The save_if_input function pointer was meant to save the previous
value of ifp->if_input before replacing it with the emulated
adapter hook.
However, the same pointer value is already stored in the if_input
field of the netmap_adapter struct, to be used for host TX ring processing.
Reuse the netmap_adapter if_input field to simplify the code
and save some space.
MFC after: 14 days
Netmap users on FreeBSD are not supposed to import code from the
github netmap repository anymore. They should use the code that
is available in the src repo. We can therefore drop the compatibility
code.
MFC after: 7 days
This feature enables applications to ask netmap to transmit or
receive packets starting at a user-specified offset from the
beginning of the netmap buffer. This is meant to ease those
packet manipulation operations such as pushing or popping packet
headers, that may be useful to implement software switches,
routers and other packet processors.
To use the feature, drivers (e.g., iflib, vtnet, etc.) must have
explicit support. This change does not add support for any driver,
but introduces the necessary kernel changes. However, offsets support
is already included for VALE ports and pipes.
removed from objects including calls to free. Pages must not be xbusy
when freed and not on an object. Strengthen assertions to match these
expectations. In practice very little code had to change busy handling
to meet these rules but we can now make stronger guarantees to busy
holders and avoid conditionally dropping busy in free.
Refine vm_page_remove() and vm_page_replace() semantics now that we have
stronger guarantees about busy state. This removes redundant and
potentially problematic code that has proliferated.
Discussed with: markj
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22822
Atomics are used for page busy and valid state when the shared busy is
held. The details of the locking protocol and valid and dirty
synchronization are in the updated vm_page.h comments.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21594
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
This patch fixes 2 panics. The first one is due to the current VNET not
being set in the emulated adapter transmission path. The second one
is caused by the M_PKTHDR flag not being set when preallocated mbufs
are recycled in the transmit path.
Submitted by: aleksandr.fedorov@itglobal.com
Reviewed by: vmaffione
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20824
These are obviously missing from the .c files, but don't show up in any
tinderbox configuration (due to latent header pollution of some kind). It
seems some configurations don't have this pollution, and the includes are
obviously missing, so go ahead and add them.
Reported by: Peter Jeremy <peter AT rulingia.com>
X-MFC-With: r347984
This change adds a counter (kqueue_users) to keep track of how many
kqueue users are referencing a given struct nm_selinfo.
In this way, nm_os_selwakeup() can schedule the kevent notification
task only when kqueue is actually being used.
This is important to avoid wasting CPU in the common case where
kqueue is not used.
Reviewed by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19177
Changelist:
- Replace ND, D and RD macros with nm_prdis, nm_prinf, nm_prerr
and nm_prlim, to avoid possible naming conflicts.
- Add netmap_krings_mode_commit() helper function and use that
to reduce code duplication.
- Refactor pipes control code to export some functions that
can be reused by the veth driver (on Linux) and epair(4).
- Add check to reject API requests with version less than 11.
- Small code refactoring for the null adapter.
MFC after: 1 week
When using poll(), select() or kevent() on netmap file descriptors,
netmap executes the equivalent of NIOCTXSYNC and NIOCRXSYNC commands,
before collecting the events that are ready. In other words, the
poll/kevent callback has side effects. This is done to avoid the
overhead of two system call per iteration (e.g., poll() + ioctl(NIOC*XSYNC)).
When the kqueue subsystem invokes the kqueue(9) f_event callback
(netmap_knrw), it holds the lock of the struct knlist object associated
to the netmap port (the lock is provided at initialization, by calling
knlist_init_mtx).
However, netmap_knrw() may need to wake up another netmap port (or even
the same one), which means that it may need to call knote().
Since knote() needs the lock of the struct knlist object associated to
the to-be-wake-up netmap port, it is possible to have a lock order reversal
problem (AB/BA deadlock).
This change prevents the deadlock by executing the knote() call in a
per-selinfo taskqueue, where it is possible to hold a mutex.
Reviewed by: aleksandr.fedorov_itglobal.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18956
On sync-kloop stop, send a wake-up signal to the kloop, so that
waiting for the timeout is not needed.
Also, improve logging in netmap_freebsd.c.
MFC after: 3 days
The nm_os_selwakeup function needs to call knote() to wake up kqueue(9)
users. However, this function can be called from different code paths,
with different lock requirements.
This patch fixes the knote() call argument to match the relavant lock state.
Also, comments have been updated to reflect current code.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=219846
Reported by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18876
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
Revision r307394 removed (by mistake) the code that sets IFCAP_NETMAP
in if_capabilities on netmap_attach. This patch reverts this change.
Reviewed by: np
Approved by: gnn (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17987
Changelist:
- Move large parts of VALE code to a new file and header netmap_bdg.[ch].
This is useful to reuse the code within upcoming projects.
- Improvements and bug fixes to pipes and monitors.
- Introduce nm_os_onattach(), nm_os_onenter() and nm_os_onexit() to
handle differences between FreeBSD and Linux.
- Introduce some new helper functions to handle more host rings and fake
rings (netmap_all_rings(), netmap_real_rings(), ...)
- Added new sysctl to enable/disable hw checksum in emulated netmap mode.
- nm_inject: add support for NS_MOREFRAG
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17364
The libkqueue tests have several places that leak memory by using an
idiom like:
puts(kevent_to_str(kevp));
Rework to save the pointer returned from kevent_to_str() and then
free() it after it has been used.
Reported by: asomers (pointer to Coverity), Coverity
CID: 1296063, 1296064, 1296065, 1296066, 1296067, 1350287, 1394960
Sponsored by: Dell EMC
Changelist:
- Turn tx_rings and rx_rings arrays into arrays of pointers to kring
structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
vtnet and ptnet drivers to cope with the change.
- Generalize the nm_config() callback to accept a struct containing many
parameters.
- Introduce NKR_FAKERING to support buffers sharing (used for netmap
pipes)
- Improved API for external VALE modules.
- Various bug fixes and improvements to the netmap memory allocator,
including support for externally (userspace) allocated memory.
- Refactoring of netmap pipes: now linked rings share the same netmap
buffers, with a separate set of kring pointers (rhead, rcur, rtail).
Buffer swapping does not need to happen anymore.
- Large refactoring of the control API towards an extensible solution;
the goal is to allow the addition of more commands and extension of
existing ones (with new options) without the need of hacks or the
risk of running out of configuration space.
A new NIOCCTRL ioctl has been added to handle all the requests of the
new control API, which cover all the functionalities so far supported.
The netmap API bumps from 11 to 12 with this patch. Full backward
compatibility is provided for the old control command (NIOCREGIF), by
means of a new netmap_legacy module. Many parts of the old netmap.h
header has now been moved to netmap_legacy.h (included by netmap.h).
Approved by: hrs (mentor)
Changelist:
- remove unused nkr_slot_flags
- new nm_intr adapter callback to enable/disable interrupts
- remove unused sysctls and document the other sysctls
- new infrastructure to support NS_MOREFRAG for NIC ports
- support for external memory allocator (for now linux-only),
including linux-specific changes in common headers
- optimizations within netmap pipes datapath
- improvements on VALE control API
- new nm_parse() helper function in netmap_user.h
- various bug fixes and code clean up
Approved by: hrs (mentor)
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
version.
This commit contains mostly refactoring, a few fixes and minor added
functionality.
Submitted by: Vincenzo Maffione <v.maffione at gmail.com>
Requested by: many
Sponsored by: Rubicon Communications, LLC (Netgate)
* Firmware oriented NICs may need to sleep in their configuration paths.
Use RLOCK instead of WLOCK to allow this to again occur.
This fixes netmap on cxgbe.
* Change the worker lock to a normal mutex rather than a spin lock.
Drivers shouldn't be doing netmap work from the fast interrupt
handlers, so it's not required to be a spinlock.
Submitted by: luigi, Vincenzo Maffione <v.maffione@gmail.com>
Reviewed by: jhb
Attempt to fix powerpc64 LINT kernel broken by r308000. Netmap's use of
a uint64_t wchan seems odd, but in the interest of minimizing this
change just cast through uintptr_t to silence the compiler warning.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8669
- use PCI_VENDOR and PCI_DEVICE ids from a publicly allocated range
(thanks to RedHat)
- export memory pool information through PCI registers
- improve mechanism for configuring passthrough on different hypervisors
Code is from Vincenzo Maffione as a follow up to his GSOC work.
fix build on 32 bit platforms
simplify logic in netmap_virt.h
The commands (in net/netmap.h) to configure communication with the
hypervisor may be revised soon.
At the moment they are unused so this will not be a change of API.
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
(detected by jenkins run with gcc 4.9)
Update documentation on the use of netmap_priv_d,
rename the refcount and use the same structure in
FreeBSD and linux
No functional changes.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:
- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)
- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)
- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html
- fix rx CRC handing on ixl
- add module dependencies for netmap when building drivers as modules
- minor simplifications to device-specific routines (*txsync, *rxsync)
- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,
Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).
Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.
MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.
Basically no user API changes (some bugfixes in sys/net/netmap_user.h).
In detail:
1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.
2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial
3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.
4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.
5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).
A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.
Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.
This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.
A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.
MFC after: 3 days.
