whu@ cannot reproduce the assertion failure which led to these ifdefs
being added in the first place, and since they appear wrong, i.e., the
assertions ought to apply to all platforms, let's remove them.
This reverts commits 0af5a0cd27 and
6f7b1310b6.
PR: 285681
Tested by: whu
MFC after: 2 weeks
(cherry picked from commit 54a3920dc9b3b5a47cdaaa3132b4fcf1c448a737)
- The BUS_DMA_KEEP_PG_OFFSET flag is needed, since
storvsc_xferbuf_prepare() assumes that only the first segment may have
a non-zero offset, and that all following segments are page-sized and
-aligned.
- storvsc_xferbuf_prepare() handles 64-bit bus addresses, so avoid
unneeded bouncing on i386.
PR: 285681
Reported by: dim
Tested by: dim, whu
MFC after: 2 weeks
(cherry picked from commit a319ba694538a38429115aaaf1d4b3946ea3a8b5)
Changing the rsc_switch flag using sysctl to turn rsc on or off
could hang. The orignal code sends request to host to get the
mtu setting. Sometimes the host fails to reply, causing
the thread to sleep forever waiting for the host response.
Use existing cached mtu from hn device instead to avoid calling
host.
Reported by: whu
Tested by: whu
MFC after: 1 week
(cherry picked from commit da1deb784d9ad3a4015a3f91fa1a5ce394fd3fdb)
Simplify the calls into the SMCCC firmware with the new
arm_smccc_invoke* macros.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D46987
(cherry picked from commit b9cd72b06d795a8c7b39df1f520e866ad7f11aa8)
An interface's bpf could feasibly not exist, in which case
bpf_peers_present() would panic from a NULL pointer dereference. Solve
this by adding a new IfAPI that could deal with a NULL bpf, if such
could occur in the network stack.
Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D42082
(cherry picked from commit 8f31b879ecaf9e738dba631df4606742ee404e8e)
bpf: Prefer the boolean form when calling bpf_peers_present()
Reviewed by: markj, kp, #network
MFC with: 8f31b879ecaf
Differential Revision: https://reviews.freebsd.org/D45509
(cherry picked from commit 89204d9dcbe28558fae65936a0e93f44d926b88f)
The allocation call could result in sleep lock violation if it is in
smp_rendezvous. Move it out. Also move the pcpu memory pointer to
vmbus_pcpu_data since it is only used on Hyper-V.
PR: 279738
Reported by: gbe
Fixes: 2b887687edc25bb4553f0d8a1183f454a85d413d
MFC after: 2 weeks
Sponsored by: Microsoft
(cherry picked from commit d0cb4674df97aa638d5d17861c364b1625f79401)
Add boot parameter hw.vmbus.tlb_hcall for tlb flush hypercall.
By default it is set to 1 to allow hyercall tlb flush. It can be
set to 0 in loader.conf to turn off hypercall and use system
provided tlb flush routine.
The change also changes flag in the per cpu contiguous memory
allocation to no wait to avoid panic happened some cases which there
are no enough contiguous memery available at boot time.
Reported by: gbe
Tested by: whu
MFC after: 1 week
Fixes: 2b887687edc25bb4553f0d8a1183f454a85d413d
Sponsored by: Microsoft
(cherry picked from commit e02d20ddff7f9f9509b28095459327bc183dab8a)
Currently FreeBSD uses IPI based TLB flushing for remote
TLB flushing. Hyper-V allows hypercalls to flush local and
remote TLB. The use of Hyper-V hypercalls gives significant
performance improvement in TLB operations.
This patch set during test has shown near to 40 percent
TLB performance improvement.
Also this patch adds rep hypercall implementation as well.
Reviewed by: whu, kib
Tested by: whu
Authored-by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Co-Authored-by: Erni Sri Satya Vennela <ernis@microsoft.com>
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D45521
(cherry picked from commit 2b887687edc25bb4553f0d8a1183f454a85d413d)
Setting media to autoselect would always return EOPNOTSUPP.
As autoselect is the only valid media, this change now returns
success instead.
PR: 264253
Reported by: Prakash Shiva <prakashs0234@gmail.com>
Reviewed by: Dexuan Cui <decui microsoft com>, whu
Approved by: whu
MFC after: 2 weeks
(cherry picked from commit 63a7c4be4ad524629292eee659d6542f1c5e9c21)
The msi address contains apic id. The code in vmbus_pcib_map_msi()
treats it as cpu id, which could cause mis-configuration of msix
IRQs, leading to missing interrupts for SRIOV devices. This happens
when apic id is not the same as cpu id on certain large VM sizes
with multiple numa domains in Azure. Fix this issue by correctly
mapping apic ids to cpu ids.
On vPCI version before 1.4, it only supports up to 64 vcpus
for msi/msix interrupt. This change also adds a check and returns
error if the vcpu_id is greater than 63.
Reported by: NetApp
Tested by: whu
Sponsored by: Microsoft
(cherry picked from commit 999174ba03642fa63c9654752993a62db461afc9)
QEMU emulates Hyper-V [1] but lacks the emulation for vmbus_res, thus no
coherence information is available. Add NULL check for it and fallback
to no coherence. This will prevent FreeBSD guests from panic on QEMU
with the Hyper-V enlightenment hv-synic enabled.
For real Hyper-V, both gen1 and gen2 have vmbus_res then they are not
affected by this change.
1. https://www.qemu.org/docs/master/system/i386/hyperv.html
PR: 274810
Reviewed by: mhorne, emaste, delphij, whu
Diagnosed by: mhorne
Fixes: e7a9817b8d32 Hyper-V: vmbus: implementat bus_get_dma_tag in vmbus
Insta-MFC approved by: re (delphij) for 14.0-RC4
Differential Revision: https://reviews.freebsd.org/D42414
(cherry picked from commit 63bf943d4af17799cef21e2bb78dd28003ce1ce5)
It is observed that netvsc's send rings could stall on the latest
Azure Boost platforms. This is due to vmbus_rxbr_read() routine
doesn't check if host is waiting for more room to put data, which
leads to host side sleeping forever on this vmbus channel. The
problem was only observed on the latest platform because the host
requests larger buffer ring room to be available, which causes
the issue to happen much more easily.
Fix this by adding check in the vmbus_rxbr_read call and signaling
the host in the callers if check returns positively.
Reported by: NetApp
Tested by: whu
Sponsored by: Microsoft
(cherry picked from commit 49fa9a64372b087cfd66459a20f4ffd25464b6a3)
In ARM64 Hyper-V UFS filesystem is getting corruption and those
corruptions are consistently happening just after hitting a page
boundary. It is unable to correctly read disk blocks into buffers
that are not aligned to 512-byte boundaries.
It happens because storvsc needs physically contiguous memory which
may not be the case when bus_dma needs to create a bounce buffer.
This can happen when the destination is not cache-line aligned.
Hyper-V VMs have VMbus synthetic devices and PCI pass-thru devices
that are added dynamically via the VMbus protocol and are not
represented in the ACPI DSDT. Only the top level VMbus node exists
in the DSDT. As such, on ARM64 these devices don't pick up coherence
information and default to not hardware coherent.
PR: 267654, 272666
Reviewed by: andrew, whu
Tested by: lwhsu
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D41728
(cherry picked from commit e7a9817b8d328dda04069b65944ce2ed6f54c6f0)
Current code in hn/netvsc tries to merge (logical AND) VF and
its own capability bits when a VF is attached. This results in
losing some key VF features, especially in tx path. For example,
the VF's txcsum, rxcsum or tso bits could be lost if any of
these are not in hn/netvsc's own capablility field.
Actually when VF is attached, hn just needs to use VF's caps
as all the tx packets would be forwarded to the VF interface.
Fix this problem by doing so.
Reported by: whu
Tested by: whu
MFC after: 3 days
Sponsored by: Microsoft
(cherry picked from commit 289ba6b870f79d8dbd9e8022c4fa23469be11a73)
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
When running VM on ARM64 Hyper-V, we have seen netvsc/hn driver hit
assert on reading duplicated network completion packets over vmbus
channel or one of the tx channels stalls completely. This seems to
caused by processor reordering the instructions when vmbus driver
reading or updating its channel ring buffer indexes.
Fix this by using load acquire and store release instructions to
enforce the order of these memory accesses.
PR: 271764
Reported by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Tested by: whu
Sponsored by: Microsoft
Vmbus_synic_setup() is invoked via vmbus_intrhook -> vmbus_doattach
-> smp_rendezvous. On !EARLY_AP_STARTUP (e.g., aarch64), SMP isn't
functional in intrhooks and smp_rendezvous() will just call
vmbus_synic_setup() on the boot processor. There's nothing that will
initialize the pcpu data on every other AP.
To fix it we need to use SI_SUB_SMP for vmbus_doattach(). With this
patch the vmbus interrupt should work on all arm64 cpus on HyperV.
Reported by: kevans
Reviewed by: kevans, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Obtained from: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D40279
In the Hyper-V drivers we need to allocate buffers shared between the
host and guest. This memory has been allocated with bus_dma, however
it doesn't use this correctly, e.g. it is missing calls to
bus_dmamap_sync. Along with this on arm64 we need this memory to be
mapped with the correct memory type that bus_dma may not use.
Switch to contigmalloc to allocate this memory as this will correctly
allocate cacheable memory.
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40227
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Summary:
Coverity reports the use of two uninitialized variables in the hyperv
driver. Examination shows the variables can be accessed while
uninitialized in error cases. Fix both.
CID: 1365235
CID: 1365236
Sponsored by: Dell Technologies
MFC after: 1w
Test Plan: Changes in use at $WORK
Reviewers: robert.herndon_dell.com, vangyzen, bret_ketchum_dell.com
Subscribers: imp, badger
Differential Revision: https://reviews.freebsd.org/D38551
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
This patch does remaining enablement in hyperv vpci driver to work
on arm64 Hyper-V. For that it required to use PCI protocol 1.4 and
corresponding different PCI message handling. Also new MSI allocation,
MSI-X mapping, release.
This is the last patch of total three patches to enalbe Hyper-V vPCI
support in arm64.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Obtained from: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37958
This is enabling the PCI protocol 1.4 and corresponding structures
in order to support arm64 Hyper-V.
This is the 2nd of the three patches to enable Hyper-V vPCI support
in arm64.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Obtained from: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37780
of various keyboard drivers.
EVIOCGRAB ioctl execution on /dev/input/event# device node gains
exclusive access to this device to caller. It is used mostly for
development purposes and remote control software. See e.g.
https://reviews.freebsd.org/D30020 which is the reason of creation
of this change.
Keyboard grabbing is disabled in KDB and during panics.
MFC with: 4a0db5e292
Tested by: corvink
Differential revision: https://reviews.freebsd.org/D30542
In non-Hyper-V systems during Hyper-V initialization, system
initialization was getting hung, as hyperv_identify(),
was returning successful irrespective of the type of the platform.
Reviewed by: andrew, whu
Fixes: 9729f076e4
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37219
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
Refactor the code to put split the MSR values for x86 and arm64
Hyper-V. Code not yet built. This is one of several patches for
the arm64 Hyper-V enablement.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37103
This is the second part of the ARM64 Hyper-V enablement.
These changes here are mostly with Make, release changes and also
changes required in vmbus.c hyperv.c and common files in hyperv.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36467
In ARM64 gen2 Hyper-V, use IRQ resource from vmbus_res, which is owning
the IRQ for current device tree. It allows the MMIO resource to be
successfully allocated for vmbus from parent acpi_syscontainer.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D37064
The changes are to refactor the code of vmbus.c and hyperv.c to keep minimal
arch specific codes there and have them in separate files in x86/ arm64/ .
x86 is a new directory, which contains codes for x86 / x86_64. Instead of
repeating the same codes in existing amd64/ and i386/, this approach reduced
the repetition. This is first of three patches for Hyper-V enablement.
Reviewed by: whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36466
