Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals.
MFC r198590:
Trapsignal() calls kern_sigprocmask() when delivering catched signal
with proc lock held.
MFC r198670:
For trapsignal() and postsig(), kern_sigprocmask() is called with
both process lock and curproc->p_sigacts->ps_mtx locked. Prevent lock
recursion on ps_mtx in reschedule_signals().
Make sure that the primary native brandinfo always gets added
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
lindev(4) [1] is supposed to be a collection of linux-specific pseudo
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
- Add hw.clflush_disable loader tunable to avoid panic (trap 9) at
map_invalidate_cache_range() even if CPU is not Intel.
- This tunable can be set to -1 (default), 0 and 1. -1 is same as
current behavior, which automatically disable CLFLUSH on Intel CPUs
without CPUID_SS (should be occured on Xen only). You can specify 1
when this panic happened on non-Intel CPUs (such as AMD's). Because
disabling CLFLUSH may reduce performance, you can try with setting 0
on Intel CPUs without SS to use CLFLUSH feature.
- Amd64 init_secondary() calls initializecpu() while curthread is
still not properly set up. r199067 added the call to
TUNABLE_INT_FETCH() to initializecpu() that results in hang because
AP are started when kernel environment is already dynamic and thus
needs to acquire mutex, that is too early in AP start sequence to
work.
Extract the code that should be executed only once, because it sets
up global variables, from initializecpu() to initializecpucache(),
and call the later only from hammer_time() executed on BSP. Now,
TUNABLE_INT_FETCH() is done only once at BSP at the early boot
stage.
There are known issues with this driver that are beyond what can be
fixed for 8.0-RELEASE and the bugs can cause boot failure on some systems.
It's not clear if it impacts all systems and there is interest in getting
the problem fixed so for now just comment it out instead of remove it.
Commit straight to stable/8, this is an 8.0-RELEASE issue. Head was left
alone so work on it can continue there.
Reviewed by: Primary misc. architecture maintainers (marcel, marius)
Consolidate CPUID to CPU family/model macros for amd64 and i386 to reduce
unnecessary #ifdef's for shared code between them.
This MFC should unbreak the kernel build breakage introduced by
r198977.
Reported by: kib
Pointy hat to: me
Opteron rev E family of processor expose a bug where acq memory barriers
can be broken, resulting in random breakages.
Printout a warning message if affecred family and model are found.
Fix some problems with effective mmap() offsets > 32 bits. This was
partially fixed on amd64 earlier. Rather than forcing linux_mmap_common()
to use a 32-bit offset, have it accept a 64-bit file offset. This offset
is then passed to the real mmap() call. Rather than inventing a structure
to hold the normal linux_mmap args that has a 64-bit offset, just pass
each of the arguments individually to linux_mmap_common() since that more
closes matches the existing style of various kern_foo() functions.
Extract the code to find and map the MADT ACPI table during early kernel
startup and genericize it so it can be reused to map other tables as well:
- Add a routine to walk a list of ACPI subtables such as those used in the
APIC and SRAT tables in the MI acpi(4) driver.
- Move the routines for mapping and unmapping an ACPI table as well as
mapping the RSDT or XSDT and searching for a table with a given signature
out into acpica_machdep.c for both amd64 and i386.
Define architectural load bases for PIE binaries.
MFC r198203 (by marius):
Change load base for sparc to match default gcc memory layout model.
Approved by: re (kensmith)
Per their definition, atomic instructions used in conjuction with
memory barriers should also ensure that the compiler doesn't reorder paths
where they are used. GCC, however, does that aggressively, even in
presence of volatile operands. The most reliable way GCC offers for avoid
instructions reordering is clobbering "memory".
Not all our memory barriers, right now, clobber memory for GCC-like
compilers.
Fix these cases.
Approved by: re (kib)
As a workaround, for Intel CPUs, do not use CLFLUSH in
pmap_invalidate_cache_range() when self-snoop is apparently not reported
in cpu features.
Approved by: re (bz, kensmith)
- Split the logic to parse an SMAP entry out into a separate function on
amd64 similar to i386. This fixes a bug on amd64 where overlapping
entries would not cause the SMAP parsing to stop.
- Change the SMAP parsing code to do a sorted insertion into physmap[]
instead of an append to support systems with out-of-order SMAP entries.
Approved by: re (kib)
for stable branches:
- shift to MALLOC_PRODUCTION
- turn off automatic crash dumps
- Remove kernel debuggers, INVARIANTS*[1], WITNESS* from
GENERIC kernel config files[2]
[1] INVARIANTS* left on for ia64 by request marcel
[2] sun4v was left as-is
Reviewed by: marcel, kib
Approved by: re (implicit)
Don't attempt to bind the current thread to the CPU an IRQ is bound to
when removing an interrupt handler from an IRQ during shutdown. During
shutdown we are already bound to CPU 0 and this was triggering a panic.
Approved by: re (kib)
- Improve pmap_change_attr() on i386 so that it is able to demote a large
(2/4MB) page into 4KB pages as needed. This should be fairly rare in
practice.
- Simplify pmap_change_attr() a bit:
- Always calculate the cache bits instead of doing it on-demand.
- Always set changed to TRUE rather than only doing it if it is false.
Approved by: re (kib)
Make sure FreeBSD binaries without .note.ABI-tag section work
correctly and do not match a colliding Debian GNU/kFreeBSD
brandinfo statements.
For this mark the Debian GNU/kFreeBSD brandinfo that it must have
an .note.ABI-tag section and ignore the old EI_OSABI brandinfo
when comparing a possibly colliding set of options.
Due to SYSINIT we add the brandinfo in a non-deterministic order,
so native FreeBSD is not always first. We may want to consider
to force native FreeBSD to come first as well.
The only way a problem could currently be noticed is when running an
i386 binary without the .note.ABI-tag on amd64 and the Debian GNU/kFreeBSD
brandinfo was matched first, as the fallback to ld-elf32.so.1 does
not exist in that case.
Reported and tested by: ticso
In collaboration with: kib
MFC after: 3 days
Approved by: re (rwatson)
Swap the start/end virtual addresses in pmap_invalidate_cache_range().
This fixes the functionality on non SelfSnoop hardware.
Found by: rnoland
Submitted by: alc
Reviewed by: kib
Approved by: re (rwatson)
Fix handling of .note.ABI-tag section for GNU systems [1].
Handle GNU/Linux according to LSB Core Specification 4.0,
Chapter 11. Object Format, 11.8. ABI note tag.
Also check the first word of desc, not only name, according to
glibc abi-tags specification to distinguish between Linux and
kFreeBSD.
Add explicit handling for Debian GNU/kFreeBSD, which runs
on our kernels as well [2].
In {amd64,i386}/trap.c, when checking osrel of the current process,
also check the ABI to not change the signal behaviour for Linux
binary processes, now that we save an osrel version for all three
from the lists above in struct proc [2].
These changes make it possible to run FreeBSD, Debian GNU/kFreeBSD
and Linux binaries on the same machine again for at least i386 and
amd64, and no longer break kFreeBSD which was detected as GNU(/Linux).
PR: kern/135468
Submitted by: dchagin [1] (initial patch)
Suggested by: kib [2]
Tested by: Petr Salinger (Petr.Salinger seznam.cz) for kFreeBSD
Reviewed by: kib
Approved by: re (kensmith)
Check whether the SMBIOS reports reasonable amount of memory. If it is
less than "avail memory", fall back to Maxmem to avoid user confusion.
We use SMBIOS information to display "real memory" since r190599 but
some broken SMBIOS implementation reported only half of actual memory.
Tested by: bz
Approved by: re (kib)
- Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc()
routines in the local APIC code that the hwpmc(4) driver can use to
manage the local APIC PMC interrupt vector.
- Do not enable the local APIC PMC interrupt vector by default when
HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly
enables the interrupt when it is succesfully initialized and disables
the interrupt when it is unloaded. This avoids enabling the interrupt
on unsupported CPUs which may result in spurious NMIs.
Reported by: rnoland
Reviewed by: jkoshy
Approved by: re (kib)
MFC after: 2 weeks
* Completely remove the option STOP_NMI from the kernel. This option
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Add an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
a device pager (OBJT_DEVICE) object in that it uses fictitious pages to
provide aliases to other memory addresses. The primary difference is that
it uses an sglist(9) to determine the physical addresses for a given offset
into the object instead of invoking the d_mmap() method in a device driver.
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
established, OS shall flush the caches on all processors that may have
used the mapping previously. This operation is not needed if processors
support self-snooping. If not, but clflush instruction is implemented
on the CPU, series of the clflush can be used on the mapping region.
Otherwise, we have to flush the whole cache. The later operation is very
expensive, and AMD-made CPUs do not have self-snooping.
Implement cache flush for remapped region by using clflush for amd64,
when supported by CPU.
Proposed and reviewed by: alc
Approved by: re (kensmith)
amd64 and i386. Essentially, fictitious pages provide a mechanism for
creating aliases for either normal or device-backed pages. Therefore,
pmap_page_set_memattr() on a fictitious page needn't update the direct
map or flush the cache. Such actions are the responsibility of the
"primary" instance of the page or the device driver that "owns" the
physical address. For example, these actions are already performed by
pmap_mapdev().
The device pager needn't restore the memory attributes on a fictitious
page before releasing it. It's now pointless.
Add pmap_page_set_memattr() to the Xen pmap.
Approved by: re (kib)
configuring machine-dependent memory attributes...":
Don't set the memory attribute for a "real" page that is allocated to
a device object in vm_page_alloc(). It is a pointless act, because
the device pager replaces this "real" page with a "fake" page and sets
the memory attribute on that "fake" page.
Eliminate pointless code from pmap_cache_bits() on amd64.
Employ the "Self Snoop" feature supported by some x86 processors to
avoid cache flushes in the pmap.
Approved by: re (kib)
