The VM generation counter is a 128-bit value exposed by the BIOS via ACPI.
The value changes to another unique identifier whenever a VM is duplicated.
Additionally, ACPI provides notification events when such events occur.
The driver decodes the pointer to the UUID, exports the value to userspace
via OPAQUE sysctl blob, and forwards the ACPI notifications in the form of
an EVENTHANDLER invocation as well as userspace devctl events.
See design paper: https://go.microsoft.com/fwlink/p/?LinkID=260709
The implementation was landed in r344913 and has had some bake time (at
least on my personal systems). There is some discussion of the motivation
for defaulting to this cipher as a PRF in the commit log for r344913.
As documented in that commit, administrators can retain the prior (AES-ICM)
mode of operation by setting the 'kern.random.use_chacha20_cipher' tunable
to 0 in loader.conf(5).
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22878
This effectively reverts r355935, but is functionally equivalent. We gain no
benefit from storing the index and repeatedly fetching the keyboard with
`kbd_get_keyboard` when we need it. We'll be notified when it's going away
so we can clean up the pointer.
All existing references were trivially converted. Only once instance
actually needed the index.
With absolutely no keyboards attached and no kbdmux in kernel, we descend
down this error path. 0 is a valid keyboard index, so leaving
vd->vd_keyboard at 0 when there's no keyboard found is objectively wrong as
later attachment of a keyboard will fail -- it gets index 0, and vt thinks
it's already using that keyboard.
This is decidedly the corniest of corner cases, but it's easy enough to get
correct that we should do so.
Tested in a kernel without atkbdc, atkbd, psm, kbdmux, ukbd, hyperv then
loading ukbd post-boot and attaching a usb keyboard.
Flip the knob added in r349154 to "enabled." The commit message from that
revision and associated code comment describe the rationale, implementation,
and motivation for the new default in detail. I have dog-fooded this
configuration on my own systems for six months, for what that's worth.
For end-users: the result is just as secure. The benefit is a faster, more
responsive system when processes produce significant demand on random(4).
As mentioned in the earlier commit, the prior behavior may be restored by
setting the kern.random.fortuna.concurrent_read="0" knob in loader.conf(5).
This scales the random generation side of random(4) somewhat, although there
is still a global mutex being shared by all cores and rand_harvestq; the
situation is generally much better than it was before on small CPU systems,
but do not expect miracles on 256-core systems running 256-thread full-rate
random(4) read. Work is ongoing to address both the generation-side (in
more depth) and the harvest-side scaling problems.
Approved by: csprng(delphij, markm)
Tested by: markm
Differential Revision: https://reviews.freebsd.org/D22879
The OpenCores I2C IP core can be found on any bus. Split out the PCI
bus specifics into their own file, only compiled on systems with PCI.
Reviewed by: kp
Sponsored by: Axiado
First reported against ESXi 5.0, PCI passthrough was not working due to
MSI-X issues. However, this issue was fixed via patch releases against
ESXi 5.5 and 6.0 in 2016. Given ESXi 5.5 and earlier have been EOL, this
patch removes the VMware MSI-X blacklist entries in the quirk table.
PR: 203874
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: VMware
Differential Revision: https://reviews.freebsd.org/D22819
The phy name may apparently be followed by a number in some systems.
Allow that.
PR: 242654
Reported and tested by: Marcel <marcel@brickporch.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Missing validation meant that it was possible to read 8 bytes beyond
the end of sfp_vpd_dump_buffer.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: delphij, ram
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22859
While a given ACPI device may have 0-N compatibility IDs, in practice most
seem to have 0 or 1. If one is present, emit it as part of the PNP info
string associated with a device. This could enable MODULE_PNP_INFO-based
automatic kldload for ACPI drivers associated with a given _CID (but without
a good _HID or _UID identifier).
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D22846
SIOCGAIRONET allows userspace to query an(4) for various device
properties and configuration, which appears to potentially include
sensitive information such as WEP keys (an(4) seems to predate WPA).
Also avoid races by copying in the request structure to a temporary
buffer before locking and modifying the device softc.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
It used to be required that a device be a child of gpiobus(4) to manipulate
gpio pins. That requirement didn't work well for FDT-based systems with many
cross-hierarchy users of gpio, so a more modern framework was created that
removed the old hierarchy requirement.
These changes adapt the owc_gpiobus driver to use the newer gpio_pin_*
functions to acquire, release, and manipulate gpio pins. This allows a
single driver to work for both hinted-attachment and fdt-based systems, and
removes the requirement that any one-wire fdt nodes must appear at the root
of the devicetree.
Differential Revision: https://reviews.freebsd.org/D22710
Nothing modifies these things, but const'ify out of an abundance of caution.
If we could const'ify the definition in each keyboard driver, I likely
would- improper mutations here can lead to misbehavior or slightly more
annoying to debug state.
This looks like a bit of debugging code that sliped into the initial
import of the new ATA framework. This changes the behavior to omit a
line of output that appears to have been intended for omission.
Reviewed by: mav
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22845
- PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL,
- & ~CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2);
was accidentally dropped from r355822 in the refactor. Restore it since 16-bit
cards may fail without it (some bridges autodetect this properly, so my laptop
worked when I tested it).
Noticed by: rpokala@
array with a singleton.
Also, pccbb isa attachment is never going to happen, do disconnect it from the
build (will delete this in future commit). It would need to be updated as well,
but since this code is effectively dead code, remove it from the build instead.
Keyboard drivers are generally registered via linker set. In these cases,
they're also available as kmods which use KPI for registering/unregistering
keyboard drivers outside of the linker set.
For built-in modules, we still fire off MOD_LOAD and maybe even MOD_UNLOAD
if an error occurs, leading to registration via linker set and at MOD_LOAD
time.
This is a minor optimization at best, but it keeps the internal kbd driver
tidy as a future change will merge the linker set driver list into its
internal keyboard_drivers list via SYSINIT and simplify driver lookup by
removing the need to consult the linker set.
This is needed after r355796. Some double-registration of kbd drivers needs
to be sorted out, then this sysinit will simply add these drivers into the
normal list and kill off any other bits in the driver that are aware of the
linker set, for simplicity.
The previous implementation relied on a kbdsw array that mirrored the global
keyboards array. This is fine, but also requires extra locking consideration
when accessing to ensure that it's not being resized as new keyboards are
added.
The extra pointer costs little in a struct that there are relatively few of
on any given system, and simplifies locking requirements ever-so-slightly as
we only need to consider the locking requirements of whichever method is
being invoked.
__FreeBSD_version is bumped as any kbd modules will need rebuilt following
this change.
Most keyboard drivers are using the genkbd implementations as it is;
formally use them for any that aren't set and make
genkbd_get_fkeystr/genkbd_diag private.
A future change will provide default implementations for some of these where
it makes sense and most of them are already using the genkbd
implementation (e.g. get_fkeystr, diag).
These invocations were directly calling enkbd_diag(), rather than
indirection back through kbdd_diag/kbdsw. While they're functionally
equivent, invoking kbdd_diag where feasible (i.e. not in a diag
implementation) makes it easier to visually identify locking needs in these
other drivers.
Don't hold the scheduler lock while doing context switches. Instead we
unlock after selecting the new thread and switch within a spinlock
section leaving interrupts and preemption disabled to prevent local
concurrency. This means that mi_switch() is entered with the thread
locked but returns without. This dramatically simplifies scheduler
locking because we will not hold the schedlock while spinning on
blocked lock in switch.
This change has not been made to 4BSD but in principle it would be
more straightforward.
Discussed with: markj
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22778
Eliminate recursion from most thread_lock consumers. Return from
sched_add() without the thread_lock held. This eliminates unnecessary
atomics and lock word loads as well as reducing the hold time for
scheduler locks. This will eventually allow for lockless remote adds.
Discussed with: kib
Reviewed by: jhb
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22626
Within command completion processing the callback function may access
DMAed data buffer. Synchronize it before use, not after.
This allows to use NVMe disk on non-DMA coherent arm64 system.
MFC after: 3 weeks
This #ifdef is misleading as there are actually no user-serviceable parts
inside and, as far as I can tell, there is no pollution leading from
userland to this header. Furthermore, it becomes a slight nuisance when
attempting to move things around in this header.
an exclusive object lock.
Previously swap space was freed on a best effort basis when a page that
had valid swap was dirtied, thus invalidating the swap copy. This may be
done inconsistently and requires the object lock which is not always
convenient.
Instead, track when swap space is present. The first dirty is responsible
for deleting space or setting PGA_SWAP_FREE which will trigger background
scans to free the swap space.
Simplify the locking in vm_fault_dirty() now that we can reliably identify
the first dirty.
Discussed with: alc, kib, markj
Differential Revision: https://reviews.freebsd.org/D22654
Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
CPL_TX_PKT_XT disables the internal parser on the chip and instead
relies on the driver to provide the exact length of the L2 and L3
headers. This allows hw checksumming and TSO to be used with L2 and
L3 encapsulations that the chip doesn't understand directly.
Note that netmap tx still uses the old CPL as it never uses the hw
to generate the checksum on tx.
Reviewed by: jhb@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22788
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
While there are subtle semantic differences between bool and boolean_t, none of
them matter in these cases. Prefer true/false when dealing with bool
type. Preserve a couple of TRUEs since they are passed into int args into CAM.
Preserve a couple of FALSEs when used for status.done, an int.
Differential Revision: https://reviews.freebsd.org/D20999
detach work and return the error. Especially don't call iicbus_reset()
since the most likely cause of failing to detach children is that one
of them has IO in progress.
This trims the boot time a bit more for AWS and other platforms that have nvme
drives. There's no reason too do this inline. This has been in my tree a while,
but IIRC I talked to Jim Harris about this at one of our face to face meetings.
MFC After: 2 weeks
Instead of first detaching the children(s) and then delete them,
use the device_delete_children function that does all of that.
MFC after: 1 month
Suggested by: ian
The driver used to always add the mmc device as it's child even
it no card was detected. Add a function that will detect if the
card is present or not and that will attach/detach the mmc device.
The function is either call on attach (as we won't have the interrupt
fired) or from two taskqueues. The first taskqueue will directly call
the function when the sdcard was present and is now removed and the other
one will delay a bit the attach when we didn't had a card and now have one.
This is mostly based on comments from the sdhci driver where it describe
a situation when the CD pin is detected before the others pins are connected.
MFC after: 1 month
This method will disable the regulators, clocks and assert the reset of
the module. It will also detach it's children (the mmc device) and release
it's resources.
While here enable the regulators on attach as we need them to power up
the sdcard or emmc.
MFC after: 1 month
