After r340644 there were two things wrong in cases where there is both
an ECDT, and an EC device exposed via acpica. The first is a rather
trivial situation where the device desc would say ECDT even when it was
not implicitly created via ECDT (not really sure why the compiler
doesn't seem to warn about this).
The other more pervasive issue is that the code is designed to
essentially not do anything for EC probe when its uid was already
created an EC based on the ECDT's uid. The issue was that probe would
still return 0 in this case, and so we'd end up with some weird
duplication. Now to be honest, I'm not actually sure what exactly broke,
but it was definitely not working as intended. To fix this, all that is
really needed is to make sure we return ENXIO when we're probing the
device already added for the ECDT entry. While here though, move the
check for this earlier to avoid wasted cycles when we know after
obtaining the uid that it's duplicative.
There remains one questionable bit here which I don't want to touch -
when doing probe for PNP0C09, if acquiring _UID for the device fails, 0
is assumed, which is a valid UID used by the implicit ECDT.
Reported by: Charlie Li, et al.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D18311
If the regulator is unused it will be disabled by the regulator_shutdown sysinit.
Tested on pinebook where the backlight is controlled by a fixed-regulator.
The regulator doesn't have a regulator-boot-on param (I'm gonna upstream this) and so we disable it at probe.
We later enable it but this cause the screen to go black.
Linux doesn't disable regulator at boot (at least for fixed-regulator) so better match this to have the same UX.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17978
Automatically generated using mkconfig.py.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18138
Pick up Medford2 interfaces.
Split AOE operations out into own header.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18137
Add security level to image boot header.
Submitted by: Andrew Jackson <ajackson at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18289
HW needs to know which UDP packets should be treated as tunnel
encapsulation to do inner packet recognition, classification and
offloads.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18134
Active PS/2 multiplexing is a method for attaching up to four PS/2
pointing devices to a computer. Enabling of multiplexed mode allows
commands to be directed to individual devices using routing prefixes.
Multiplexed mode reports input with each byte tagged to identify
its source. This method differs from one currently supported by psm(4)
where so called guest device (trackpoint) is attached to special
interface located on the host device (touchpad) and latter performs
guest protocol conversion to special encapsulation packet format.
At present time active PS/2 multiplexing is used in some models of
HP laptops e.g. EliteBook 8560w, 9470m. Enabling of absolute operation
mode on such touchpads is connected with following problems:
1. Touchpad's port priority is lower than trackpoint's. That blocks
information queries thus prevents touchpad detection and configuration.
2. Touchpad and trackpoint have different protocol packet sizes and
sync bytes.
As PS/2 usage is on decline only minimal possible set of changes to
support Synaptics touchpad and generic mouses is implemented.
Active multiplexing mode is enabled only at probe stage to scan through
attached PS/2 devices to query and configure Synaptics touchpad.
After touchpad has been configured, mux is switched back to legacy
(hidden multiplexing) mode to perform normal interrupt-driven input
data processing. Overflow bit values rather than tags are used to
separate packets produced by different devices. Switching back to
legacy mode allows to avoid psm(4) and atkbd(4) rework to support
4 instances of mouse driver.
Note: While in hidden multiplexing mode KBC does some editing of the
packet stream. It remembers the button bits from the last packet
received from each device, and replaces the button bits of every
packet with the logical OR of all devices’ most recent button bits.
This sort of button crosstalk results in spurious button events
which are inhibitted with various tricks. E.g. trackpoint middle
button events are suppressed while trackpad surface is touched and
touchpad left and right button events are suppressed if corresponding
trackpoint buttons are pressed.
PR: 231058
Reported by: Michael Figiel <mifigiel@gmail.com>
Tested by: Michael Figiel <mifigiel@gmail.com>
MFC after: 2 weeks
It appeared that "0x46 identity middle byte" response is caused by so called
"Active PS/2 multiplexing controller" presence. Support for it will be added
in next commit.
If HW/FW supports tunnel encapsulations, Rx event may contain
either inner or outer packet classes. By default outer classes
are requested. Make it possible to request inner classes to
have more information about packet type and allow to interpret
inner frame checksum validation results correctly.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18133
Encoding packed stream buffer size in RxQ type is not a future-proof
idea taking into account a new RxQ types with extra parameters.
To be consistent make packet stream buffer size a separate parameter.
In order to avoid blowing of the default RxQ create function prototype
add a dedicated function to create packed stream RxQ without not
applicable paramters.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18132
Rx scatter may be applicable to different Rx queue types.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18131
Falcon support has been withdrawn from libefx, however, there is still
an obsolete Falcon-specific assertion that efx_mac_stats_upload()
and efx_port_poll() aren't concurrent. To be consistent with an overall
Falcon support revocation it's desirable to remove it.
Fix debug build invalid assertion failure.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18130
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18129
Fix warning
"C6001: Using uninitialized memory '*sensor_maskp'"
which could occur when the npages argument to efx_mcdi_sensor_info()
is less than or equal to zero.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18128
Expand on comment on RSS_CONTEXT_ALLOC_IN_NUM_QUEUES field.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18127
The fail4 label was used twice, so it doesn't need removing.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18126
Fix multiple level 4 warnings
"C4214: nonstandard extension used: bit field types other than int";
no functional changes.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18125
Fix two level 4 warnings
"C4057: 'function': 'const uint8_t *' differs in indirection to
slightly different base types from 'caddr_t'"; no functional changes.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18124
Fix multiple level 4 warnings
"C4189: 'xxx': local variable is initialized but not referenced";
no functional changes.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18123
Fix multiple level 4 warnings
"C4100: 'xxx': unreferenced formal parameter"
no functional changes.
The _NOTE(ARGUNUSED(xxx)) annotations are being exposed to the Visual
Studio 2015 C compiler with the following:
#define _NOTE_ARGUNUSED(...) UNREFERENCED_PARAMETER((__VA_ARGS__));
#define _NOTE(_annotation) _NOTE_ ## _annotation
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18122
Fix level 4 warning
"C4245: 'initializing': conversion from 'int' to 'uint32_t',
signed/unsigned mismatch" warning; no functional changes.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18121
Fix level 4 warning
"C4244: '+=': conversion from 'unsigned int' to 'uint16_t', possible loss
of data"; no functional changes.
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18120
EFSYS_PROBE1 takes one typed value (in addition to the probe name),
whereas EFSYS_PROBE has just the probe name.
Which to use is determined by the probe name - "fail1" probes are
expected to include the function result.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18118
The compilation failed because __efx_sram_pattern_fns was used in
efx_nic.c, but defined in efx_sram.c which is only needed when
supporting Siena.
To fix it move all the code using __efx_sram_pattern_fns into
Siena-specific files (except for the definition in efx_sram.c itself,
as that file only needs to be included in Siena-supporting builds
anyway).
The functions to test registers and tables are unlikely to apply to any
new hardware and so can be moved into Siena files. Since Huntington
such tests have been implemented in firmware.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18117
EFSYS_OPT_PHY_STATS can be used with Huntington or Medford, not just Siena.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18116
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18115
MEDFORD_RX_WPTR_ALIGN is not used.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18114
Submitted by: Andrew Jackson <ajackson at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18113
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18112
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18111
Fixed build issue with the EFSYS_OPT_PHY_LED_CONTROL for Huntigton and
Medford.
Submitted by: Vijay Srivastava <vijays at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18110
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18109
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18108
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18107
MC_CMD_INIT_RXQ_OUT_LEN is not used any more.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18106
For encapsulated packets, the firmware gives info about the inner frame
fields by default. When not using encapsulation offload, ask for info
about the outer frame instead.
On SFN8xxx with firmware version before v6.4.2.1007 driver reload is
needed after switching from full-feature to low-latency firmware
variant since the driver still thinks that firmware supports
encapsulation, but firmware does not tolerate request to provide info
about outer frame in Rx events.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18105
With MCDIv2, the reponse length can be to big to fit into the
CMDDONE_DATALEN field in the MCDI completion event. But rather that
the length being truncated, it can overflow into the CMDDONE_ERRNO
field (this is a longstanding firmware bug). Hence the CMDDONE_ERRNO
field may not be valid.
It isn't necessary to use the value in the CMDDONE_ERRNO field though,
so it can be ignored. The actual error code is already read from the
response header on MCDIv2 capable hardware and stored in emr_rc, so
that can be used instead.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18104
Use MCDIv2 for requests with a response size too long for MCDIv1.
Required for MC_CMD_MAC_STATS to reports the stats without using DMA.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18103
Inner checksum offloads may be used only if firmware supports
these tunnels.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18102
Remove the requirement that a device be a ACPI method battery to be supported
as a battery.
Require now that the device be in the battery devclass and implement the
get_status and get_info functions. This allows batteries which are not ACPI
method batteries to be supported.
Reviewed by: jtl
Approved by: jtl (mentor)
MFC after: 1 Month
Differential Revision: https://reviews.freebsd.org/D17434
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18101
In the case of packed stream real size of the buffer does not fit in
Rx descriptor byte count. Real size is specified on Rx queue setup.
Non-zero fake should be used to bypass hardware checks.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18100
Packed stream Rx datapath requires access to packed stream state
stored in event queue. Number of credits is upstead in event handler
on a new buffer, packets parsing on 64k boundary crossing and
Rx doorbell push to give credits back.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18099
RxQ type provides more information which may be useful to
setup event queue appropriately.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18098
Submitted by: Andrew Lee <alee at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18097
fix PreFAST issue, add missing annotation that function return value
should not be ignored. Fix alignment.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18096
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18095
