The specification for the Toeplitz function doesn't require to set the key
explicitly to be symmetric. In case a symmetric functionality is required
a symmetric key can be simply used.
Wrongly forcing the algorithm to symmetric causes the wrong packet
distribution and a performance degradation.
Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org
Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Alex Vainman <alexv@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[khng: cherry-picked from Linux
b7165bd0d6cbb93732559be6ea8774653b204480]
Sponsored by: Juniper Networks, Inc.
MFC after: 7 days
Reviewed by: kib, zlei
Differential Revision: https://reviews.freebsd.org/D42178
(cherry picked from commit 813d981e1e78daffde4b2a05df35d054fcb4343f)
Summary: IFNET_RLOCK() is not sufficient, the epoch needs entered.
Reviewed by: hselasky
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38711
With clang 15, the following -Werror warning is produced:
sys/dev/mlx5/mlx5_ib/mlx5_ib_devx.c:1926:6: error: variable 'num_alloc_xa_entries' set but not used [-Werror,-Wunused-but-set-variable]
int num_alloc_xa_entries = 0;
^
The 'num_alloc_xa_entries' variable appears to have been a debugging aid
that has never been used for anything, so remove it.
MFC after: 3 days
In the clean_mr() error path the 'mr' should be freed.
Linux commit:
5942d8ae411775b76e5e1ab0cce57b0666516f2d
PR: 264653
MFC after: 1 week
Sponsored by: NVIDIA Networking
The IBTA specification has new speed - NDR. That speed supports signaling
rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX
device to IB speed and width. Added translation of new 100Gb, 200Gb and
400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.
Linux commits:
f946e45f59ef01ff54ffb3b1eba3a8e7915e7326
MFC after: 1 week
Sponsored by: NVIDIA Networking
Backport from Linux 5.17 (drivers/infiniband/hw/mlx5/fs.c)
This fixes creating flow rules from user-space after the
kernel space update based on Linux 5.7-rc1 .
Sponsored by: NVIDIA Networking
Currently, unicast/multicast loopback raw ethernet (non-RDMA) packets
are sent back to the vport. A unicast loopback packet is the packet
with destination MAC address the same as the source MAC address. For
multicast, the destination MAC address is in the vport's multicast
filter list.
Moreover, the local loopback is not needed if there is one or none
user space context.
After this patch, the raw ethernet unicast and multicast local
loopback are disabled by default. When there is more than one user
space context, the local loopback is enabled.
Note that when local loopback is disabled, raw ethernet packets are
not looped back to the vport and are forwarded to the next routing
level (eswitch, or multihost switch, or out to the wire depending on
the configuration).
Linux commits:
c85023e153e3824661d07307138fdeff41f6d86a
8978cc921fc7fad3f4d6f91f1da01352aeeeff25
MFC after: 1 week
Sponsored by: NVIDIA Networking
While at it only output driver version to dmesg(8) when hardware is present.
Differential Revision: https://reviews.freebsd.org/D29100
MFC after: 1 week
Reviewed by: kib and markj
Sponsored by: NVIDIA Networking
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16() validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.
Linux commit:
65389322b28f81cc137b60a41044c2d958a7b950
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
RoCE is short for Remote direct memory access over Converged Ethernet.
ECN is short for Explicit Congestion Notification.
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state makes the
checks of out-of-scope redundant. Let's remove them together with updating
function signature to return boolean result.
While at it remove unused "ll" parameter from ib_modify_qp_is_ok().
Linux commit:
19b1f54099b6ee334acbfbcfbdffd1d1f057216d
d31131bba5a1630304c55ea775c48cc84912ab59
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Linux commit:
72a7720fca37fec0daf295923f17ac5d88a613e1
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Extended atomics are supported with RC and XRC QP types, but Linux commit
a60109dc9a95 added an unneeded check to to_mlx5_access_flags().
This broke XRC QPs.
The following ib_atomic_bw invocation over XRC reproduces the issue:
ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD
It is safe to remove such checks because the QP type was already checked
in ib_modify_qp_is_ok(), which was previously called from
mlx5_ib_modify_qp().
Linux commit:
13f8d9c16693afb908ead3d2a758adbe6a79eccd
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The maximum page size in the mkey context is 2GB.
Until today, we didn't enforce this requirement in the code, and therefore,
if we got a page size larger than 2GB, we have passed zeros in the
log_page_shift instead of the actual value and the registration failed.
This patch limits the driver to use compound pages of 2GB for mkeys.
Linux commit:
762f899ae7875554284af92b821be8c083227092
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The patch simplifies mlx5_ib_cont_pages and fixes the following
issues in the original implementation:
First issues is related to alignment of the PFNs. After the check
base + p != PFN, the alignment of the PFN wasn't checked. So the PFN
sequence 0, 1, 1, 2 would result in a page_shift of 13 even though
the 3rd PFN is not 8KB aligned.
This wasn't actually a bug because it was supported by all the
existing mlx5 compatible device, but we don't want to require
this support in all future devices.
Another issue is because the inner loop didn't advance PFN so
the test "if (base + p != pfn)" always failed for SGE with
len > (1<<page_shift).
Linux commit:
d67bc5d4e3e100d762c0f57ea67f28bc219698a6
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.
This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Linux commit:
ca5b91d63192ceaa41a6145f8c923debb64c71fa
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Given all the code does operate on struct ifnet, the last step in this
longer series of changes now is to rename struct net_device to
struct ifnet (that is what it was defined to in the LinuxKPi code).
While mlx4 and OFED are "shared" code the decision was made years ago
to not write it based on the netdevice KPI but the native ifnet KPI
for most of it. This commit simply spells this out and with that
frees "struct netdevice" to be re-done on LinuxKPI to become a more
native/mixed implementation over time as needed by, e.g., wireless
drivers.
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D30515
Rename the last remaining bits depending on ifnet from linux/netdevice.h
instead of using the compat macros. This helps clearing up
struct netdevice being struct ifnet from linux/netdevice.h.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, kib
X-D-R: D29366
Differential Revision: https://reviews.freebsd.org/D29497
This change include several changes as listed below all related to UAR.
UAR is a special PCI memory area where the so-called doorbell register and
blue flame register live. Blue flame is a feature for sending small packets
more efficiently via a PCI memory page, instead of using PCI DMA.
- All structures and functions named xxx_uuars were renamed into xxx_bfreg.
- Remove partially implemented Blueflame support from mlx5en(4) and mlx5ib.
- Implement blue flame register allocator.
- Use blue flame register allocator in mlx5ib.
- A common UAR page is now allocated by the core to support doorbell register
writes for all of mlx5en and mlx5ib, instead of allocating one UAR per
sendqueue.
- Add support for DEVX query UAR.
- Add support for 4K UAR for libmlx5.
Linux commits:
7c043e908a74ae0a935037cdd984d0cb89b2b970
2f5ff26478adaff5ed9b7ad4079d6a710b5f27e7
0b80c14f009758cefeed0edff4f9141957964211
30aa60b3bd12bd79b5324b7b595bd3446ab24b52
5fe9dec0d045437e48f112b8fa705197bd7bc3c0
0118717583cda6f4f36092853ad0345e8150b286
a6d51b68611e98f05042ada662aed5dbe3279c1e
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.
The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Linux commit:
e355477ed9e4f401e3931043df97325d38552d54
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Report EQE data upon CQ completion to let upper layers use this data.
Linux commit:
4e0e2ea1886afe8c001971ff767f6670312a9b04
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.
Linux commit:
38164b771947be9baf06e78ffdfb650f8f3e908e
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Make sure order of cleanup is exactly the opposite of initialization.
Linux commit:
f4044dac63e952ac1137b6df02b233d37696e2f5
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Currently the linking order of the infiniband, IB, modules decide in which
order the clients are attached and detached. For example one IB client may
use resources from another IB client. This can lead to a potential deadlock
at shutdown. For example if the ipoib is unregistered after the ib_multicast
client is detached, then if ipoib is using multicast addresses a deadlock may
happen, because ib_multicast will wait for all its resources to be freed before
returning from the remove method.
Fix this by using module_xxx_order() instead of module_xxx().
Differential Revision: https://reviews.freebsd.org/D23973
MFC after: 1 week
Sponsored by: Mellanox Technologies
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
The index should be computed as distance from arg[0] and not
the beginning of struct mlx5_ib_congestion .
While at it fix a use of zero length array to avoid depending
on undefined compiler behaviour.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add the 512 bytes limit of RDMA READ and the size of remote address to the max
SGE calculation.
Submitted by: slavash@
Linux commit: 288c01b746aa
MFC after: 3 days
Sponsored by: Mellanox Technologies
CM layer calls ib_modify_port() regardless of the link layer.
For the Ethernet ports, qkey violation and Port capabilities
are meaningless. Therefore, always return success for ib_modify_port
calls on the Ethernet ports.
Linux Commit:
ec2558796d25e6024071b6bcb8e11392538d57bf
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
