During recent testing related to the IETF NFSv4 Bakeathon, it was
discovered that Kerberized NFSv4.1/4.2 mounts to pNFS servers
(sec=krb5[ip],pnfs mount options) was broken.
The FreeBSD client was using the "service principal" for
the MDS to try and establish a rpcsec_gss credential for a DS,
which is incorrect. (A "service principal" looks like
"nfs@<fqdn-of-server>" and the <fqdn-of-server> for the DS is not
the same as the MDS for most pNFS servers.)
To fix this, the rpcsec_gss code needs to be able to do a
reverse DNS lookup of the DS's IP address. A new kgssapi upcall
to the gssd(8) daemon is added by this patch to do the reverse DNS
along with a new rpcsec_gss function to generate the "service
principal".
A separate patch to the gssd(8) will be committed, so that this
patch will fix the problem. Without the gssd(8) patch, the new
upcall fails and current/incorrect behaviour remains.
This bug only affects the rare case of a Kerberized (sec=krb5[ip],pnfs)
mount using pNFS.
This patch changes the internal KAPI between the kgssapi and
nfscl modules, but since I did a version bump a few days ago,
I will not do one this time.
(cherry picked from commit dd7d42a1fae5a4879b62689a165238082421f343)
As of LLVM 16, -fsanitize-memory-param-retval is the default. It yields
significantly smaller code, but the KMSAN runtime interceptors need to
be updated to stop checking shadow state of parameters. Apply a minimal
workaround for now.
MFC after: 3 days
Sponsored by: Klara, Inc.
Sponsored by: Juniper Networks, Inc.
(cherry picked from commit b6c653c9746342b373af01979319b3cb123b2872)
This is a simple RTC driver for the rv3032 from Microcrystal.
Just the basic functionality is implemented (no timer, alarm etc ..).
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41995
(cherry picked from commit 1d6a6a524409662992ca96bc91ae69b2a2a5ff35)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41913
(cherry picked from commit 7c569caa0a6fffa7e1cc0a7f61e986dbc7c59074)
It lives in the gpio subdirectory
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41912
(cherry picked from commit 918a10c9f792d2c2f78b75626f7bf2abc85a0fff)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41911
(cherry picked from commit 06589d6e029c6ff64a7816d743e0a508abe6193b)
No reason that they should live directly under iicbus
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41908
(cherry picked from commit 2f16049c985a364e2bd2b256f5bef9af17e10c62)
Move the timerfd impelemntation from linux compat code to sys/kern. Use
it to implement the new system calls for timerfd. Add a hook to kern_tc
to allow timerfd to know when the system time has stepped. Add kqueue
support to timerfd. Adjust a few names to be less Linux centric.
RelNotes: YES
Reviewed by: markj (on irc), imp, kib (with reservations), jhb (slack)
Differential Revision: https://reviews.freebsd.org/D38459
This is an attempt at clean-room implementation of the Linux'
membarrier(2) syscall. For documentation, you would need to read
both membarrier(2) Linux man page, the comments in Linux
kernel/sched/membarrier.c implementation and possibly look at
actual uses.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32360
This basic version of the driver obtains properties of the "sff,sfp"
compatible devices and implements a simple interface to provide an I2C
bus device for the rest of the drivers (e.g. to implement SIOCGI2C).
Both of the interface and driver are subjects for a further
generalization to be used in case of non-FDT and non-arm64 platforms.
Reviewed by: bz, manu
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D41440
Add a driver to connect vt to the VirtIO GPU device in 2D mode. This
provides a output on the display when a qemu virtio gpu device is
added, e.g. with -device virtio-gpu-pci.
Tested on qemu using UTM, and a Hetzner arm64 VM instance.
Reviewed by: bryanv (earlier version)
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40094
This is the list of changes since last release, taken from the release
notes of Chelsio Unified Wire 3.18.0.1.
Version : 1.27.4.0
Date : 07/05/2023
=======================================
Fixes
-----
BASE:
- Handle 40G to 100G cable change.
- Avoid unnecessary i2c read.
=======================================
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
MFC after: 1 week
With the general removal of MIPS support there's no longer a need to
support these integrated switches.
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D41394
All of these are obsoleted by the general removal of MIPS support.
Actually, corresponding to the removed AH_SUPPORT_x, there is more
superfluous support sprinkled across the HAL source. However, that
code is left in place for now in order to ease a sync to NetBSD.
Reviewed by: emaste (w/ man page fix)
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D41355
Following the removal of general MIPS support, there's no longer a need
to have the AHB bus-frontend in place, which according to Linux sources
also isn't used with any non-MIPS SoCs. For simplicity, PCI bus support
is only made conditional on the main one again, i. e. device ath_pci is
removed, and built into the main module, i. e. if_ath_pci.ko obsoleted,
respectively.
Effectively, this reverts the following commits and associated changes:
dba9c85977e849bb3ecb
Approved by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D41354
Some SoCs have an external firmware doing power management, clock
and other stuffs. (Xilinx, ARM Juno etc ...)
The way it is represent in the DTB is usually having a 'firmware' node
under the root node and have some nodes under it with the correct
compatible strings.
The firmware node itself doesn't have any compatible strings.
This driver is simple subclassed from simplebus and attaches at
BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE so early drivers (like clock drivers)
can still have a change to attach early.
Reviewed by: andrew
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37612
This code was used by the first incarnation of wg(4) and is dead ever
since f187d6dfbf has removed the latter
again. Moreover, this code matched iflib(4) like a square peg fits in
a round hole, was incomplete and despite some hacks still tailored to
VPC and wg(4) but not generic. In effect, this reverts the following:
09f6ff4f1a (w/ its "ancillary changes")
9aeca213241f93e931d90f9544d03e0dd691b412
Reviewed by: erj, kbowling
Differential Revision: <https://reviews.freebsd.org/D41196>
When spibus is attached as child of Intel SPI controller it scans all
ACPI nodes for "SPI Serial Bus Connection Resource Descriptor" described
in section 19.6.126 of ACPI specs.
If such a descriptor is found, SPI child is added to spibus, it's SPI
chip select, mode, clock, IRQ resource and ACPI handle are added to ivars.
Existing ACPI bus-hosted child is deleted afterwards.
Apple ACPI SPI extensions are supported.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41248
These are modeled on the API used for m_copydata/m_copyback and the
crypto buffer APIs. One day it might be nice to reduce the
proliferation of these by adding cursors and using memdesc directly
for crypto request buffers.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D40615
The removal of the sparc64 support in February 2020 obsoleted the
VTOC8 partitioning scheme as no other FreeBSD platform makes use
of it. Moreover, the code is bitrotting as nothing defines e. g.
LOADER_VTOC8_SUPPORT any more and, thus, should go now, too. With
this change, the following commits are reverted as far as VTOC8
is concerned and parts haven't already previously been deleted
along with prior sparc64 removals:
094fcb157da7d366e958ba8d50d08b
The alignment example d9711c28ef
added to the VTOC8 section of gpart.8 is folded into the MBR one.
This should finally conclude the deorbit of sparc64-specific bits.
We had joy, we had fun
we ran Unix on a Sun.
But that source and the song
of FreeBSD have all gone.
Credits to Michael Bueker for the original "Unix on a Sun" and Rod
McKuen for the "Seasons in the Sun" lyrics.
The mac_ipacl policy module enables fine-grained control over IP address
configuration within VNET jails from the base system.
It allows the root user to define rules governing IP addresses for
jails and their interfaces using the sysctl interface.
Requested by: multiple
Sponsored by: Google, Inc. (GSoC 2019)
MFC after: 2 months
Reviewed by: bz, dch (both earlier versions)
Differential Revision: https://reviews.freebsd.org/D20967
gVNIC is a virtual network interface designed specifically for
Google Compute Engine (GCE). It is required to support per-VM Tier_1
networking performance, and for using certain VM shapes on GCE.
The NIC supports TSO, Rx and Tx checksum offloads, and RSS.
It does not currently do hardware LRO, and thus the software-LRO
in the host is used instead. It also supports jumbo frames.
For each queue, the driver negotiates a set of pages with the NIC to
serve as a fixed bounce buffer, this precludes the use of iflib.
Reviewed-by: markj
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39873
This allows us to support this hardware and, in the future, use clocks
so they are enabled past the initial kernel boot process.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D30103
Add files needed by ath1?k drivers to linuxkpi/linuxkpi_wlan.
This contain (skeleton) implementations of what is needed to
compile but specifically mhi/qmi/qrtr will need more work for
ath11k.
MFC after: 2 months
These are the changes since the last update (copy-pasted from the
release notes for Chelsio Unified Wire v3.18.0.0):
====================
Version : 1.27.3.0
Date : 04/07/2023
Fixes
-----
BASE:
- Fixed a hang if module eeprom reads gives invalid data.
- KR backlplane no-fec link problem fixed.
OFLD:
- iscsi ddp errors fixed.
- iwarp connection abort in rare cases causing NIC traffic hang fixed.
ENHANCEMENTS
------------
BASE:
- Cisco GLC-TE 1G modules support added.
====================
Version : 1.27.1.0
Date : 12/02/2022
Fixes
-----
BASE:
- memwrite dsgl cannot be used for T5.
OFLD:
- Enabled FCoE in SO adapters.
- TOE-TLS crash fixed.
- iscsi hang fixed.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The xen_domain_type and HYPERVISOR_shared_info variables are shared by
all Xen architectures, so they should be in common rather than
reimplemented by each architecture.
hvm_start_flags is used by xen_initial_domain() and so needs to be in
common.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D28982
The event channel source code or equivalent is needed on all
architectures. Since much of this is viable to share, get this moved out
of x86-land. Each interrupt interface then needs a distinct back-end
implementation.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Original implementation: Julien Grall <julien@xen.org>, 2014-01-13 17:41:04
Differential Revision: https://reviews.freebsd.org/D30236
The present implementation is only for x86. Other architectures need
adjustments for querying presence of EFI.
Xen's EFI support is also quite troublesome on non-x86. This is being
slowly remedied, but until in better shape the EFI clock functionality
should be disabled.
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D31065
Notable upstream pull request merges:
#12194 Fix short-lived txg caused by autotrim
#13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()
#13392 Implementation of block cloning for ZFS
#13741 SHA2 reworking and API for iterating over multiple implementations
#14282 Sync thread should avoid holding the spa config write lock
when possible
#14283 txg_sync should handle write errors in ZIL
#14359 More adaptive ARC eviction
#14469 Fix NULL pointer dereference in zio_ready()
#14479 zfs redact fails when dnodesize=auto
#14496 improve error message of zfs redact
#14500 Skip memory allocation when compressing holes
#14501 FreeBSD: don't verify recycled vnode for zfs control directory
#14502 partially revert PR 14304 (eee9362a7)
#14509 Fix per-jail zfs.mount_snapshot setting
#14514 Fix data race between zil_commit() and zil_suspend()
#14516 System-wide speculative prefetch limit
#14517 Use rw_tryupgrade() in dmu_bonus_hold_by_dnode()
#14519 Do not hold spa_config in ZIL while blocked on IO
#14523 Move dmu_buf_rele() after dsl_dataset_sync_done()
#14524 Ignore too large stack in case of dsl_deadlist_merge
#14526 Use .section .rodata instead of .rodata on FreeBSD
#14528 ICP: AES-GCM: Refactor gcm_clear_ctx()
#14529 ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx()
#14532 Handle unexpected errors in zil_lwb_commit() without ASSERT()
#14544 icp: Prevent compilers from optimizing away memset()
in gcm_clear_ctx()
#14546 Revert zfeature_active() to static
#14556 Remove bad kmem_free() oversight from previous zfsdev_state_list
patch
#14563 Optimize the is_l2cacheable functions
#14565 FreeBSD: zfs_znode_alloc: lock the vnode earlier
#14566 FreeBSD: fix false assert in cache_vop_rmdir when replaying ZIL
#14567 spl: Add cmn_err_once() to log a message only on the first call
#14568 Fix incremental receive silently failing for recursive sends
#14569 Restore ASMABI and other Unify work
#14576 Fix detection of IBM Power8 machines (ISA 2.07)
#14577 Better handling for future crypto parameters
#14600 zcommon: Refactor FPU state handling in fletcher4
#14603 Fix prefetching of indirect blocks while destroying
#14633 Fixes in persistent error log
#14639 FreeBSD: Remove extra arc_reduce_target_size() call
#14641 Additional limits on hole reporting
#14649 Drop lying to the compiler in the fletcher4 code
#14652 panic loop when removing slog device
#14653 Update vdev state for spare vdev
#14655 Fix cloning into already dirty dbufs
#14678 Revert "Do not hold spa_config in ZIL while blocked on IO"
Obtained from: OpenZFS
OpenZFS commit: 431083f75b
This change does the following:
Base Netlink KPIs (ability to register the family, parse and/or
write a Netlink message) are always present in the kernel. Specifically,
* Implementation of genetlink family/group registration/removal,
some base accessors (netlink_generic_kpi.c, 260 LoC) are compiled in
unconditionally.
* Basic TLV parser functions (netlink_message_parser.c, 507 LoC) are
compiled in unconditionally.
* Glue functions (netlink<>rtsock), malloc/core sysctl definitions
(netlink_glue.c, 259 LoC) are compiled in unconditionally.
* The rest of the KPI _functions_ are defined in the netlink_glue.c,
but their implementation calls a pointer to either the stub function
or the actual function, depending on whether the module is loaded or not.
This approach allows to have only 1k LoC out of ~3.7k LoC (current
sys/netlink implementation) in the kernel, which will not grow further.
It also allows for the generic netlink kernel customers to load
successfully without requiring Netlink module and operate correctly
once Netlink module is loaded.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39269
This standalone module is the last vestage of ATM support in the tree so
send it on its way.
Reviewed by: manu, emaste
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D38880
Most ATM support was removed prior to FreeBSD 12. The netgraph support
was kept as it was less intrusive, but it is presumed to be unused.
Reviewed by: manu
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D38879
When ALTQ is enabled ifnet accessors already need to be called, largely
defeating the purpose of the inline. To that extent, make the ALTQ form
functions in the netstack proper, and make them always available.
Reviewed By: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38104
