Due to memfd_create(3)'s construction of a path to pass to shm_open2(2),
it has a much larger than typical dependency footprint for a system
call wrapper (the list currently includes calloc, memset, sprintf, and
strlen). As such, split it off into its own file under libc/gen to
lighten libc/sys's dependency list.
Reviewed by: kevans, imp, emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D42709
(cherry picked from commit c3207e2d2554c8e36f9cf5950f8cd52a19fedfd5)
All supported architectures have shared page support so remove this
unused stub.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D42619
(cherry picked from commit 500bf0592cf1de1d26369efe3877d812f724f5c0)
All architectures necessarily implement _exit(2) and vfork(2) so
declare them in sys/Symbol.map.
Reviewed by: imp, kib, emaste
Differential Revision: https://reviews.freebsd.org/D42614
(cherry picked from commit e4a1800f06884dc00931f55d0fa8cd9ce473a83e)
These were left over from $FreeBSD$ removal.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D42612
(cherry picked from commit 1ca63a8219b88b752b064d19bd3428c61dbcf1f9)
These sys/cdefs.h are not needed. Purge them. They are mostly left-over
from the $FreeBSD$ removal. A few in libc are still required for macros
that cdefs.h defines. Keep those.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D42385
(cherry picked from commit 559a218c9b257775fb249b67945fe4a05b7a6b9f)
The man page had `kern.ktrace.geniosize` but the sysctl node contains an
underscore.
PR: 274274
Reported by: Ivan Rozhuk
Sponsored by: The FreeBSD Foundation
(cherry picked from commit a572dfa1bfe00cec93b27d8848ca49562cab5e3c)
As a note, parts of manual pages getdirentries(2) and dir(5) should
probably be consolidated.
MFC after: 3 days
(cherry picked from commit 5b7a776f481891f10820a0b4838d0e0feb60b8ad)
Move the timerfd impelemntation from linux compat code to sys/kern. Use
it to implement the new system calls for timerfd. Add a hook to kern_tc
to allow timerfd to know when the system time has stepped. Add kqueue
support to timerfd. Adjust a few names to be less Linux centric.
RelNotes: YES
Reviewed by: markj (on irc), imp, kib (with reservations), jhb (slack)
Differential Revision: https://reviews.freebsd.org/D38459
This is an attempt at clean-room implementation of the Linux'
membarrier(2) syscall. For documentation, you would need to read
both membarrier(2) Linux man page, the comments in Linux
kernel/sched/membarrier.c implementation and possibly look at
actual uses.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32360
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
As documented in listen.2 manual page, the kernel emits a LOG_DEBUG
syslog message if a socket listen queue overflows. For some appliances,
it may be desirable to change the priority to some higher value
like LOG_INFO while keeping other debugging suppressed.
OTOH there are cases when such overflows are normal and expected.
Then it may be desirable to suppress overflow logging altogether,
so that dmesg buffer is not flooded over long run.
In addition to existing sysctl kern.ipc.sooverinterval,
introduce new sysctl kern.ipc.sooverprio that defaults to 7 (LOG_DEBUG)
to preserve current behavior. It may be changed to any value
in a range of 0..7 for corresponding priority or to -1 to suppress logging.
Document it in the listen.2 manual page.
MFC after: 1 month
For a process supervisor using the reaper API to track process subtrees,
it is very useful to know the state of the processes on the list.
Sponsored by: https://www.patreon.com/valpackett
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39585
by making it accept some open(2) flags. More precisely, only
O_CLOEXEC is supported, the flag is translated into the KQUEUE_CLOEXEC flag
for kqueuex(2), and O_NONBLOCK is silently ignored.
Reported and tested by: vishwin
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D39377
There is no real need to close descriptors before a process exits, but
these close calls demonstrate by example that kqueue descriptors occupy
the same namespace as other file descriptors.
Reviewed by: fernape, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39376
There are FAT12 and FAT16 file systems, but FAT13 of was an
unintentional invention of mine ...
Reported by: Ravi Pokala <rpokala@freebsd.org>
MFC after: 1 month
This update implements tallying of free directory entries during
create, delete, or rename operations on FAT12 and FAT16 file systems.
Prior to this change, the total number of root directory entries
was reported as number of inodes, but 0 as the number of free
inodes, causing system health monitoring software to warn about
a suspected disk full issue.
The FAT12 and FAT16 file systems provide a limited number of
root directory entries, e.g. 512 on typical hard disk formats.
The valid range of values is 1 to 65535, but the msdosfs code
will effectively round up "odd" values to the next multiple of 16
(e.g. 513 would allow for 528 root directory entries).
This update implements tracking of directory entries during create,
delete, or rename operations, with initial values determined by
scanning the directory when the file system is mounted.
Total and free directory entries are reported in the f_files and
f_ffree elements of struct statfs, despite differences in semantics
of these values:
- There is no limit on the number of files and directories that can
be created on a FAT file system. Only the root directory of FAT12
and FAT16 file systems is limited, any number of files can still be
created in sub-directories, even when 0 free "inodes" are reported.
- A single file can require 1 to 21 directory entries, depending on
the character set, structure, and length of the name. The DOS 8.3
style file name takes up 1 entry, and if the name does not comply
with the syntax of a DOS 8.3 file name, 1 additional entry is used
for each 13 characters of the file name. Since all these entries
have to be contiguous, it is possible that a file or directory with
a long name can not be created, despite a sufficient total number of
free directory entries.
- Renaming a file can require more directory entries than currently
allocated to store its long name, which may prevent an in-place
update of the name if more entries are needed. This may cause a
rename operation to fail if no contiguous range of free entries for
the new name can be found.
- The volume label is stored in a directory entry. An empty FAT file
system with a volume label will therefore show 1 used "inode" in
df.
- The perceentage of free inodes shown in df or monitoring tools does
only represent the state of the root directory of a FAT12 or FAT16
file system. Neither does a reported value of 0% free inodes does
prevent files from being created in sub-directories, nor does a
value of 50% free inodes guarantee that even a single file with
a "long" name can be created in the root directory (if every other
directory entry is occupied and there are no 2 contiguous entries).
The statfs(2) and df(1) man pages have been updated with a notice
regarding the possibly different semantics of values reported as
total and free inodes for non-Unix file systems.
PR: 270053
Reported by: Ben Woods <woodsb02@freebsd.org>
Approved by: mckusick
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D38987
- This function no longer disables interrupts
- MLINK to reboot.9
- The mentions of autoconfiguration is more about shutdown_nice(),
coming in the next commit.
- Describe the RB_* flags relevant to this function
- Describe behaviour when shutdown hooks fail the reset
- Describe expected execution contexts
- Add FF copyright
- xref panic(9)
- xref this page in reboot(2)
Reviewed by: markj
Discussed with: rpokala, Pau Amma <pauamma@gundo.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39133
Summary:
All cap_* system calls would fail when capability mode support is
not present.
MFC after: 2 weeks
Reviewed by: emaste, pauamma
Differential Revision: https://reviews.freebsd.org/D38976
The behavior is the same as in capability mode, it does not actually
return EINVAL for absolute lookups:
openat(AT_FDCWD,"/tmp/test",O_RDONLY|O_DIRECTORY,00) = 3 (0x3)
openat(3,"../../",O_RDONLY|0x800000,00) ERR#93 'Capabilities insufficient'
openat(3,"/etc/passwd",O_RDONLY|0x800000,00) ERR#93 'Capabilities insufficient'
Fixes: 1f305be43 ("Document {O,AT}_RESOLVE_BENEATH...")
Reviewed by: kib, pauamma (manpages), emaste
Sponsored by: https://www.patreon.com/valpackett
Pull Request: https://github.com/freebsd/freebsd-src/pull/680
Differential Revision: https://reviews.freebsd.org/D38675
profil(II) is in the scanned 3rd edition manual that we have. We don't
have the 3rd edition sources, nor do we have the 4th edition souces. We
have a mostly complete (missing pipes) 4th edition C rewrite where
profil system call number is reserved, but it's not implemented (it's in
the manx section for things that apeared to have been in 3rd edition but
weren't yet part of the reimplemented 4th edition). The 5th edition
sources we have do have it, however. For other items that have appeared
in earlier manuals, we've added the simple verbage to the manual and
relegated the rest of the data for that file to the commit message.
Simplify the tests for 32-bit arm soft float support. For the files
included only on arm, drop the test entirely. For others, test
MACHINE_CPUARCH against arm.
No functional change intended. File lists appear the same before / after
the change.
Sponsored by: Netflix
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D38582
While here, move notes about FreeBSD-specific functionality to the
COMPATIBILITY section, and document the ECAPMODE error for shm_open().
Reviewed by: pauamma, kib
MFC after: 2 weeks
Sponsored by: Klara, Inc.
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38282
Under Linux to sched_[g|s]etaffinity() functions the value returned from a call
to gettid(2) (thread id) can be passed in the argument pid. Specifying pid as 0
will set the attribute for the calling thread, and passing the value returned
from a call to getpid(2) (process id) will set the attribute for the main thread
of the thread group.
Native cpuset(2) family of system calls has "which" argument to determine how
the value of id argument is interpreted, i.e., CPU_WHICH_TID is used to pass
a thread id and CPU_WHICH_PID - to pass a process id.
For now native sched_[g|s]etaffinity() implementation is wrong as uses "which"
CPU_WHICH_PID to pass both (process and thread id) to the kernel. To fix this
adding a new "which" CPU_WHICH_TIDPID intended to handle both id's.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D38209
MFC after: 1 week
