskovich (oritm mellanox.com)
Approved by: re
- Remove an incorrect assertion that can trigger when downing an interface.
- Stop the interface during detach to avoid panics when unloading the
driver.
- A few locking fixes to be more consistent with other FreeBSD drivers:
- Protect if_drv_flags with the driver lock, not atomic ops
- Hold the driver lock when adjusting multicast state.
- Hold the driver lock while adjusting if_capenable.
PR: kern/180791 [1,2]
Submitted by: Shakar Klein @ Mellanox [1,2]
MFC after: 3 days
- Only enable UDP/TCP hardware checksums if CSUM_UDP or CSUM_TCP is set.
- Only enable IP hardware checksums if CSUM_IP is set.
PR: kern/180430
Submitted by: Meny Yossefi <menyy@mellanox.com>
MFC after: 1 week
generic and apply to all sysfs attributes:
- Use sysctl_handle_string() instead of reimplementing it.
- Remove trailing newline from the current value before passing it to
userland and append a newline to the new string value before passing it
to the attribute's store function.
- Don't leak the temporary buffer if the first error check triggers.
- Revert earlier change to mlx4 port mode handler.
PR: kern/174213
Submitted by: Garrett Cooper
Reviewed by: Shakar Klein @ Mellanox
MFC after: 1 week
