Refactor the code to put split the MSR values for x86 and arm64
Hyper-V. Code not yet built. This is one of several patches for
the arm64 Hyper-V enablement.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37103
2782ed8f6c fixed the standalone module
build. REmove the now duplicate includes for opt_acpi.h and
opt_platform.h. Als remove the if_mdio.h again in both the Makefile
and the implementation file as it is not (currently) used.
X-MFC with: ba7319e909
MFC after: 70 days
New driver to ACPI generic event device, defined in ACPI spec.
Some ACPI power button may not work without this.
In qemu arm64 with "virt" machine, with ACPI firmware,
enable devd check devd message by
and invoke following command in qemu monitor
(qemu) system_powerdown
and make sure some power button input event appear.
(setting sysctl hw.acpi.power_button_state=S5 is not work,
because ACPI tree does not have \_S5 object.)
Reviewed by: andrew, hrs
Differential Revision: https://reviews.freebsd.org/D37032
This is the second part of the ARM64 Hyper-V enablement.
These changes here are mostly with Make, release changes and also
changes required in vmbus.c hyperv.c and common files in hyperv.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36467
In ARM64 gen2 Hyper-V, use IRQ resource from vmbus_res, which is owning
the IRQ for current device tree. It allows the MMIO resource to be
successfully allocated for vmbus from parent acpi_syscontainer.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37064
This add BUS_GET_DEVICE_PATH interface,
which shows device tree of openfirm/fdt.
In qemu-system-arm64 with "virt" machine with device-tree firmware,
% devctl getpath OFW cpu0
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37031
The emulated UART in the Firecracker VMM (aka the implementation in the
rust-vmm/vm-superio project) includes FIFOs but does not implement the
FCR register, which is used by ns8250_flush to flush the FIFOs.
Check the LSR to see if there is still data in the FIFOs and call
ns8250_drain if necessary.
Discussed with: emaste, imp, jrtc27
Sponsored by: https://patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36979
We assume that bus addresses from busdma are the same thing as
"physical" addresses in the Virtio specification; this seems to
be true for the platforms on which Virtio is currently supported.
For block devices which are limited to a single data segment per
I/O, we request PAGE_SIZE alignment from busdma; this is necessary
in order to support unaligned I/Os from userland, which may cross
a boundary between two non-physically-contiguous pages. On devices
which support more data segments per I/O, we retain the existing
behaviour of limiting I/Os to (max data segs - 1) * PAGE_SIZE.
Reviewed by: bryanv
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36667
Most virtio_blk requests are launched from vtblk_startio; prior to this
commit, if vtblk_request_execute failed (e.g. due to a lack of space on
the virtio queue) vtblk_startio would requeue the request to be
reattempted later.
Add a flag "vbr_requeue_on_error" to requests and perform the requeuing
from inside vtblk_request_execute instead.
No functional change intended.
Reviewed by: bryanv, imp
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36665
The error, if any, now gets stashed in the request structure. (Step 1
of reworking this driver to use busdma.)
No functional change intended.
Reviewed by: bryanv, imp
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36664
The Virtio MMIO bus driver was added in 2014 with support for devices
exposed via FDT; in 2018 support was added to discover Virtio MMIO
devices via ACPI tables, as in QEMU. The Firecracker VMM eschews both
FDT and ACPI, instead presenting device information via kernel command
line arguments of the form virtio_mmio.device=<parameters>.
These command line parameters get converted into kernel environment
variables; this adds support for parsing those variables and attaching
virtio_mmio children to nexus.
There is a case to be made that it would be cleaner to have a new
"cmdlinebus" attached to nexus and virtio_mmio children attached to
that. A future commit might do that.
Discussed with: imp, jrtc27
Sponsored by: https://patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36189
Issue Description:
The RequestCredits field of IOCFacts got changed between the Phase23
firmware to Phase24 firmware. So as part of firmware update operation,
driver has to free the resources & pools which are created with the Phase23
Firmware's IOCFacts data (i.e. during driver load time) and has to
reallocate the resources and pools using Phase24's IOCFacts data. Here
driver has freed the interrupts but missed to reallocate the interrupts and
hence config page read operation is getting timed out and controller is
going for recursive reinit (controller reset) operations and leading to
kernel panic.
Fix:
Reallocate the interrupts if the interrupts are disabled as part of
firmware update/downgrade operation.
Submitted by: Sreekanth Ready <sreekanth.reddy@broadcom.com>
Tested by: ken
MFC after: 3 days
DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.
The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.
Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:
acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX
dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.
The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.
Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638
It can be static within uart_tty.c. It is an open question whether there
remains any real benefit to having uart instances share a swi thread.
Reviewed by: imp, markj, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36938
When a transaction is on the outstanding list, it needs to have a valid
timeout value, so set it to infinity before placing it on the
list. Place before we put it on the list, even though the list is
protected by the qpair lock.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D36920
Adapt 2796f7cab1 to igc(4)
* Don't reset the entire adapter for vlan changes, fix up the problems
* Remove the VFTA, this hardware doesn't seem to implement it
Approved by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31979
Like many of the other encodings here, none of these are actually used
by our tables. However, defining the EVENT_xH names allows them to be
used by the user (e.g. when trying to use an implementation-defined
event that they know about from their core's documentation but we don't)
and allows us to define PMC_EV_ARMV8_LAST appropriately.
Some of these are also used downstream in CheriBSD on Morello.
Reviewed by: andrew, tsoome
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D36926
The documented encoding space for Armv8 was only 8 bits, but v8.0 has
always had a 10-bit encoding space for its events, and downstream in
CheriBSD we relied on this full space. This worked until the DMC-620 and
CMN-600 events were added, trampling on what should have been reserved
for Armv8.0 right from the start. Thus, renumber the DMC-620 and CMN-600
events to not do this before they make it into a stable release,
allowing for the full Armv8.0 encoding space to be used without having
to split it across two different regions.
Note that Armv8.1 grows the encoding space to 16 bits, which doesn't fit
well with our current approach. No attempt is made to allow for these
events in this change, only the ones that have always been valid (according to
the hardware) from the first commit of Armv8 support to hwpmc.
Reviewed by: arichardson, tsoome
Differential Revision: https://reviews.freebsd.org/D36925
Buggy SMM implementations can hang while processing CPPC notifications.
This leads to some laptops (notably Thinkpads) hanging when the
hwpstate_intel driver is loaded.
Tell the SMM that we will handle CPPC notifications as described in:
- Intel® Processor Vendor-Specific ACPI
- Intel® 64 and IA-32 Architectures Software Developer’s Manual
CPPC events default to masked (disabled) so while we do not do any
handling right now this does not seem to lead to any issues.
This approach was found via this Linux Kernel patch:
https://lkml.org/lkml/2016/3/17/563
PR: 253288
Reviewed by: imp, jhb
Sponsored by: Modirum
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D36699
I225 devices have only one PHY vendor. There is unnecessary to check
_I_PHY_ID during the link establishment and auto-negotiation process,
the checking also caused devices like i225-IT failed. This patch is to
remove the mentioned unnecessary checking.
Cc: stable@dpdk.org
Signed-off-by: Mah Yock Gen <yock.gen.mah@intel.com>
Signed-off-by: Taripin Samuel <samuel.taripin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Approved by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36923
This will resolve a reference and return the appropriate handle, a node
on the simplebus or an ACPI_HANDLE for ACPI. For now we do not try to
further abstract the return type.
MFC after: 2 weeks
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D36793
In virtual machines with virtual UARTs which have fictitious baud
rates, it may be possible to drain the receive queue very quickly,
without needing to DELAY after each character. Attempt to read
(and discard) the receive queue as fast as possible, stopping for
a DELAY only when LSR_RXRDY is no longer asserted; assume that we
have finished draining the queue when LSR_RXRDY is asserted both
before and after a DELAY.
This speeds up the boot process in FreeBSD/Firecracker by 27 ms.
Reviewed by: imp, jrtc27
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36184
Mechanically cleanup INP_TIMEWAIT from the kernel sources. After
0d7445193a, this commit shall not cause any functional changes.
Note: this flag was very often checked together with INP_DROPPED.
If we modify in_pcblookup*() not to return INP_DROPPED pcbs, we
will be able to remove most of this checks and turn them to
assertions. Some of them can be turned into assertions right now,
but that should be carefully done on a case by case basis.
Differential revision: https://reviews.freebsd.org/D36400
This was added in 7cba15b16e in 2016 and firmwares at that time were
already setting up the iSCSI tag mask properly. Since then it has also
become possible to split the iSCSI region between multiple PCIE PFs but
the driver's calculation takes only its own PF's allocation into account
and that means this code is incorrect and not just a harmless no-op.
MFC after: 1 week
Sponsored by: Chelsio Communications
By default all VMD devices remap children MSI/MSI-X interrupts into their
own. It creates additional isolation, but also complicates things due to
sharing, etc. Fortunately some VMD devices can bypass the remapping.
Add tunable to control it for remap testing or if something go wrong.
MFC after: 2 weeks
The "uart_bus_probe" function is used as a generic part of uart probe
logic. It returns a driver priority(negative number) if successful and
an error code otherwise.
Fix the error checking condition to account for that.
Also, while here return "BUS_PROBE_VENDOR", instead of "0".
This fixes uart on clearfog pro with recent DT.
PR: 266657
Reviewed by: mw
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36880
