amd64 and 32-bit ARM already had assertions to this effect. Add them to
other pmaps.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
(cherry picked from commit b092c58c00)
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
(cherry picked from commit 720dc6bcb5)
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
(cherry picked from commit 5d2d599d3f)
Adds OPAL_CONSOLE_WRITE error handling and implements a call to
OPAL_CONSOLE_WRITE_BUFFER_SPACE to verify if there's enough space
before writing to console.
This fixes serial port output getting corrupted on fast writes, like
on "dmesg" output.
Tested on Raptor Blackbird running powerpc64 BE kernel
Reviewed by: luporl
Sponsored by: Eldorado Reserach Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29063
(cherry picked from commit b8bc6b7954)
Implements bus_map_resource and bus_unmap_resource DEVMETHODs to be
used by powerpc targets. This is identical to the amd64 code.
Required by virtio-modern.
Reviewed by: bryanv
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28012
(cherry picked from commit befb0817bd)
Radix MMU code was missing TLB invalidations when some Level 3 PDEs were
modified. This caused TLB multi-hit machine check interrupts when
superpages were enabled.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29511
(cherry picked from commit 28d14569c8)
PowerISA 2.07B says that the low-order p-12 bits of the real page number
contained in ARPN and LP fields of a PTE must be 0s and are ignored
by the hardware (Book III-S, 5.7.7.1), where 2^p is the actual page size
in bytes, but we were clearing only the LP field.
This worked on bare metal and QEMU with KVM, that ignore these bits,
but caused a kernel panic on QEMU with TCG, that expects them to be
cleared.
This fixes running FreeBSD with HPT superpages enabled on QEMU
with TCG.
Sponsored by: Eldorado Research Institute (eldorado.org.br)
(cherry picked from commit 3d0399c718)
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
(cherry picked from commit 7446b0888d)
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
(cherry picked from commit 9d81dd5404)
This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
(cherry picked from commit 763107f26c)
This only works on single-CPU G4 systems, and more work is needed for
dual-CPU systems. That said, platform sleep does not work, and this is
currently only used for PMU-based CPU speed change.
The elimination of the platform_smp_timebase_sync() call is so that the
timebase sync rendezvous can be enhanced to perform better
synchronization, which requires a full rendezvous. This would be
impossible to do on this single-threaded run.
(cherry picked from commit 921716186f)
Rename cpu_sleep() to mpc745x_sleep() to denote what it's actually
intended for. This function is very G4-specific, and will not work on
any other CPU. This will afterward eliminate a
platform_smp_timebase_sync() call by directly updating the timebase
instead.
(cherry picked from commit b6d8f3b517)
types.h defines device_t as a typedef of struct device *. struct device
is defined in subr_bus.c and almost all of the kernel uses device_t.
The LinuxKPI also defines a struct device, so type confusion can occur.
This causes bugs and ambiguity for debugging tools. Rename the FreeBSD
struct device to struct _device.
Reviewed by: gbe (man pages)
Reviewed by: rpokala, imp, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29676
(cherry picked from commit dfff37765c)
ULE uses this topology to try and preserve locality when migrating
threads between CPUs and when performing work stealing. Ensure that on
NUMA systems it will at least take the NUMA topology into account.
Reviewed by: bdragon, jhibbits (previous version)
Tested by: bdragon
Differential Revision: https://reviews.freebsd.org/D28580
(cherry picked from commit cb5f8694a5)
At this point in startup, vm_ndomains has not been initialized. Switch
to checking kenv instead.
Fixes incorrect NUMA information being set on multi-domain systems like
Talos II.
Submitted by: jhibbits
(cherry picked from commit bd94c8ab29)
ipi_msg_count is inaccessible outside this file and is never read.
It was introduced in the original SMP support code in r178628 and was never
actually used anywhere.
Remove it to slightly improve IPI performance.
Submitted by: jhibbits
(cherry picked from commit 74f6cb0f31)
Now that superpages for HPT MMU has landed, finish implementation of
pmap_mincore by adding support for superpages.
Submitted by: Fernando Eckhardt Valle <fernando.valle@eldorado.org.br>
Reviewed by: bdragon, luporl
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29230
(cherry picked from commit 75e67b4920)
In uart_phyp_get(), when the internal buffer is empty, we make a
hypercall to retrieve up to 16 bytes of input data from the
hypervisor. As this is specified to be returned in BE format, we need
to do a 64-bit byte swap on the first and second half of the data.
If the buffer being passed in was insufficient to return the fetched
data, we store the remainder in the internal buffer and use it to
satisfy the following calls to uart_phyp_get() until it is drained.
However, in this case, we were accidentally byteswapping the internal
buffer again.
Move the byteswapping code to just after the hypercall so it only gets
swapped when we're filling the buffer.
Fixes arrow keys in qemu on pseries, among other console oddities.
Sponsored by: Tag1 Consulting, Inc.
(cherry picked from commit 5001c579ba)
In 78599c32ef, CFI endproc decoration was
added to locore64.S. However, it missed the subtle detail that
__restartkernel_virtual() falls through to __restartkernel(). This was
causing boot failure on PowerMac G5, as it tried to execute the
epilogue as code.
Fix this by branching to __restartkernel() instead of intentionally
running off the end of the function.
While here, add some additional notes on how the virtual mode restart
works.
(cherry picked from commit d26f2a50ff)
lang/rust needs COMPAT_FREEBSD11 to build, even though powerpc64le itself is supported only since 13.0.
I also corrected a comment, because if we ever have lib32 for powerpc64le, it will be for powerpcle.
Reviewed by: bdragon (on IRC)
(cherry picked from commit 8b804ee616)
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
Support for powerpc64le appeared in 13, so there's no point to enable COMPAT_* for older releases.
Also disable COMPAT_FREEBSD32, since there's no powerpcle. Since that may change in the future, leave the option commented out.
Approved by: bdragon, jhibbits (on IRC)
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
It's possible for a context switch, and CPU migration, to occur between
fetching the PCPU context and extracting the pc_curpcb. This can cause
the fault handler to be installed for the wrong thread, leading to a
panic in copyin()/copyout(). Since curthread is already in %r13, just
use that directly, as GPRs are migrated, so there is no migration race
risk.
Currently copyinstr() uses fubyte() to read each byte from userspace.
However, this means that for each byte, it calls pmap_map_user_ptr() to
map the string into memory. This is needlessly wasteful, since the
string will rarely ever cross a segment boundary. Instead, map a
segment at a time, and copy as much from that segment as possible at a
time.
Measured with the HPT pmap on powerpc64, this saves roughly 8% time on
buildkernel, and 5% on buildworld, in wallclock time.
- fix values returned by 'sysctls dev.opal_sensor.*.sensor'
- fix missing 'dev.opal_sensor.*.sensor_[max|min]' on sysctl
Reviewed-by: jhibbits
Sponsored-by: Eldorado Research Institute (eldorado.org.br)
Differential-Revision: https://reviews.freebsd.org/D27365
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
In the PCB struct, we need to match the VSX register file layout
correctly, as the VSRs shadow the FPRs.
In LE, we need to have a dword of padding before the fprs so they end up
on the correct side, as the struct may be manipulated by either the FP
routines or the VSX routines.
Additionally, when saving and restoring fprs, we need to explicitly target
the fpr union member so it gets offset correctly on LE.
Fixes weirdness with FP registers in VSX-using programs (A FPR that was
saved by the FP routines but restored by the VSX routines was becoming 0
due to being loaded to the wrong side of the VSR.)
Original patch by jhibbits.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D27431
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
It can useful for code outside the VM system to look up the NUMA domain
of a page backing a virtual or physical address, specifically when
creating NUMA-aware data structures. We have _vm_phys_domain() for
this, but the leading underscore implies that it's an internal function,
and vm_phys.h has dependencies on a number of other headers.
Rename vm_phys_domain() to vm_page_domain(), and _vm_phys_domain() to
vm_phys_domain(). Make the latter an inline function.
Add _vm_phys.h and define struct vm_phys_seg there so that it's easier
to use in other headers. Include it from vm_page.h so that
vm_page_domain() can be defined there.
Include machine/vmparam.h from _vm_phys.h since it depends directly on
some constants defined there.
Reviewed by: alc
Reviewed by: dougm, kib (earlier versions)
Differential Revision: https://reviews.freebsd.org/D27207
r367416 should have called save_fpu() before kern_sigprocmask to avoid
race condition
Thanks jhibbits and bdragon for pointing it out
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27241
After r367417, both mmu_oea64 and mmu_radix were defining the vm.pmap
sysctl node, resulting in the later definition hiding the properties of
the previous one. Avoid this issue by defining vm.pmap in a common
source file and declaring it where needed.
This change also standardizes the tunable name used to enable superpages
and change its default to disabled on radix MMU, because it still has some
issues with superpages.
Reviewed by: bdragon, jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27156
There were many, many endianness fixes needed for Radix MMU. The Radix
pagetable is stored in BE (as it is read and written to by the MMU hw),
so we need to convert back and forth every time we interact with it when
running in LE.
With these changes, I can successfully boot with radix enabled on POWER9 hw.
Reviewed by: luporl, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D27181
The HPT is always stored in big-endian, as it is accessed directly by the
hardware as well as the kernel. As such, it is necessary to convert values
to and from native endian when running on LE.
Some unconverted accesses snuck in accidentally with r367417.
Apply the appropriate conversions to fix boot hanging on powerpc64le.
Sponsored by: Tag1 Consulting, Inc.
