Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
of various keyboard drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
Keyboard grabbing is disabled in KDB and during panics.
MFC with: 4a0db5e292
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
of psm(4), ums(4) and sysmouse(4) drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
MFC after: 2 weeks
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
usbhid(4) vs other USB HID drivers precedence is determined by
hw.usb.usbhid.enable loader tunable and HID quirk subsystem rather
than by device_probe() return value. Raise priority high enough to
always give usbhid(4) a possible chance to attach.
Fixes usbhid(4) attachment on USB device hotplug.
Reported by: Ivan Quitschal <tezeka_AT_hotmail_DOT_com>
MFC after: 1 week
With clang 15, the following -Werror warning is produced:
sys/dev/usb/input/atp.c:2018:11: error: variable 'n_vertical_scrolls' set but not used [-Werror,-Wunused-but-set-variable]
u_int8_t n_vertical_scrolls = 0;
^
The 'n_vertical_scrolls' variable is no longer used after 197b9a2ef0,
so remove it.
MFC after: 3 days
This avoids an issue where IN endpoint data received from the device right
before the file handle is closed, gets lost.
PR: 263995
MFC after: 1 week
Sponsored by: NVIDIA Networking
The result of the request computed in new_status was never returned to
the caller leaving new_status as a set-but-unused variable. Removing
new_status leaves sc->previous_status as a write-only variable.
Removing sc->previous_status leaves current_status as a write-only
variable, so it collapses down to removing the entire
USB_ST_TRANSFERRED case.
Arguably, all of the support for UHID_SNES_STATUS_DT_RD should be
removed as it doesn't return anything to the caller. If the request
should be fixed instead then this commit should be reverted and
new_status should be returned to whoever submitted the request.
Differential Revision: https://reviews.freebsd.org/D34840
This command is intended to be compatible with USB_REQUEST ioctl.
It is required to perform arbitrary control endpoint requests by device
drivers which can switch between HID and native non-HID modes.
MFC after: 2 month
Use thunks or alternative access methods to support ioctls without
the COMPAT_32BIT hacks that store pointers in uint64_t's on 32-bit
platforms. This should allow a normal i386 libusb to work.
On CheriBSD, the sizes of the structs will differ between CheriABI
(the default) and freebsd64 no matter what so we need proper compat
support there. This change paves the way.
Reviewed by: hselasky, jrtc27 (prior version)
The second set of USB transfer is requested by hkbd(4) and
should improve HID keyboard handling in kdb and panic contexts.
MFC after: 1 week
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30486
Which happens when USB transfer setup is failed.
MFC after: 1 week
PR: 254974
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30485
This fixes inability to start USB xfers in a case when FIFO has been
already open()-ed but no read() or poll() calls has been issued yet.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30343
This fixes lose of evdev events after moused has been killed.
While here use bitwise operations for UMS_EVDEV_OPENED flag.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30342
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
If LED state is set through evdev interface, than asynchronous nature
of USB transfer callback can lead to change of order of events echoed
back to userland as it causes LED events to be echoed with some lag.
Fix that with echoing of LED events synchronously in ioctl handler.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27750
Unlike AT keyboards, HID devices are able to send all pc105 key
states within a single report. Let evdev to transmit all key state
changes within a single report too.
Reviewed by: hselasky
Obtained from: sysutils/iichid
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27749
Hardware timestamp reporting is disabled by default as it produces many
extra events which are not handled by consumers like libinput.
Add hw.usb.wmt.timestamps=1 tunable to loader.conf to enable it.
Obtained from: sysutils/iichid
