OpenSSL 3.0.12 addresses:
* Fix incorrect key and IV resizing issues when calling
EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2()
with OSSL_PARAM parameters that alter the key or IV length
([CVE-2023-5363]).
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
(cherry picked from commit ad991e4c142ebabad7aef488ad97b189ecabb270)
(cherry picked from commit 575878a533823aa3e5bab715928d9cdffbc4dcbc)
It may be needed when it's updated so is best to keep in sync with the
assembly files.
Reviewed by: emaste
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41938
(cherry picked from commit c97a82d4a4a0288ed2a456f4ce41d57483724f17)
OpenSSL 3.0.11 addresses:
POLY1305 MAC implementation corrupts XMM registers on Windows (CVE-2023-4807)
Relnotes: Yes
Pull request: https://github.com/freebsd/freebsd-src/pull/852
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 6f1af0d7d2af54b339b5212434cd6d4fda628d80)
When importing OpenSSL 3 in base, some but not all source files
implementing the deprecated 0.9.8 API were imported. With this change,
it becomes possible again to compile software targeting this API.
PR: 272220
Fixes: b077aed33b ("Merge OpenSSL 3.0.9")
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/851
(cherry picked from commit b15b39521644ebffdcc091bd283ed410b0ae9274)
This corrects the list of source files required for the FIPS provider.
To test:
```
INSTALL PASSED
enter AES-128-CBC encryption password:
Verifying - enter AES-128-CBC encryption password:
U2FsdGVkX1+MGm7LbZou29UWU+KAyBX/PxF5T1pO9VM=
```
Reviewed by: emaste
Fixes: b077aed33b ("Merge OpenSSL 3.0.9")
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/837
Differential Revision: https://reviews.freebsd.org/D41720
(cherry picked from commit 8f37b3a142f2f7197896cd283c44c7e4fb64aaf3)
OpenSSL's legacy provider module and engines need to link to
libcrypto.so, as it provides some of the actual implementations of
legacy routines.
This is a little tricky due to build order issues. Introduce a small
hack (LIBCRYPTO_WITHOUT_SUBDIRS) that builds libcrypto.so in its usual
early phase without any OpenSSL provider modules or engines. This is
intended to restore the test suite; a future change should remove the
hack and replace it with a better approach.
PR: 254853, 273528
Discussed with: Folks at EuroBSDCon in Coimbra
Sponsored by: The FreeBSD Foundation
(cherry picked from commit 1a18383a52bc373e316d224cef1298debf6f7e25)
These targets generate all the assembly files in sys/crypto/openssl.
Reviewed by: markj, emaste (earlier version)
Differential Revision: https://reviews.freebsd.org/D41590
(cherry picked from commit 73653b72af65e294dcfedc43a8ea09b2137d72ed)
Currently Makefile.asm relies on the current buildenv to set CFLAGS
for i386. The current approach also leaves various temporary *.s
files around in the current directory. To make this a bit better:
- Instead of using CFLAGS from buildenv for i386, define the actual
flags the perl scripts need: -DOPENSSL_IA32_SSE2 to enable SSE2.
- Change i386 to have the perl scripts write to /dev/stdout to avoid
creating temporaries. Previously i386 was generating the temporary
files in the OpenSSL contrib src.
- Cleanup temporary *.s files in the all target after generating the
real *.S files for architectures which need them.
- Remove a duplicate rule for aes-armv4.S.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D41589
(cherry picked from commit c0fe6b9d7506d6ce6f9ec3688ee0cc5656a8707e)
The :R:S expressions removed the .pl extension only to add it back
again, so just trim them to using :T alone.
Reviewed by: Pierre Pronchery <pierre@freebsdfoundation.org>, markj, emaste
Differential Revision: https://reviews.freebsd.org/D41588
(cherry picked from commit 7406b6f9761c35eb53f91f54d1a687d96d638907)
Summary:
- Six (6) new roots
- Four (4) distrusted roots
Note that this was intentionally generated with OpenSSL 1.1.1 to avoid
mixing updates and non-functional changes -- there will be some churn
with OpenSSL 3. The next commit will update the current batch of
trusted certs with the format OpenSSL 3 produces, which I've tested
against OpenSSL 1.1.1 to be sure that that doesn't hurt us in older
branches.
Approved by: re (kib)
(cherry picked from commit 65fd80909e196c8be2ce5e948775e9cbda2ef069)
An update is imminent; drop these now to make it easier to audit the
results.
Approved by: re (kib)
(cherry picked from commit 3f84d4b0fe1445bca5f3b6a70fc5641b88c31217)
With this change, we'll drop the "with $FreeBSD$" lines from trusted/
certs in the next update. untrusted/ will need to be done manually, but
I'll likely just do them all manually, commit, then run the script and
commit any legitimate updates after confirming the output matches what
I did manually.
Reported by: imp
Reviewed by: imp
Approved by: re (kib)
(cherry picked from commit bbc8585ef557be36b3fda75e3a41d725aedb1c1e)
Notably, define AES_ASM which is required for any AES acceleration
(OpenSSL 1.0 gated all AES acceleration on OPENSSL_CPUID_OBJ instead).
Enabling this exposed that new assembly files added in OpenSSL 3.0
needed to be included in the build (aes-x86-64.S and aes-586.S). Both
of these files supplant both aes_core.c and aes_cbc.c. The last file
had to be moved out of the MI SRCS line for aes and into each ASM_*
for non-x86.
As part of this I audited the generated configdata.pm for amd64, i386,
and aarch64 and found the following additional discrepecancies that are
fixed here as well:
- Enabled BSAES_ASM on amd64 which requires bsase-x86_64.S
- Enabled WHIRLPOOL_ASM on amd64 (asm sources already built)
- Enabled CMLL_ASM on amd64 and i386 (asm sources already built)
aarch64 had no discreprecancies in configdata.pm, and no *.pl asm
generators were missing for aarch64 in Makefile.asm. I did not check
powerpc or armv7, but for armv7 all of the asm generators seem to be
present in Makefile.asm.
Reported by: gallatin (AES-GCM using plain software on amd64)
Reviewed by: gallatin, ngie, emaste
Differential Revision: https://reviews.freebsd.org/D41539
This only affects amd64 and i386, but in particular includes wrappers
for AES encryption/decryption that gate all of the accelerated AES.
Reviewed by: gallatin, ngie, emaste
Differential Revision: https://reviews.freebsd.org/D41537
It provides the RSA_generate_key function, which is deprecated as of
3.0 but is used by various ports.
Reviewed by: kbowling
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41506
It provides the ERR_load_*_strings routines, which are deprecated as of
3.0 but are used by various ports.
PR: 272580
Reviewed by: kbowling
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41505
This splits out the certctl utility into a new certctl package and the
openssl libs into an openssl-lib package.
PR: 272816
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41321
The fips.so provider module exposing FIPS-validated algorithms was still
missing a number of symbols.
PR: 272454
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41018
These functions are new, and some ports (e.g.opensc) expect to have them
available. Add the file they're defined in to the build, and add them
to Version.map.
PR: 270076
Reviewed by: markj, emaste, pierre
Fixes: b077aed33b ("Merge OpenSSL 3.0.9")
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D40914
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. This
change makes sure the FIPS module matches build instructions used for
libcrypto.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. This
change adds mandatory source files to every provider.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. One
such provider, "fips", ships with OpenSSL 3 directly, and groups
algorithms that can be FIPS 140-2 validated.
The import of OpenSSL 3.0.9 was building this provider incorrectly,
missing symbols required for proper operation.
In addition, without the change in OpenSSL's crypto/bn/bn_const.c, the
FIPS module fails loading: `Undefined symbol "ossl_bignum_modp_1536_p"`.
This change is consistent with crypto/bn/bn_dh.c though.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. One
such provider, "legacy", ships with OpenSSL 3 directly, and groups
obsoleted algorithms that can still optionally be used anyway.
The import of OpenSSL 3.0.9 was building this provider incorrectly,
missing symbols required for proper operation.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
They break the !amd64 builds due to an underspecified include path and
will be re-applied once that's fixed.
Reported by: Ronald Klop <ronald-lists@klop.ws>
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. This
change makes sure the FIPS module matches build instructions used for
libcrypto.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. This
change adds mandatory source files to every provider.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. One
such provider, "fips", ships with OpenSSL 3 directly, and groups
algorithms that can be FIPS 140-2 validated.
The import of OpenSSL 3.0.9 was building this provider incorrectly,
missing symbols required for proper operation.
In addition, without the change in OpenSSL's crypto/bn/bn_const.c, the
FIPS module fails loading: `Undefined symbol "ossl_bignum_modp_1536_p"`.
This change is consistent with crypto/bn/bn_dh.c though.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
OpenSSL 3 supports a modular architecture, allowing different providers
to bring specific implementations of cryptographical algorithms. One
such provider, "legacy", ships with OpenSSL 3 directly, and groups
obsoleted algorithms that can still optionally be used anyway.
The import of OpenSSL 3.0.9 was building this provider incorrectly,
missing symbols required for proper operation.
Sponsored by: The FreeBSD Foundation
Pull Request: https://github.com/freebsd/freebsd-src/pull/787
libcrypto intends to provide these routines on little-endian 64-bit
targets. This was previously done by including them in the ASM_aarch64
and ASM_amd64 blocks in the Makefile, but this excluded powerpc64le and
riscv64.
Reported by: ci.freebsd.org
Reviewed by: jrtc27
Fixes: b077aed33b ("Merge OpenSSL 3.0.9")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40749
The following methods have existed since 1.0.2, however, they are
deprecated and are not available on all architectures.
- EC_GFp_nistp224_method
- EC_GFp_nistp256_method
- EC_GFp_nistp521_method
Do not expose them via libcrypto.
Discussed with: emaste
Migrate to OpenSSL 3.0 in advance of FreeBSD 14.0. OpenSSL 1.1.1 (the
version we were previously using) will be EOL as of 2023-09-11.
Most of the base system has already been updated for a seamless switch
to OpenSSL 3.0. For many components we've added
`-DOPENSSL_API_COMPAT=0x10100000L` to CFLAGS to specify the API version,
which avoids deprecation warnings from OpenSSL 3.0. Changes have also
been made to avoid OpenSSL APIs that were already deprecated in OpenSSL
1.1.1. The process of updating to contemporary APIs can continue after
this merge.
Additional changes are still required for libarchive and Kerberos-
related libraries or tools; workarounds will immediately follow this
commit. Fixes are in progress in the upstream projects and will be
incorporated when those are next updated.
There are some performance regressions in benchmarks (certain tests in
`openssl speed`) and in some OpenSSL consumers in ports (e.g. haproxy).
Investigation will continue for these.
Netflix's testing showed no functional regression and a rather small,
albeit statistically significant, increase in CPU consumption with
OpenSSL 3.0.
Thanks to ngie@ and des@ for updating base system components, to
antoine@ and bofh@ for ports exp-runs and port fixes/workarounds, and to
Netflix and everyone who tested prior to commit or contributed to this
update in other ways.
PR: 271615
PR: 271656 [exp-run]
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):
This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.
Sponsored by: The FreeBSD Foundation
Release notes are available at https://www.openssh.com/txt/release-9.2
OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.
Some other notable items from the release notes:
* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.
* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.
* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.
* sshd(8): add a -V (version) option to sshd like the ssh client has.
* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.
* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976
* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
