mirror of
https://github.com/opnsense/src.git
synced 2026-02-24 10:20:24 -05:00
up to date. Principle changes for this reelase is to support 2K Port Login firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only come with the 2K Port Login firmware. The 2322 should now work- but we don't have firmware sets for it in ispfw (as the change to load 2K Port Login f/w hasn't been made- that f/w is so big it has to be loaded in more than one chunk). Other changes are the beginnings of cleaning up some long standing target mode issues. The next changes here will incorporate a lot of bug fixes from others. Finally, some copyright cleanup and attempts to make the parts of the driver that are FreeBSD specific start conforming more to FreeBSD style. MFC after: 1 month
2111 lines
55 KiB
C
2111 lines
55 KiB
C
/*-
|
|
* PCI specific probe and attach routines for Qlogic ISP SCSI adapters.
|
|
* FreeBSD Version.
|
|
*
|
|
* Copyright (c) 1997-2006 by Matthew Jacob
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/stdint.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#ifdef ISP_TARGET_MODE
|
|
#ifdef PAE
|
|
#error "PAE and ISP_TARGET_MODE not supported yet"
|
|
#endif
|
|
#endif
|
|
|
|
#include <dev/isp/isp_freebsd.h>
|
|
|
|
static u_int16_t isp_pci_rd_reg(struct ispsoftc *, int);
|
|
static void isp_pci_wr_reg(struct ispsoftc *, int, u_int16_t);
|
|
static u_int16_t isp_pci_rd_reg_1080(struct ispsoftc *, int);
|
|
static void isp_pci_wr_reg_1080(struct ispsoftc *, int, u_int16_t);
|
|
static int
|
|
isp_pci_rd_isr(struct ispsoftc *, u_int16_t *, u_int16_t *, u_int16_t *);
|
|
static int
|
|
isp_pci_rd_isr_2300(struct ispsoftc *, u_int16_t *, u_int16_t *, u_int16_t *);
|
|
static int isp_pci_mbxdma(struct ispsoftc *);
|
|
static int
|
|
isp_pci_dmasetup(struct ispsoftc *, XS_T *, ispreq_t *, u_int16_t *, u_int16_t);
|
|
static void
|
|
isp_pci_dmateardown(struct ispsoftc *, XS_T *, u_int16_t);
|
|
|
|
static void isp_pci_reset1(struct ispsoftc *);
|
|
static void isp_pci_dumpregs(struct ispsoftc *, const char *);
|
|
|
|
static struct ispmdvec mdvec = {
|
|
isp_pci_rd_isr,
|
|
isp_pci_rd_reg,
|
|
isp_pci_wr_reg,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs,
|
|
NULL,
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64
|
|
};
|
|
|
|
static struct ispmdvec mdvec_1080 = {
|
|
isp_pci_rd_isr,
|
|
isp_pci_rd_reg_1080,
|
|
isp_pci_wr_reg_1080,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs,
|
|
NULL,
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64
|
|
};
|
|
|
|
static struct ispmdvec mdvec_12160 = {
|
|
isp_pci_rd_isr,
|
|
isp_pci_rd_reg_1080,
|
|
isp_pci_wr_reg_1080,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs,
|
|
NULL,
|
|
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64
|
|
};
|
|
|
|
static struct ispmdvec mdvec_2100 = {
|
|
isp_pci_rd_isr,
|
|
isp_pci_rd_reg,
|
|
isp_pci_wr_reg,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs
|
|
};
|
|
|
|
static struct ispmdvec mdvec_2200 = {
|
|
isp_pci_rd_isr,
|
|
isp_pci_rd_reg,
|
|
isp_pci_wr_reg,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs
|
|
};
|
|
|
|
static struct ispmdvec mdvec_2300 = {
|
|
isp_pci_rd_isr_2300,
|
|
isp_pci_rd_reg,
|
|
isp_pci_wr_reg,
|
|
isp_pci_mbxdma,
|
|
isp_pci_dmasetup,
|
|
isp_pci_dmateardown,
|
|
NULL,
|
|
isp_pci_reset1,
|
|
isp_pci_dumpregs
|
|
};
|
|
|
|
#ifndef PCIM_CMD_INVEN
|
|
#define PCIM_CMD_INVEN 0x10
|
|
#endif
|
|
#ifndef PCIM_CMD_BUSMASTEREN
|
|
#define PCIM_CMD_BUSMASTEREN 0x0004
|
|
#endif
|
|
#ifndef PCIM_CMD_PERRESPEN
|
|
#define PCIM_CMD_PERRESPEN 0x0040
|
|
#endif
|
|
#ifndef PCIM_CMD_SEREN
|
|
#define PCIM_CMD_SEREN 0x0100
|
|
#endif
|
|
|
|
#ifndef PCIR_COMMAND
|
|
#define PCIR_COMMAND 0x04
|
|
#endif
|
|
|
|
#ifndef PCIR_CACHELNSZ
|
|
#define PCIR_CACHELNSZ 0x0c
|
|
#endif
|
|
|
|
#ifndef PCIR_LATTIMER
|
|
#define PCIR_LATTIMER 0x0d
|
|
#endif
|
|
|
|
#ifndef PCIR_ROMADDR
|
|
#define PCIR_ROMADDR 0x30
|
|
#endif
|
|
|
|
#ifndef PCI_VENDOR_QLOGIC
|
|
#define PCI_VENDOR_QLOGIC 0x1077
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1020
|
|
#define PCI_PRODUCT_QLOGIC_ISP1020 0x1020
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1080
|
|
#define PCI_PRODUCT_QLOGIC_ISP1080 0x1080
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP10160
|
|
#define PCI_PRODUCT_QLOGIC_ISP10160 0x1016
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP12160
|
|
#define PCI_PRODUCT_QLOGIC_ISP12160 0x1216
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1240
|
|
#define PCI_PRODUCT_QLOGIC_ISP1240 0x1240
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP1280
|
|
#define PCI_PRODUCT_QLOGIC_ISP1280 0x1280
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2100
|
|
#define PCI_PRODUCT_QLOGIC_ISP2100 0x2100
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2200
|
|
#define PCI_PRODUCT_QLOGIC_ISP2200 0x2200
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2300
|
|
#define PCI_PRODUCT_QLOGIC_ISP2300 0x2300
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2312
|
|
#define PCI_PRODUCT_QLOGIC_ISP2312 0x2312
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP2322
|
|
#define PCI_PRODUCT_QLOGIC_ISP2322 0x2322
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_QLOGIC_ISP6312
|
|
#define PCI_PRODUCT_QLOGIC_ISP6312 0x6312
|
|
#endif
|
|
|
|
#define PCI_QLOGIC_ISP1020 \
|
|
((PCI_PRODUCT_QLOGIC_ISP1020 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP1080 \
|
|
((PCI_PRODUCT_QLOGIC_ISP1080 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP10160 \
|
|
((PCI_PRODUCT_QLOGIC_ISP10160 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP12160 \
|
|
((PCI_PRODUCT_QLOGIC_ISP12160 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP1240 \
|
|
((PCI_PRODUCT_QLOGIC_ISP1240 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP1280 \
|
|
((PCI_PRODUCT_QLOGIC_ISP1280 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP2100 \
|
|
((PCI_PRODUCT_QLOGIC_ISP2100 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP2200 \
|
|
((PCI_PRODUCT_QLOGIC_ISP2200 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP2300 \
|
|
((PCI_PRODUCT_QLOGIC_ISP2300 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP2312 \
|
|
((PCI_PRODUCT_QLOGIC_ISP2312 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP2322 \
|
|
((PCI_PRODUCT_QLOGIC_ISP2322 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
#define PCI_QLOGIC_ISP6312 \
|
|
((PCI_PRODUCT_QLOGIC_ISP6312 << 16) | PCI_VENDOR_QLOGIC)
|
|
|
|
/*
|
|
* Odd case for some AMI raid cards... We need to *not* attach to this.
|
|
*/
|
|
#define AMI_RAID_SUBVENDOR_ID 0x101e
|
|
|
|
#define IO_MAP_REG 0x10
|
|
#define MEM_MAP_REG 0x14
|
|
|
|
#define PCI_DFLT_LTNCY 0x40
|
|
#define PCI_DFLT_LNSZ 0x10
|
|
|
|
static int isp_pci_probe (device_t);
|
|
static int isp_pci_attach (device_t);
|
|
|
|
|
|
struct isp_pcisoftc {
|
|
struct ispsoftc pci_isp;
|
|
device_t pci_dev;
|
|
struct resource * pci_reg;
|
|
bus_space_tag_t pci_st;
|
|
bus_space_handle_t pci_sh;
|
|
void * ih;
|
|
int16_t pci_poff[_NREG_BLKS];
|
|
bus_dma_tag_t dmat;
|
|
bus_dmamap_t *dmaps;
|
|
};
|
|
extern ispfwfunc *isp_get_firmware_p;
|
|
|
|
static device_method_t isp_pci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, isp_pci_probe),
|
|
DEVMETHOD(device_attach, isp_pci_attach),
|
|
{ 0, 0 }
|
|
};
|
|
static void isp_pci_intr(void *);
|
|
|
|
static driver_t isp_pci_driver = {
|
|
"isp", isp_pci_methods, sizeof (struct isp_pcisoftc)
|
|
};
|
|
static devclass_t isp_devclass;
|
|
DRIVER_MODULE(isp, pci, isp_pci_driver, isp_devclass, 0, 0);
|
|
|
|
static int
|
|
isp_pci_probe(device_t dev)
|
|
{
|
|
switch ((pci_get_device(dev) << 16) | (pci_get_vendor(dev))) {
|
|
case PCI_QLOGIC_ISP1020:
|
|
device_set_desc(dev, "Qlogic ISP 1020/1040 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP1080:
|
|
device_set_desc(dev, "Qlogic ISP 1080 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP1240:
|
|
device_set_desc(dev, "Qlogic ISP 1240 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP1280:
|
|
device_set_desc(dev, "Qlogic ISP 1280 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP10160:
|
|
device_set_desc(dev, "Qlogic ISP 10160 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP12160:
|
|
if (pci_get_subvendor(dev) == AMI_RAID_SUBVENDOR_ID) {
|
|
return (ENXIO);
|
|
}
|
|
device_set_desc(dev, "Qlogic ISP 12160 PCI SCSI Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP2100:
|
|
device_set_desc(dev, "Qlogic ISP 2100 PCI FC-AL Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP2200:
|
|
device_set_desc(dev, "Qlogic ISP 2200 PCI FC-AL Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP2300:
|
|
device_set_desc(dev, "Qlogic ISP 2300 PCI FC-AL Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP2312:
|
|
device_set_desc(dev, "Qlogic ISP 2312 PCI FC-AL Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP2322:
|
|
device_set_desc(dev, "Qlogic ISP 2322 PCI FC-AL Adapter");
|
|
break;
|
|
case PCI_QLOGIC_ISP6312:
|
|
device_set_desc(dev, "Qlogic ISP 6312 PCI FC-AL Adapter");
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
if (isp_announced == 0 && bootverbose) {
|
|
printf("Qlogic ISP Driver, FreeBSD Version %d.%d, "
|
|
"Core Version %d.%d\n",
|
|
ISP_PLATFORM_VERSION_MAJOR, ISP_PLATFORM_VERSION_MINOR,
|
|
ISP_CORE_VERSION_MAJOR, ISP_CORE_VERSION_MINOR);
|
|
isp_announced++;
|
|
}
|
|
/*
|
|
* XXXX: Here is where we might load the f/w module
|
|
* XXXX: (or increase a reference count to it).
|
|
*/
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
isp_pci_attach(device_t dev)
|
|
{
|
|
struct resource *regs, *irq;
|
|
int tval, rtp, rgd, iqd, m1, m2, isp_debug, role;
|
|
u_int32_t data, cmd, linesz, psize, basetype;
|
|
struct isp_pcisoftc *pcs;
|
|
struct ispsoftc *isp = NULL;
|
|
struct ispmdvec *mdvp;
|
|
const char *sptr;
|
|
int locksetup = 0;
|
|
|
|
/*
|
|
* Figure out if we're supposed to skip this one.
|
|
*/
|
|
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"disable", &tval) == 0 && tval) {
|
|
device_printf(dev, "device is disabled\n");
|
|
/* but return 0 so the !$)$)*!$*) unit isn't reused */
|
|
return (0);
|
|
}
|
|
|
|
role = -1;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"role", &role) == 0 && role != -1) {
|
|
role &= (ISP_ROLE_INITIATOR|ISP_ROLE_TARGET);
|
|
device_printf(dev, "setting role to 0x%x\n", role);
|
|
} else {
|
|
#ifdef ISP_TARGET_MODE
|
|
role = ISP_ROLE_TARGET;
|
|
#else
|
|
role = ISP_DEFAULT_ROLES;
|
|
#endif
|
|
}
|
|
|
|
pcs = malloc(sizeof (struct isp_pcisoftc), M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (pcs == NULL) {
|
|
device_printf(dev, "cannot allocate softc\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/*
|
|
* Which we should try first - memory mapping or i/o mapping?
|
|
*
|
|
* We used to try memory first followed by i/o on alpha, otherwise
|
|
* the reverse, but we should just try memory first all the time now.
|
|
*/
|
|
m1 = PCIM_CMD_MEMEN;
|
|
m2 = PCIM_CMD_PORTEN;
|
|
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"prefer_iomap", &tval) == 0 && tval != 0) {
|
|
m1 = PCIM_CMD_PORTEN;
|
|
m2 = PCIM_CMD_MEMEN;
|
|
}
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"prefer_memmap", &tval) == 0 && tval != 0) {
|
|
m1 = PCIM_CMD_MEMEN;
|
|
m2 = PCIM_CMD_PORTEN;
|
|
}
|
|
|
|
linesz = PCI_DFLT_LNSZ;
|
|
irq = regs = NULL;
|
|
rgd = rtp = iqd = 0;
|
|
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
if (cmd & m1) {
|
|
rtp = (m1 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
|
|
rgd = (m1 == PCIM_CMD_MEMEN)? MEM_MAP_REG : IO_MAP_REG;
|
|
regs = bus_alloc_resource_any(dev, rtp, &rgd, RF_ACTIVE);
|
|
}
|
|
if (regs == NULL && (cmd & m2)) {
|
|
rtp = (m2 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
|
|
rgd = (m2 == PCIM_CMD_MEMEN)? MEM_MAP_REG : IO_MAP_REG;
|
|
regs = bus_alloc_resource_any(dev, rtp, &rgd, RF_ACTIVE);
|
|
}
|
|
if (regs == NULL) {
|
|
device_printf(dev, "unable to map any ports\n");
|
|
goto bad;
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "using %s space register mapping\n",
|
|
(rgd == IO_MAP_REG)? "I/O" : "Memory");
|
|
pcs->pci_dev = dev;
|
|
pcs->pci_reg = regs;
|
|
pcs->pci_st = rman_get_bustag(regs);
|
|
pcs->pci_sh = rman_get_bushandle(regs);
|
|
|
|
pcs->pci_poff[BIU_BLOCK >> _BLK_REG_SHFT] = BIU_REGS_OFF;
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] = PCI_MBOX_REGS_OFF;
|
|
pcs->pci_poff[SXP_BLOCK >> _BLK_REG_SHFT] = PCI_SXP_REGS_OFF;
|
|
pcs->pci_poff[RISC_BLOCK >> _BLK_REG_SHFT] = PCI_RISC_REGS_OFF;
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] = DMA_REGS_OFF;
|
|
mdvp = &mdvec;
|
|
basetype = ISP_HA_SCSI_UNKNOWN;
|
|
psize = sizeof (sdparam);
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1020) {
|
|
mdvp = &mdvec;
|
|
basetype = ISP_HA_SCSI_UNKNOWN;
|
|
psize = sizeof (sdparam);
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1080) {
|
|
mdvp = &mdvec_1080;
|
|
basetype = ISP_HA_SCSI_1080;
|
|
psize = sizeof (sdparam);
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
ISP1080_DMA_REGS_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1240) {
|
|
mdvp = &mdvec_1080;
|
|
basetype = ISP_HA_SCSI_1240;
|
|
psize = 2 * sizeof (sdparam);
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
ISP1080_DMA_REGS_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP1280) {
|
|
mdvp = &mdvec_1080;
|
|
basetype = ISP_HA_SCSI_1280;
|
|
psize = 2 * sizeof (sdparam);
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
ISP1080_DMA_REGS_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP10160) {
|
|
mdvp = &mdvec_12160;
|
|
basetype = ISP_HA_SCSI_10160;
|
|
psize = sizeof (sdparam);
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
ISP1080_DMA_REGS_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP12160) {
|
|
mdvp = &mdvec_12160;
|
|
basetype = ISP_HA_SCSI_12160;
|
|
psize = 2 * sizeof (sdparam);
|
|
pcs->pci_poff[DMA_BLOCK >> _BLK_REG_SHFT] =
|
|
ISP1080_DMA_REGS_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2100) {
|
|
mdvp = &mdvec_2100;
|
|
basetype = ISP_HA_FC_2100;
|
|
psize = sizeof (fcparam);
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
PCI_MBOX_REGS2100_OFF;
|
|
if (pci_get_revid(dev) < 3) {
|
|
/*
|
|
* XXX: Need to get the actual revision
|
|
* XXX: number of the 2100 FB. At any rate,
|
|
* XXX: lower cache line size for early revision
|
|
* XXX; boards.
|
|
*/
|
|
linesz = 1;
|
|
}
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2200) {
|
|
mdvp = &mdvec_2200;
|
|
basetype = ISP_HA_FC_2200;
|
|
psize = sizeof (fcparam);
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
PCI_MBOX_REGS2100_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2300) {
|
|
mdvp = &mdvec_2300;
|
|
basetype = ISP_HA_FC_2300;
|
|
psize = sizeof (fcparam);
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
PCI_MBOX_REGS2300_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2312 ||
|
|
pci_get_devid(dev) == PCI_QLOGIC_ISP6312) {
|
|
mdvp = &mdvec_2300;
|
|
basetype = ISP_HA_FC_2312;
|
|
psize = sizeof (fcparam);
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
PCI_MBOX_REGS2300_OFF;
|
|
}
|
|
if (pci_get_devid(dev) == PCI_QLOGIC_ISP2322) {
|
|
mdvp = &mdvec_2300;
|
|
basetype = ISP_HA_FC_2322;
|
|
psize = sizeof (fcparam);
|
|
pcs->pci_poff[MBOX_BLOCK >> _BLK_REG_SHFT] =
|
|
PCI_MBOX_REGS2300_OFF;
|
|
}
|
|
isp = &pcs->pci_isp;
|
|
isp->isp_param = malloc(psize, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (isp->isp_param == NULL) {
|
|
device_printf(dev, "cannot allocate parameter data\n");
|
|
goto bad;
|
|
}
|
|
isp->isp_mdvec = mdvp;
|
|
isp->isp_type = basetype;
|
|
isp->isp_revision = pci_get_revid(dev);
|
|
isp->isp_role = role;
|
|
isp->isp_dev = dev;
|
|
|
|
/*
|
|
* Try and find firmware for this device.
|
|
*/
|
|
|
|
/*
|
|
* Don't even attempt to get firmware for the 2322/2422 (yet)
|
|
*/
|
|
if (IS_2322(isp) == 0 && IS_24XX(isp) == 0 && isp_get_firmware_p) {
|
|
int device = (int) pci_get_device(dev);
|
|
#ifdef ISP_TARGET_MODE
|
|
(*isp_get_firmware_p)(0, 1, device, &mdvp->dv_ispfw);
|
|
#else
|
|
(*isp_get_firmware_p)(0, 0, device, &mdvp->dv_ispfw);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Make sure that SERR, PERR, WRITE INVALIDATE and BUSMASTER
|
|
* are set.
|
|
*/
|
|
cmd |= PCIM_CMD_SEREN | PCIM_CMD_PERRESPEN |
|
|
PCIM_CMD_BUSMASTEREN | PCIM_CMD_INVEN;
|
|
if (IS_2300(isp)) { /* per QLogic errata */
|
|
cmd &= ~PCIM_CMD_INVEN;
|
|
}
|
|
if (IS_23XX(isp)) {
|
|
/*
|
|
* Can't tell if ROM will hang on 'ABOUT FIRMWARE' command.
|
|
*/
|
|
isp->isp_touched = 1;
|
|
|
|
}
|
|
pci_write_config(dev, PCIR_COMMAND, cmd, 2);
|
|
|
|
/*
|
|
* Make sure the Cache Line Size register is set sensibly.
|
|
*/
|
|
data = pci_read_config(dev, PCIR_CACHELNSZ, 1);
|
|
if (data != linesz) {
|
|
data = PCI_DFLT_LNSZ;
|
|
isp_prt(isp, ISP_LOGCONFIG, "set PCI line size to %d", data);
|
|
pci_write_config(dev, PCIR_CACHELNSZ, data, 1);
|
|
}
|
|
|
|
/*
|
|
* Make sure the Latency Timer is sane.
|
|
*/
|
|
data = pci_read_config(dev, PCIR_LATTIMER, 1);
|
|
if (data < PCI_DFLT_LTNCY) {
|
|
data = PCI_DFLT_LTNCY;
|
|
isp_prt(isp, ISP_LOGCONFIG, "set PCI latency to %d", data);
|
|
pci_write_config(dev, PCIR_LATTIMER, data, 1);
|
|
}
|
|
|
|
/*
|
|
* Make sure we've disabled the ROM.
|
|
*/
|
|
data = pci_read_config(dev, PCIR_ROMADDR, 4);
|
|
data &= ~1;
|
|
pci_write_config(dev, PCIR_ROMADDR, data, 4);
|
|
|
|
iqd = 0;
|
|
irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &iqd,
|
|
RF_ACTIVE | RF_SHAREABLE);
|
|
if (irq == NULL) {
|
|
device_printf(dev, "could not allocate interrupt\n");
|
|
goto bad;
|
|
}
|
|
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"fwload_disable", &tval) == 0 && tval != 0) {
|
|
isp->isp_confopts |= ISP_CFG_NORELOAD;
|
|
}
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"ignore_nvram", &tval) == 0 && tval != 0) {
|
|
isp->isp_confopts |= ISP_CFG_NONVRAM;
|
|
}
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"fullduplex", &tval) == 0 && tval != 0) {
|
|
isp->isp_confopts |= ISP_CFG_FULL_DUPLEX;
|
|
}
|
|
#ifdef ISP_FW_CRASH_DUMP
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"fw_dump_enable", &tval) == 0 && tval != 0) {
|
|
size_t amt = 0;
|
|
if (IS_2200(isp)) {
|
|
amt = QLA2200_RISC_IMAGE_DUMP_SIZE;
|
|
} else if (IS_23XX(isp)) {
|
|
amt = QLA2300_RISC_IMAGE_DUMP_SIZE;
|
|
}
|
|
if (amt) {
|
|
FCPARAM(isp)->isp_dump_data =
|
|
malloc(amt, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
} else {
|
|
device_printf(dev,
|
|
"f/w crash dumps not supported for this model\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
sptr = 0;
|
|
if (resource_string_value(device_get_name(dev), device_get_unit(dev),
|
|
"topology", (const char **) &sptr) == 0 && sptr != 0) {
|
|
if (strcmp(sptr, "lport") == 0) {
|
|
isp->isp_confopts |= ISP_CFG_LPORT;
|
|
} else if (strcmp(sptr, "nport") == 0) {
|
|
isp->isp_confopts |= ISP_CFG_NPORT;
|
|
} else if (strcmp(sptr, "lport-only") == 0) {
|
|
isp->isp_confopts |= ISP_CFG_LPORT_ONLY;
|
|
} else if (strcmp(sptr, "nport-only") == 0) {
|
|
isp->isp_confopts |= ISP_CFG_NPORT_ONLY;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Because the resource_*_value functions can neither return
|
|
* 64 bit integer values, nor can they be directly coerced
|
|
* to interpret the right hand side of the assignment as
|
|
* you want them to interpret it, we have to force WWN
|
|
* hint replacement to specify WWN strings with a leading
|
|
* 'w' (e..g w50000000aaaa0001). Sigh.
|
|
*/
|
|
sptr = 0;
|
|
tval = resource_string_value(device_get_name(dev), device_get_unit(dev),
|
|
"portwwn", (const char **) &sptr);
|
|
if (tval == 0 && sptr != 0 && *sptr++ == 'w') {
|
|
char *eptr = 0;
|
|
isp->isp_osinfo.default_port_wwn = strtouq(sptr, &eptr, 16);
|
|
if (eptr < sptr + 16 || isp->isp_osinfo.default_port_wwn == 0) {
|
|
device_printf(dev, "mangled portwwn hint '%s'\n", sptr);
|
|
isp->isp_osinfo.default_port_wwn = 0;
|
|
} else {
|
|
isp->isp_confopts |= ISP_CFG_OWNWWPN;
|
|
}
|
|
}
|
|
if (isp->isp_osinfo.default_port_wwn == 0) {
|
|
isp->isp_osinfo.default_port_wwn = 0x400000007F000009ull;
|
|
}
|
|
|
|
sptr = 0;
|
|
tval = resource_string_value(device_get_name(dev), device_get_unit(dev),
|
|
"nodewwn", (const char **) &sptr);
|
|
if (tval == 0 && sptr != 0 && *sptr++ == 'w') {
|
|
char *eptr = 0;
|
|
isp->isp_osinfo.default_node_wwn = strtouq(sptr, &eptr, 16);
|
|
if (eptr < sptr + 16 || isp->isp_osinfo.default_node_wwn == 0) {
|
|
device_printf(dev, "mangled nodewwn hint '%s'\n", sptr);
|
|
isp->isp_osinfo.default_node_wwn = 0;
|
|
} else {
|
|
isp->isp_confopts |= ISP_CFG_OWNWWNN;
|
|
}
|
|
}
|
|
if (isp->isp_osinfo.default_node_wwn == 0) {
|
|
isp->isp_osinfo.default_node_wwn = 0x400000007F000009ull;
|
|
}
|
|
|
|
isp->isp_osinfo.default_id = -1;
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"iid", &tval) == 0) {
|
|
isp->isp_osinfo.default_id = tval;
|
|
isp->isp_confopts |= ISP_CFG_OWNLOOPID;
|
|
}
|
|
if (isp->isp_osinfo.default_id == -1) {
|
|
if (IS_FC(isp)) {
|
|
isp->isp_osinfo.default_id = 109;
|
|
} else {
|
|
isp->isp_osinfo.default_id = 7;
|
|
}
|
|
}
|
|
|
|
isp_debug = 0;
|
|
(void) resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"debug", &isp_debug);
|
|
|
|
/* Make sure the lock is set up. */
|
|
mtx_init(&isp->isp_osinfo.lock, "isp", NULL, MTX_DEF);
|
|
locksetup++;
|
|
|
|
if (bus_setup_intr(dev, irq, ISP_IFLAGS, isp_pci_intr, isp, &pcs->ih)) {
|
|
device_printf(dev, "could not setup interrupt\n");
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* Set up logging levels.
|
|
*/
|
|
if (isp_debug) {
|
|
isp->isp_dblev = isp_debug;
|
|
} else {
|
|
isp->isp_dblev = ISP_LOGWARN|ISP_LOGERR;
|
|
}
|
|
if (bootverbose)
|
|
isp->isp_dblev |= ISP_LOGCONFIG|ISP_LOGINFO;
|
|
|
|
/*
|
|
* Last minute checks...
|
|
*/
|
|
if (IS_23XX(isp)) {
|
|
isp->isp_port = pci_get_function(dev);
|
|
}
|
|
|
|
/*
|
|
* Make sure we're in reset state.
|
|
*/
|
|
ISP_LOCK(isp);
|
|
isp_reset(isp);
|
|
if (isp->isp_state != ISP_RESETSTATE) {
|
|
ISP_UNLOCK(isp);
|
|
goto bad;
|
|
}
|
|
isp_init(isp);
|
|
if (isp->isp_role != ISP_ROLE_NONE && isp->isp_state != ISP_INITSTATE) {
|
|
isp_uninit(isp);
|
|
ISP_UNLOCK(isp);
|
|
goto bad;
|
|
}
|
|
isp_attach(isp);
|
|
if (isp->isp_role != ISP_ROLE_NONE && isp->isp_state != ISP_RUNSTATE) {
|
|
isp_uninit(isp);
|
|
ISP_UNLOCK(isp);
|
|
goto bad;
|
|
}
|
|
/*
|
|
* XXXX: Here is where we might unload the f/w module
|
|
* XXXX: (or decrease the reference count to it).
|
|
*/
|
|
ISP_UNLOCK(isp);
|
|
return (0);
|
|
|
|
bad:
|
|
|
|
if (pcs && pcs->ih) {
|
|
(void) bus_teardown_intr(dev, irq, pcs->ih);
|
|
}
|
|
|
|
if (locksetup && isp) {
|
|
mtx_destroy(&isp->isp_osinfo.lock);
|
|
}
|
|
|
|
if (irq) {
|
|
(void) bus_release_resource(dev, SYS_RES_IRQ, iqd, irq);
|
|
}
|
|
|
|
|
|
if (regs) {
|
|
(void) bus_release_resource(dev, rtp, rgd, regs);
|
|
}
|
|
|
|
if (pcs) {
|
|
if (pcs->pci_isp.isp_param)
|
|
free(pcs->pci_isp.isp_param, M_DEVBUF);
|
|
free(pcs, M_DEVBUF);
|
|
}
|
|
|
|
/*
|
|
* XXXX: Here is where we might unload the f/w module
|
|
* XXXX: (or decrease the reference count to it).
|
|
*/
|
|
return (ENXIO);
|
|
}
|
|
|
|
static void
|
|
isp_pci_intr(void *arg)
|
|
{
|
|
struct ispsoftc *isp = arg;
|
|
u_int16_t isr, sema, mbox;
|
|
|
|
ISP_LOCK(isp);
|
|
isp->isp_intcnt++;
|
|
if (ISP_READ_ISR(isp, &isr, &sema, &mbox) == 0) {
|
|
isp->isp_intbogus++;
|
|
} else {
|
|
int iok = isp->isp_osinfo.intsok;
|
|
isp->isp_osinfo.intsok = 0;
|
|
isp_intr(isp, isr, sema, mbox);
|
|
isp->isp_osinfo.intsok = iok;
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
}
|
|
|
|
|
|
#define IspVirt2Off(a, x) \
|
|
(((struct isp_pcisoftc *)a)->pci_poff[((x) & _BLK_REG_MASK) >> \
|
|
_BLK_REG_SHFT] + ((x) & 0xff))
|
|
|
|
#define BXR2(pcs, off) \
|
|
bus_space_read_2(pcs->pci_st, pcs->pci_sh, off)
|
|
#define BXW2(pcs, off, v) \
|
|
bus_space_write_2(pcs->pci_st, pcs->pci_sh, off, v)
|
|
|
|
|
|
static INLINE int
|
|
isp_pci_rd_debounced(struct ispsoftc *isp, int off, u_int16_t *rp)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
u_int16_t val0, val1;
|
|
int i = 0;
|
|
|
|
do {
|
|
val0 = BXR2(pcs, IspVirt2Off(isp, off));
|
|
val1 = BXR2(pcs, IspVirt2Off(isp, off));
|
|
} while (val0 != val1 && ++i < 1000);
|
|
if (val0 != val1) {
|
|
return (1);
|
|
}
|
|
*rp = val0;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
isp_pci_rd_isr(struct ispsoftc *isp, u_int16_t *isrp,
|
|
u_int16_t *semap, u_int16_t *mbp)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
u_int16_t isr, sema;
|
|
|
|
if (IS_2100(isp)) {
|
|
if (isp_pci_rd_debounced(isp, BIU_ISR, &isr)) {
|
|
return (0);
|
|
}
|
|
if (isp_pci_rd_debounced(isp, BIU_SEMA, &sema)) {
|
|
return (0);
|
|
}
|
|
} else {
|
|
isr = BXR2(pcs, IspVirt2Off(isp, BIU_ISR));
|
|
sema = BXR2(pcs, IspVirt2Off(isp, BIU_SEMA));
|
|
}
|
|
isp_prt(isp, ISP_LOGDEBUG3, "ISR 0x%x SEMA 0x%x", isr, sema);
|
|
isr &= INT_PENDING_MASK(isp);
|
|
sema &= BIU_SEMA_LOCK;
|
|
if (isr == 0 && sema == 0) {
|
|
return (0);
|
|
}
|
|
*isrp = isr;
|
|
if ((*semap = sema) != 0) {
|
|
if (IS_2100(isp)) {
|
|
if (isp_pci_rd_debounced(isp, OUTMAILBOX0, mbp)) {
|
|
return (0);
|
|
}
|
|
} else {
|
|
*mbp = BXR2(pcs, IspVirt2Off(isp, OUTMAILBOX0));
|
|
}
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
isp_pci_rd_isr_2300(struct ispsoftc *isp, u_int16_t *isrp,
|
|
u_int16_t *semap, u_int16_t *mbox0p)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
u_int32_t r2hisr;
|
|
|
|
if (!(BXR2(pcs, IspVirt2Off(isp, BIU_ISR) & BIU2100_ISR_RISC_INT))) {
|
|
*isrp = 0;
|
|
return (0);
|
|
}
|
|
r2hisr = bus_space_read_4(pcs->pci_st, pcs->pci_sh,
|
|
IspVirt2Off(pcs, BIU_R2HSTSLO));
|
|
isp_prt(isp, ISP_LOGDEBUG3, "RISC2HOST ISR 0x%x", r2hisr);
|
|
if ((r2hisr & BIU_R2HST_INTR) == 0) {
|
|
*isrp = 0;
|
|
return (0);
|
|
}
|
|
switch (r2hisr & BIU_R2HST_ISTAT_MASK) {
|
|
case ISPR2HST_ROM_MBX_OK:
|
|
case ISPR2HST_ROM_MBX_FAIL:
|
|
case ISPR2HST_MBX_OK:
|
|
case ISPR2HST_MBX_FAIL:
|
|
case ISPR2HST_ASYNC_EVENT:
|
|
*isrp = r2hisr & 0xffff;
|
|
*mbox0p = (r2hisr >> 16);
|
|
*semap = 1;
|
|
return (1);
|
|
case ISPR2HST_RIO_16:
|
|
*isrp = r2hisr & 0xffff;
|
|
*mbox0p = ASYNC_RIO1;
|
|
*semap = 1;
|
|
return (1);
|
|
case ISPR2HST_FPOST:
|
|
*isrp = r2hisr & 0xffff;
|
|
*mbox0p = ASYNC_CMD_CMPLT;
|
|
*semap = 1;
|
|
return (1);
|
|
case ISPR2HST_FPOST_CTIO:
|
|
*isrp = r2hisr & 0xffff;
|
|
*mbox0p = ASYNC_CTIO_DONE;
|
|
*semap = 1;
|
|
return (1);
|
|
case ISPR2HST_RSPQ_UPDATE:
|
|
*isrp = r2hisr & 0xffff;
|
|
*mbox0p = 0;
|
|
*semap = 0;
|
|
return (1);
|
|
default:
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
static u_int16_t
|
|
isp_pci_rd_reg(struct ispsoftc *isp, int regoff)
|
|
{
|
|
u_int16_t rv;
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
int oldconf = 0;
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
/*
|
|
* We will assume that someone has paused the RISC processor.
|
|
*/
|
|
oldconf = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1),
|
|
oldconf | BIU_PCI_CONF1_SXP);
|
|
}
|
|
rv = BXR2(pcs, IspVirt2Off(isp, regoff));
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), oldconf);
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
static void
|
|
isp_pci_wr_reg(struct ispsoftc *isp, int regoff, u_int16_t val)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
int oldconf = 0;
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
/*
|
|
* We will assume that someone has paused the RISC processor.
|
|
*/
|
|
oldconf = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1),
|
|
oldconf | BIU_PCI_CONF1_SXP);
|
|
}
|
|
BXW2(pcs, IspVirt2Off(isp, regoff), val);
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK) {
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), oldconf);
|
|
}
|
|
}
|
|
|
|
static u_int16_t
|
|
isp_pci_rd_reg_1080(struct ispsoftc *isp, int regoff)
|
|
{
|
|
u_int16_t rv, oc = 0;
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK ||
|
|
(regoff & _BLK_REG_MASK) == (SXP_BLOCK|SXP_BANK1_SELECT)) {
|
|
u_int16_t tc;
|
|
/*
|
|
* We will assume that someone has paused the RISC processor.
|
|
*/
|
|
oc = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
tc = oc & ~BIU_PCI1080_CONF1_DMA;
|
|
if (regoff & SXP_BANK1_SELECT)
|
|
tc |= BIU_PCI1080_CONF1_SXP1;
|
|
else
|
|
tc |= BIU_PCI1080_CONF1_SXP0;
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), tc);
|
|
} else if ((regoff & _BLK_REG_MASK) == DMA_BLOCK) {
|
|
oc = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1),
|
|
oc | BIU_PCI1080_CONF1_DMA);
|
|
}
|
|
rv = BXR2(pcs, IspVirt2Off(isp, regoff));
|
|
if (oc) {
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), oc);
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
static void
|
|
isp_pci_wr_reg_1080(struct ispsoftc *isp, int regoff, u_int16_t val)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *) isp;
|
|
int oc = 0;
|
|
|
|
if ((regoff & _BLK_REG_MASK) == SXP_BLOCK ||
|
|
(regoff & _BLK_REG_MASK) == (SXP_BLOCK|SXP_BANK1_SELECT)) {
|
|
u_int16_t tc;
|
|
/*
|
|
* We will assume that someone has paused the RISC processor.
|
|
*/
|
|
oc = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
tc = oc & ~BIU_PCI1080_CONF1_DMA;
|
|
if (regoff & SXP_BANK1_SELECT)
|
|
tc |= BIU_PCI1080_CONF1_SXP1;
|
|
else
|
|
tc |= BIU_PCI1080_CONF1_SXP0;
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), tc);
|
|
} else if ((regoff & _BLK_REG_MASK) == DMA_BLOCK) {
|
|
oc = BXR2(pcs, IspVirt2Off(isp, BIU_CONF1));
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1),
|
|
oc | BIU_PCI1080_CONF1_DMA);
|
|
}
|
|
BXW2(pcs, IspVirt2Off(isp, regoff), val);
|
|
if (oc) {
|
|
BXW2(pcs, IspVirt2Off(isp, BIU_CONF1), oc);
|
|
}
|
|
}
|
|
|
|
|
|
struct imush {
|
|
struct ispsoftc *isp;
|
|
int error;
|
|
};
|
|
|
|
static void imc(void *, bus_dma_segment_t *, int, int);
|
|
|
|
static void
|
|
imc(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct imush *imushp = (struct imush *) arg;
|
|
if (error) {
|
|
imushp->error = error;
|
|
} else {
|
|
struct ispsoftc *isp =imushp->isp;
|
|
bus_addr_t addr = segs->ds_addr;
|
|
|
|
isp->isp_rquest_dma = addr;
|
|
addr += ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
|
|
isp->isp_result_dma = addr;
|
|
if (IS_FC(isp)) {
|
|
addr += ISP_QUEUE_SIZE(RESULT_QUEUE_LEN(isp));
|
|
FCPARAM(isp)->isp_scdma = addr;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Should be BUS_SPACE_MAXSIZE, but MAXPHYS is larger than BUS_SPACE_MAXSIZE
|
|
*/
|
|
#define ISP_NSEGS ((MAXPHYS / PAGE_SIZE) + 1)
|
|
|
|
static int
|
|
isp_pci_mbxdma(struct ispsoftc *isp)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *)isp;
|
|
caddr_t base;
|
|
u_int32_t len;
|
|
int i, error, ns;
|
|
bus_size_t alim, slim, xlim;
|
|
struct imush im;
|
|
|
|
/*
|
|
* Already been here? If so, leave...
|
|
*/
|
|
if (isp->isp_rquest) {
|
|
return (0);
|
|
}
|
|
|
|
#ifdef ISP_DAC_SUPPORTED
|
|
alim = BUS_SPACE_UNRESTRICTED;
|
|
xlim = BUS_SPACE_MAXADDR_32BIT;
|
|
#else
|
|
xlim = alim = BUS_SPACE_MAXADDR_32BIT;
|
|
#endif
|
|
if (IS_ULTRA2(isp) || IS_FC(isp) || IS_1240(isp)) {
|
|
slim = BUS_SPACE_MAXADDR_32BIT;
|
|
} else {
|
|
slim = BUS_SPACE_MAXADDR_24BIT;
|
|
}
|
|
|
|
ISP_UNLOCK(isp);
|
|
if (bus_dma_tag_create(NULL, 1, slim+1, alim, alim,
|
|
NULL, NULL, BUS_SPACE_MAXSIZE, ISP_NSEGS, slim, 0,
|
|
busdma_lock_mutex, &Giant, &pcs->dmat)) {
|
|
isp_prt(isp, ISP_LOGERR, "could not create master dma tag");
|
|
ISP_LOCK(isp);
|
|
return(1);
|
|
}
|
|
|
|
|
|
len = sizeof (XS_T **) * isp->isp_maxcmds;
|
|
isp->isp_xflist = (XS_T **) malloc(len, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
if (isp->isp_xflist == NULL) {
|
|
isp_prt(isp, ISP_LOGERR, "cannot alloc xflist array");
|
|
ISP_LOCK(isp);
|
|
return (1);
|
|
}
|
|
#ifdef ISP_TARGET_MODE
|
|
len = sizeof (void **) * isp->isp_maxcmds;
|
|
isp->isp_tgtlist = (void **) malloc(len, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
if (isp->isp_tgtlist == NULL) {
|
|
isp_prt(isp, ISP_LOGERR, "cannot alloc tgtlist array");
|
|
ISP_LOCK(isp);
|
|
return (1);
|
|
}
|
|
#endif
|
|
len = sizeof (bus_dmamap_t) * isp->isp_maxcmds;
|
|
pcs->dmaps = (bus_dmamap_t *) malloc(len, M_DEVBUF, M_WAITOK);
|
|
if (pcs->dmaps == NULL) {
|
|
isp_prt(isp, ISP_LOGERR, "can't alloc dma map storage");
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
#ifdef ISP_TARGET_MODE
|
|
free(isp->isp_tgtlist, M_DEVBUF);
|
|
#endif
|
|
ISP_LOCK(isp);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Allocate and map the request, result queues, plus FC scratch area.
|
|
*/
|
|
len = ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
|
|
len += ISP_QUEUE_SIZE(RESULT_QUEUE_LEN(isp));
|
|
if (IS_FC(isp)) {
|
|
len += ISP2100_SCRLEN;
|
|
}
|
|
|
|
ns = (len / PAGE_SIZE) + 1;
|
|
if (bus_dma_tag_create(pcs->dmat, QENTRY_LEN, slim+1, xlim, xlim,
|
|
NULL, NULL, len, ns, slim, 0, busdma_lock_mutex, &Giant,
|
|
&isp->isp_cdmat)) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"cannot create a dma tag for control spaces");
|
|
free(pcs->dmaps, M_DEVBUF);
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
#ifdef ISP_TARGET_MODE
|
|
free(isp->isp_tgtlist, M_DEVBUF);
|
|
#endif
|
|
ISP_LOCK(isp);
|
|
return (1);
|
|
}
|
|
|
|
if (bus_dmamem_alloc(isp->isp_cdmat, (void **)&base, BUS_DMA_NOWAIT,
|
|
&isp->isp_cdmap) != 0) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"cannot allocate %d bytes of CCB memory", len);
|
|
bus_dma_tag_destroy(isp->isp_cdmat);
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
#ifdef ISP_TARGET_MODE
|
|
free(isp->isp_tgtlist, M_DEVBUF);
|
|
#endif
|
|
free(pcs->dmaps, M_DEVBUF);
|
|
ISP_LOCK(isp);
|
|
return (1);
|
|
}
|
|
|
|
for (i = 0; i < isp->isp_maxcmds; i++) {
|
|
error = bus_dmamap_create(pcs->dmat, 0, &pcs->dmaps[i]);
|
|
if (error) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"error %d creating per-cmd DMA maps", error);
|
|
while (--i >= 0) {
|
|
bus_dmamap_destroy(pcs->dmat, pcs->dmaps[i]);
|
|
}
|
|
goto bad;
|
|
}
|
|
}
|
|
|
|
im.isp = isp;
|
|
im.error = 0;
|
|
bus_dmamap_load(isp->isp_cdmat, isp->isp_cdmap, base, len, imc, &im, 0);
|
|
if (im.error) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"error %d loading dma map for control areas", im.error);
|
|
goto bad;
|
|
}
|
|
|
|
isp->isp_rquest = base;
|
|
base += ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
|
|
isp->isp_result = base;
|
|
if (IS_FC(isp)) {
|
|
base += ISP_QUEUE_SIZE(RESULT_QUEUE_LEN(isp));
|
|
FCPARAM(isp)->isp_scratch = base;
|
|
}
|
|
ISP_LOCK(isp);
|
|
return (0);
|
|
|
|
bad:
|
|
bus_dmamem_free(isp->isp_cdmat, base, isp->isp_cdmap);
|
|
bus_dma_tag_destroy(isp->isp_cdmat);
|
|
free(isp->isp_xflist, M_DEVBUF);
|
|
#ifdef ISP_TARGET_MODE
|
|
free(isp->isp_tgtlist, M_DEVBUF);
|
|
#endif
|
|
free(pcs->dmaps, M_DEVBUF);
|
|
ISP_LOCK(isp);
|
|
isp->isp_rquest = NULL;
|
|
return (1);
|
|
}
|
|
|
|
typedef struct {
|
|
struct ispsoftc *isp;
|
|
void *cmd_token;
|
|
void *rq;
|
|
u_int16_t *nxtip;
|
|
u_int16_t optr;
|
|
u_int error;
|
|
} mush_t;
|
|
|
|
#define MUSHERR_NOQENTRIES -2
|
|
|
|
#ifdef ISP_TARGET_MODE
|
|
/*
|
|
* We need to handle DMA for target mode differently from initiator mode.
|
|
*
|
|
* DMA mapping and construction and submission of CTIO Request Entries
|
|
* and rendevous for completion are very tightly coupled because we start
|
|
* out by knowing (per platform) how much data we have to move, but we
|
|
* don't know, up front, how many DMA mapping segments will have to be used
|
|
* cover that data, so we don't know how many CTIO Request Entries we
|
|
* will end up using. Further, for performance reasons we may want to
|
|
* (on the last CTIO for Fibre Channel), send status too (if all went well).
|
|
*
|
|
* The standard vector still goes through isp_pci_dmasetup, but the callback
|
|
* for the DMA mapping routines comes here instead with the whole transfer
|
|
* mapped and a pointer to a partially filled in already allocated request
|
|
* queue entry. We finish the job.
|
|
*/
|
|
static void tdma_mk(void *, bus_dma_segment_t *, int, int);
|
|
static void tdma_mkfc(void *, bus_dma_segment_t *, int, int);
|
|
|
|
#define STATUS_WITH_DATA 1
|
|
|
|
static void
|
|
tdma_mk(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
{
|
|
mush_t *mp;
|
|
struct ccb_scsiio *csio;
|
|
struct ispsoftc *isp;
|
|
struct isp_pcisoftc *pcs;
|
|
bus_dmamap_t *dp;
|
|
ct_entry_t *cto, *qe;
|
|
u_int8_t scsi_status;
|
|
u_int16_t curi, nxti, handle;
|
|
u_int32_t sflags;
|
|
int32_t resid;
|
|
int nth_ctio, nctios, send_status;
|
|
|
|
mp = (mush_t *) arg;
|
|
if (error) {
|
|
mp->error = error;
|
|
return;
|
|
}
|
|
|
|
isp = mp->isp;
|
|
csio = mp->cmd_token;
|
|
cto = mp->rq;
|
|
curi = isp->isp_reqidx;
|
|
qe = (ct_entry_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, curi);
|
|
|
|
cto->ct_xfrlen = 0;
|
|
cto->ct_seg_count = 0;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
MEMZERO(cto->ct_dataseg, sizeof(cto->ct_dataseg));
|
|
|
|
if (nseg == 0) {
|
|
cto->ct_header.rqs_seqno = 1;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO[%x] lun%d iid%d tag %x flgs %x sts %x ssts %x res %d",
|
|
cto->ct_fwhandle, csio->ccb_h.target_lun, cto->ct_iid,
|
|
cto->ct_tag_val, cto->ct_flags, cto->ct_status,
|
|
cto->ct_scsi_status, cto->ct_resid);
|
|
ISP_TDQE(isp, "tdma_mk[no data]", curi, cto);
|
|
isp_put_ctio(isp, cto, qe);
|
|
return;
|
|
}
|
|
|
|
nctios = nseg / ISP_RQDSEG;
|
|
if (nseg % ISP_RQDSEG) {
|
|
nctios++;
|
|
}
|
|
|
|
/*
|
|
* Save syshandle, and potentially any SCSI status, which we'll
|
|
* reinsert on the last CTIO we're going to send.
|
|
*/
|
|
|
|
handle = cto->ct_syshandle;
|
|
cto->ct_syshandle = 0;
|
|
cto->ct_header.rqs_seqno = 0;
|
|
send_status = (cto->ct_flags & CT_SENDSTATUS) != 0;
|
|
|
|
if (send_status) {
|
|
sflags = cto->ct_flags & (CT_SENDSTATUS | CT_CCINCR);
|
|
cto->ct_flags &= ~(CT_SENDSTATUS | CT_CCINCR);
|
|
/*
|
|
* Preserve residual.
|
|
*/
|
|
resid = cto->ct_resid;
|
|
|
|
/*
|
|
* Save actual SCSI status.
|
|
*/
|
|
scsi_status = cto->ct_scsi_status;
|
|
|
|
#ifndef STATUS_WITH_DATA
|
|
sflags |= CT_NO_DATA;
|
|
/*
|
|
* We can't do a status at the same time as a data CTIO, so
|
|
* we need to synthesize an extra CTIO at this level.
|
|
*/
|
|
nctios++;
|
|
#endif
|
|
} else {
|
|
sflags = scsi_status = resid = 0;
|
|
}
|
|
|
|
cto->ct_resid = 0;
|
|
cto->ct_scsi_status = 0;
|
|
|
|
pcs = (struct isp_pcisoftc *)isp;
|
|
dp = &pcs->dmaps[isp_handle_index(handle)];
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
} else {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
nxti = *mp->nxtip;
|
|
|
|
for (nth_ctio = 0; nth_ctio < nctios; nth_ctio++) {
|
|
int seglim;
|
|
|
|
seglim = nseg;
|
|
if (seglim) {
|
|
int seg;
|
|
|
|
if (seglim > ISP_RQDSEG)
|
|
seglim = ISP_RQDSEG;
|
|
|
|
for (seg = 0; seg < seglim; seg++, nseg--) {
|
|
/*
|
|
* Unlike normal initiator commands, we don't
|
|
* do any swizzling here.
|
|
*/
|
|
cto->ct_dataseg[seg].ds_count = dm_segs->ds_len;
|
|
cto->ct_dataseg[seg].ds_base = dm_segs->ds_addr;
|
|
cto->ct_xfrlen += dm_segs->ds_len;
|
|
dm_segs++;
|
|
}
|
|
cto->ct_seg_count = seg;
|
|
} else {
|
|
/*
|
|
* This case should only happen when we're sending an
|
|
* extra CTIO with final status.
|
|
*/
|
|
if (send_status == 0) {
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
"tdma_mk ran out of segments");
|
|
mp->error = EINVAL;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* At this point, the fields ct_lun, ct_iid, ct_tagval,
|
|
* ct_tagtype, and ct_timeout have been carried over
|
|
* unchanged from what our caller had set.
|
|
*
|
|
* The dataseg fields and the seg_count fields we just got
|
|
* through setting. The data direction we've preserved all
|
|
* along and only clear it if we're now sending status.
|
|
*/
|
|
|
|
if (nth_ctio == nctios - 1) {
|
|
/*
|
|
* We're the last in a sequence of CTIOs, so mark
|
|
* this CTIO and save the handle to the CCB such that
|
|
* when this CTIO completes we can free dma resources
|
|
* and do whatever else we need to do to finish the
|
|
* rest of the command. We *don't* give this to the
|
|
* firmware to work on- the caller will do that.
|
|
*/
|
|
|
|
cto->ct_syshandle = handle;
|
|
cto->ct_header.rqs_seqno = 1;
|
|
|
|
if (send_status) {
|
|
cto->ct_scsi_status = scsi_status;
|
|
cto->ct_flags |= sflags;
|
|
cto->ct_resid = resid;
|
|
}
|
|
if (send_status) {
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO[%x] lun%d iid %d tag %x ct_flags %x "
|
|
"scsi status %x resid %d",
|
|
cto->ct_fwhandle, csio->ccb_h.target_lun,
|
|
cto->ct_iid, cto->ct_tag_val, cto->ct_flags,
|
|
cto->ct_scsi_status, cto->ct_resid);
|
|
} else {
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO[%x] lun%d iid%d tag %x ct_flags 0x%x",
|
|
cto->ct_fwhandle, csio->ccb_h.target_lun,
|
|
cto->ct_iid, cto->ct_tag_val,
|
|
cto->ct_flags);
|
|
}
|
|
isp_put_ctio(isp, cto, qe);
|
|
ISP_TDQE(isp, "last tdma_mk", curi, cto);
|
|
if (nctios > 1) {
|
|
MEMORYBARRIER(isp, SYNC_REQUEST,
|
|
curi, QENTRY_LEN);
|
|
}
|
|
} else {
|
|
ct_entry_t *oqe = qe;
|
|
|
|
/*
|
|
* Make sure syshandle fields are clean
|
|
*/
|
|
cto->ct_syshandle = 0;
|
|
cto->ct_header.rqs_seqno = 0;
|
|
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO[%x] lun%d for ID%d ct_flags 0x%x",
|
|
cto->ct_fwhandle, csio->ccb_h.target_lun,
|
|
cto->ct_iid, cto->ct_flags);
|
|
|
|
/*
|
|
* Get a new CTIO
|
|
*/
|
|
qe = (ct_entry_t *)
|
|
ISP_QUEUE_ENTRY(isp->isp_rquest, nxti);
|
|
nxti = ISP_NXT_QENTRY(nxti, RQUEST_QUEUE_LEN(isp));
|
|
if (nxti == mp->optr) {
|
|
isp_prt(isp, ISP_LOGTDEBUG0,
|
|
"Queue Overflow in tdma_mk");
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Now that we're done with the old CTIO,
|
|
* flush it out to the request queue.
|
|
*/
|
|
ISP_TDQE(isp, "dma_tgt_fc", curi, cto);
|
|
isp_put_ctio(isp, cto, oqe);
|
|
if (nth_ctio != 0) {
|
|
MEMORYBARRIER(isp, SYNC_REQUEST, curi,
|
|
QENTRY_LEN);
|
|
}
|
|
curi = ISP_NXT_QENTRY(curi, RQUEST_QUEUE_LEN(isp));
|
|
|
|
/*
|
|
* Reset some fields in the CTIO so we can reuse
|
|
* for the next one we'll flush to the request
|
|
* queue.
|
|
*/
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
cto->ct_header.rqs_flags = 0;
|
|
cto->ct_status = 0;
|
|
cto->ct_scsi_status = 0;
|
|
cto->ct_xfrlen = 0;
|
|
cto->ct_resid = 0;
|
|
cto->ct_seg_count = 0;
|
|
MEMZERO(cto->ct_dataseg, sizeof(cto->ct_dataseg));
|
|
}
|
|
}
|
|
*mp->nxtip = nxti;
|
|
}
|
|
|
|
/*
|
|
* We don't have to do multiple CTIOs here. Instead, we can just do
|
|
* continuation segments as needed. This greatly simplifies the code
|
|
* improves performance.
|
|
*/
|
|
|
|
static void
|
|
tdma_mkfc(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
{
|
|
mush_t *mp;
|
|
struct ccb_scsiio *csio;
|
|
struct ispsoftc *isp;
|
|
ct2_entry_t *cto, *qe;
|
|
u_int16_t curi, nxti;
|
|
int segcnt;
|
|
|
|
mp = (mush_t *) arg;
|
|
if (error) {
|
|
mp->error = error;
|
|
return;
|
|
}
|
|
|
|
isp = mp->isp;
|
|
csio = mp->cmd_token;
|
|
cto = mp->rq;
|
|
|
|
curi = isp->isp_reqidx;
|
|
qe = (ct2_entry_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, curi);
|
|
|
|
if (nseg == 0) {
|
|
if ((cto->ct_flags & CT2_FLAG_MMASK) != CT2_FLAG_MODE1) {
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
"dma2_tgt_fc, a status CTIO2 without MODE1 "
|
|
"set (0x%x)", cto->ct_flags);
|
|
mp->error = EINVAL;
|
|
return;
|
|
}
|
|
/*
|
|
* We preserve ct_lun, ct_iid, ct_rxid. We set the data
|
|
* flags to NO DATA and clear relative offset flags.
|
|
* We preserve the ct_resid and the response area.
|
|
*/
|
|
cto->ct_header.rqs_seqno = 1;
|
|
cto->ct_seg_count = 0;
|
|
cto->ct_reloff = 0;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO2[%x] lun %d->iid%d flgs 0x%x sts 0x%x ssts "
|
|
"0x%x res %d", cto->ct_rxid, csio->ccb_h.target_lun,
|
|
cto->ct_iid, cto->ct_flags, cto->ct_status,
|
|
cto->rsp.m1.ct_scsi_status, cto->ct_resid);
|
|
isp_put_ctio2(isp, cto, qe);
|
|
ISP_TDQE(isp, "dma2_tgt_fc[no data]", curi, qe);
|
|
return;
|
|
}
|
|
|
|
if ((cto->ct_flags & CT2_FLAG_MMASK) != CT2_FLAG_MODE0) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"dma2_tgt_fc, a data CTIO2 without MODE0 set "
|
|
"(0x%x)", cto->ct_flags);
|
|
mp->error = EINVAL;
|
|
return;
|
|
}
|
|
|
|
|
|
nxti = *mp->nxtip;
|
|
|
|
/*
|
|
* Set up the CTIO2 data segments.
|
|
*/
|
|
for (segcnt = 0; cto->ct_seg_count < ISP_RQDSEG_T2 && segcnt < nseg;
|
|
cto->ct_seg_count++, segcnt++) {
|
|
cto->rsp.m0.ct_dataseg[cto->ct_seg_count].ds_base =
|
|
dm_segs[segcnt].ds_addr;
|
|
cto->rsp.m0.ct_dataseg[cto->ct_seg_count].ds_count =
|
|
dm_segs[segcnt].ds_len;
|
|
cto->rsp.m0.ct_xfrlen += dm_segs[segcnt].ds_len;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"isp_send_ctio2: ent0[%d]0x%jx:%ju",
|
|
cto->ct_seg_count, (uintmax_t)dm_segs[segcnt].ds_addr,
|
|
(uintmax_t)dm_segs[segcnt].ds_len);
|
|
}
|
|
|
|
while (segcnt < nseg) {
|
|
u_int16_t curip;
|
|
int seg;
|
|
ispcontreq_t local, *crq = &local, *qep;
|
|
|
|
qep = (ispcontreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, nxti);
|
|
curip = nxti;
|
|
nxti = ISP_NXT_QENTRY(curip, RQUEST_QUEUE_LEN(isp));
|
|
if (nxti == mp->optr) {
|
|
ISP_UNLOCK(isp);
|
|
isp_prt(isp, ISP_LOGTDEBUG0,
|
|
"tdma_mkfc: request queue overflow");
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
return;
|
|
}
|
|
cto->ct_header.rqs_entry_count++;
|
|
MEMZERO((void *)crq, sizeof (*crq));
|
|
crq->req_header.rqs_entry_count = 1;
|
|
crq->req_header.rqs_entry_type = RQSTYPE_DATASEG;
|
|
for (seg = 0; segcnt < nseg && seg < ISP_CDSEG;
|
|
segcnt++, seg++) {
|
|
crq->req_dataseg[seg].ds_base = dm_segs[segcnt].ds_addr;
|
|
crq->req_dataseg[seg].ds_count = dm_segs[segcnt].ds_len;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"isp_send_ctio2: ent%d[%d]%jx:%ju",
|
|
cto->ct_header.rqs_entry_count-1, seg,
|
|
(uintmax_t)dm_segs[segcnt].ds_addr,
|
|
(uintmax_t)dm_segs[segcnt].ds_len);
|
|
cto->rsp.m0.ct_xfrlen += dm_segs[segcnt].ds_len;
|
|
cto->ct_seg_count++;
|
|
}
|
|
MEMORYBARRIER(isp, SYNC_REQUEST, curip, QENTRY_LEN);
|
|
isp_put_cont_req(isp, crq, qep);
|
|
ISP_TDQE(isp, "cont entry", curi, qep);
|
|
}
|
|
|
|
/*
|
|
* No do final twiddling for the CTIO itself.
|
|
*/
|
|
cto->ct_header.rqs_seqno = 1;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"CTIO2[%x] lun %d->iid%d flgs 0x%x sts 0x%x ssts 0x%x resid %d",
|
|
cto->ct_rxid, csio->ccb_h.target_lun, (int) cto->ct_iid,
|
|
cto->ct_flags, cto->ct_status, cto->rsp.m1.ct_scsi_status,
|
|
cto->ct_resid);
|
|
isp_put_ctio2(isp, cto, qe);
|
|
ISP_TDQE(isp, "last dma2_tgt_fc", curi, qe);
|
|
*mp->nxtip = nxti;
|
|
}
|
|
#endif
|
|
|
|
static void dma2(void *, bus_dma_segment_t *, int, int);
|
|
|
|
#ifdef PAE
|
|
#define LOWD(x) ((uint32_t) x)
|
|
#define HIWD(x) ((uint32_t) (x >> 32))
|
|
|
|
static void
|
|
dma2(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
{
|
|
mush_t *mp;
|
|
struct ispsoftc *isp;
|
|
struct ccb_scsiio *csio;
|
|
struct isp_pcisoftc *pcs;
|
|
bus_dmamap_t *dp;
|
|
bus_dma_segment_t *eseg;
|
|
ispreq64_t *rq;
|
|
int seglim, datalen;
|
|
u_int16_t nxti;
|
|
|
|
mp = (mush_t *) arg;
|
|
if (error) {
|
|
mp->error = error;
|
|
return;
|
|
}
|
|
|
|
if (nseg < 1) {
|
|
isp_prt(mp->isp, ISP_LOGERR, "bad segment count (%d)", nseg);
|
|
mp->error = EFAULT;
|
|
return;
|
|
}
|
|
csio = mp->cmd_token;
|
|
isp = mp->isp;
|
|
rq = mp->rq;
|
|
pcs = (struct isp_pcisoftc *)mp->isp;
|
|
dp = &pcs->dmaps[isp_handle_index(rq->req_handle)];
|
|
nxti = *mp->nxtip;
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
} else {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
datalen = XS_XFRLEN(csio);
|
|
|
|
/*
|
|
* We're passed an initial partially filled in entry that
|
|
* has most fields filled in except for data transfer
|
|
* related values.
|
|
*
|
|
* Our job is to fill in the initial request queue entry and
|
|
* then to start allocating and filling in continuation entries
|
|
* until we've covered the entire transfer.
|
|
*/
|
|
|
|
if (IS_FC(isp)) {
|
|
rq->req_header.rqs_entry_type = RQSTYPE_T3RQS;
|
|
seglim = ISP_RQDSEG_T3;
|
|
((ispreqt3_t *)rq)->req_totalcnt = datalen;
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
((ispreqt3_t *)rq)->req_flags |= REQFLAG_DATA_IN;
|
|
} else {
|
|
((ispreqt3_t *)rq)->req_flags |= REQFLAG_DATA_OUT;
|
|
}
|
|
} else {
|
|
rq->req_header.rqs_entry_type = RQSTYPE_A64;
|
|
if (csio->cdb_len > 12) {
|
|
seglim = 0;
|
|
} else {
|
|
seglim = ISP_RQDSEG_A64;
|
|
}
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
rq->req_flags |= REQFLAG_DATA_IN;
|
|
} else {
|
|
rq->req_flags |= REQFLAG_DATA_OUT;
|
|
}
|
|
}
|
|
|
|
eseg = dm_segs + nseg;
|
|
|
|
while (datalen != 0 && rq->req_seg_count < seglim && dm_segs != eseg) {
|
|
if (IS_FC(isp)) {
|
|
ispreqt3_t *rq3 = (ispreqt3_t *)rq;
|
|
rq3->req_dataseg[rq3->req_seg_count].ds_base =
|
|
LOWD(dm_segs->ds_addr);
|
|
rq3->req_dataseg[rq3->req_seg_count].ds_basehi =
|
|
HIWD(dm_segs->ds_addr);
|
|
rq3->req_dataseg[rq3->req_seg_count].ds_count =
|
|
dm_segs->ds_len;
|
|
} else {
|
|
rq->req_dataseg[rq->req_seg_count].ds_base =
|
|
LOWD(dm_segs->ds_addr);
|
|
rq->req_dataseg[rq->req_seg_count].ds_basehi =
|
|
HIWD(dm_segs->ds_addr);
|
|
rq->req_dataseg[rq->req_seg_count].ds_count =
|
|
dm_segs->ds_len;
|
|
}
|
|
datalen -= dm_segs->ds_len;
|
|
rq->req_seg_count++;
|
|
dm_segs++;
|
|
}
|
|
|
|
while (datalen > 0 && dm_segs != eseg) {
|
|
u_int16_t onxti;
|
|
ispcontreq64_t local, *crq = &local, *cqe;
|
|
|
|
cqe = (ispcontreq64_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, nxti);
|
|
onxti = nxti;
|
|
nxti = ISP_NXT_QENTRY(onxti, RQUEST_QUEUE_LEN(isp));
|
|
if (nxti == mp->optr) {
|
|
isp_prt(isp, ISP_LOGDEBUG0, "Request Queue Overflow++");
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
return;
|
|
}
|
|
rq->req_header.rqs_entry_count++;
|
|
MEMZERO((void *)crq, sizeof (*crq));
|
|
crq->req_header.rqs_entry_count = 1;
|
|
crq->req_header.rqs_entry_type = RQSTYPE_A64_CONT;
|
|
|
|
seglim = 0;
|
|
while (datalen > 0 && seglim < ISP_CDSEG64 && dm_segs != eseg) {
|
|
crq->req_dataseg[seglim].ds_base =
|
|
LOWD(dm_segs->ds_addr);
|
|
crq->req_dataseg[seglim].ds_basehi =
|
|
HIWD(dm_segs->ds_addr);
|
|
crq->req_dataseg[seglim].ds_count =
|
|
dm_segs->ds_len;
|
|
rq->req_seg_count++;
|
|
dm_segs++;
|
|
seglim++;
|
|
datalen -= dm_segs->ds_len;
|
|
}
|
|
isp_put_cont64_req(isp, crq, cqe);
|
|
MEMORYBARRIER(isp, SYNC_REQUEST, onxti, QENTRY_LEN);
|
|
}
|
|
*mp->nxtip = nxti;
|
|
}
|
|
#else
|
|
static void
|
|
dma2(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
{
|
|
mush_t *mp;
|
|
struct ispsoftc *isp;
|
|
struct ccb_scsiio *csio;
|
|
struct isp_pcisoftc *pcs;
|
|
bus_dmamap_t *dp;
|
|
bus_dma_segment_t *eseg;
|
|
ispreq_t *rq;
|
|
int seglim, datalen;
|
|
u_int16_t nxti;
|
|
|
|
mp = (mush_t *) arg;
|
|
if (error) {
|
|
mp->error = error;
|
|
return;
|
|
}
|
|
|
|
if (nseg < 1) {
|
|
isp_prt(mp->isp, ISP_LOGERR, "bad segment count (%d)", nseg);
|
|
mp->error = EFAULT;
|
|
return;
|
|
}
|
|
csio = mp->cmd_token;
|
|
isp = mp->isp;
|
|
rq = mp->rq;
|
|
pcs = (struct isp_pcisoftc *)mp->isp;
|
|
dp = &pcs->dmaps[isp_handle_index(rq->req_handle)];
|
|
nxti = *mp->nxtip;
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREREAD);
|
|
} else {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
datalen = XS_XFRLEN(csio);
|
|
|
|
/*
|
|
* We're passed an initial partially filled in entry that
|
|
* has most fields filled in except for data transfer
|
|
* related values.
|
|
*
|
|
* Our job is to fill in the initial request queue entry and
|
|
* then to start allocating and filling in continuation entries
|
|
* until we've covered the entire transfer.
|
|
*/
|
|
|
|
if (IS_FC(isp)) {
|
|
seglim = ISP_RQDSEG_T2;
|
|
((ispreqt2_t *)rq)->req_totalcnt = datalen;
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
((ispreqt2_t *)rq)->req_flags |= REQFLAG_DATA_IN;
|
|
} else {
|
|
((ispreqt2_t *)rq)->req_flags |= REQFLAG_DATA_OUT;
|
|
}
|
|
} else {
|
|
if (csio->cdb_len > 12) {
|
|
seglim = 0;
|
|
} else {
|
|
seglim = ISP_RQDSEG;
|
|
}
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
rq->req_flags |= REQFLAG_DATA_IN;
|
|
} else {
|
|
rq->req_flags |= REQFLAG_DATA_OUT;
|
|
}
|
|
}
|
|
|
|
eseg = dm_segs + nseg;
|
|
|
|
while (datalen != 0 && rq->req_seg_count < seglim && dm_segs != eseg) {
|
|
if (IS_FC(isp)) {
|
|
ispreqt2_t *rq2 = (ispreqt2_t *)rq;
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_base =
|
|
dm_segs->ds_addr;
|
|
rq2->req_dataseg[rq2->req_seg_count].ds_count =
|
|
dm_segs->ds_len;
|
|
} else {
|
|
rq->req_dataseg[rq->req_seg_count].ds_base =
|
|
dm_segs->ds_addr;
|
|
rq->req_dataseg[rq->req_seg_count].ds_count =
|
|
dm_segs->ds_len;
|
|
}
|
|
datalen -= dm_segs->ds_len;
|
|
rq->req_seg_count++;
|
|
dm_segs++;
|
|
}
|
|
|
|
while (datalen > 0 && dm_segs != eseg) {
|
|
u_int16_t onxti;
|
|
ispcontreq_t local, *crq = &local, *cqe;
|
|
|
|
cqe = (ispcontreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, nxti);
|
|
onxti = nxti;
|
|
nxti = ISP_NXT_QENTRY(onxti, RQUEST_QUEUE_LEN(isp));
|
|
if (nxti == mp->optr) {
|
|
isp_prt(isp, ISP_LOGDEBUG0, "Request Queue Overflow++");
|
|
mp->error = MUSHERR_NOQENTRIES;
|
|
return;
|
|
}
|
|
rq->req_header.rqs_entry_count++;
|
|
MEMZERO((void *)crq, sizeof (*crq));
|
|
crq->req_header.rqs_entry_count = 1;
|
|
crq->req_header.rqs_entry_type = RQSTYPE_DATASEG;
|
|
|
|
seglim = 0;
|
|
while (datalen > 0 && seglim < ISP_CDSEG && dm_segs != eseg) {
|
|
crq->req_dataseg[seglim].ds_base =
|
|
dm_segs->ds_addr;
|
|
crq->req_dataseg[seglim].ds_count =
|
|
dm_segs->ds_len;
|
|
rq->req_seg_count++;
|
|
dm_segs++;
|
|
seglim++;
|
|
datalen -= dm_segs->ds_len;
|
|
}
|
|
isp_put_cont_req(isp, crq, cqe);
|
|
MEMORYBARRIER(isp, SYNC_REQUEST, onxti, QENTRY_LEN);
|
|
}
|
|
*mp->nxtip = nxti;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
isp_pci_dmasetup(struct ispsoftc *isp, struct ccb_scsiio *csio, ispreq_t *rq,
|
|
u_int16_t *nxtip, u_int16_t optr)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *)isp;
|
|
ispreq_t *qep;
|
|
bus_dmamap_t *dp = NULL;
|
|
mush_t mush, *mp;
|
|
void (*eptr)(void *, bus_dma_segment_t *, int, int);
|
|
|
|
qep = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, isp->isp_reqidx);
|
|
#ifdef ISP_TARGET_MODE
|
|
if (csio->ccb_h.func_code == XPT_CONT_TARGET_IO) {
|
|
if (IS_FC(isp)) {
|
|
eptr = tdma_mkfc;
|
|
} else {
|
|
eptr = tdma_mk;
|
|
}
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE ||
|
|
(csio->dxfer_len == 0)) {
|
|
mp = &mush;
|
|
mp->isp = isp;
|
|
mp->cmd_token = csio;
|
|
mp->rq = rq; /* really a ct_entry_t or ct2_entry_t */
|
|
mp->nxtip = nxtip;
|
|
mp->optr = optr;
|
|
mp->error = 0;
|
|
(*eptr)(mp, NULL, 0, 0);
|
|
goto mbxsync;
|
|
}
|
|
} else
|
|
#endif
|
|
eptr = dma2;
|
|
|
|
|
|
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE ||
|
|
(csio->dxfer_len == 0)) {
|
|
rq->req_seg_count = 1;
|
|
goto mbxsync;
|
|
}
|
|
|
|
/*
|
|
* Do a virtual grapevine step to collect info for
|
|
* the callback dma allocation that we have to use...
|
|
*/
|
|
mp = &mush;
|
|
mp->isp = isp;
|
|
mp->cmd_token = csio;
|
|
mp->rq = rq;
|
|
mp->nxtip = nxtip;
|
|
mp->optr = optr;
|
|
mp->error = 0;
|
|
|
|
if ((csio->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
|
|
if ((csio->ccb_h.flags & CAM_DATA_PHYS) == 0) {
|
|
int error, s;
|
|
dp = &pcs->dmaps[isp_handle_index(rq->req_handle)];
|
|
s = splsoftvm();
|
|
error = bus_dmamap_load(pcs->dmat, *dp,
|
|
csio->data_ptr, csio->dxfer_len, eptr, mp, 0);
|
|
if (error == EINPROGRESS) {
|
|
bus_dmamap_unload(pcs->dmat, *dp);
|
|
mp->error = EINVAL;
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"deferred dma allocation not supported");
|
|
} else if (error && mp->error == 0) {
|
|
#ifdef DIAGNOSTIC
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"error %d in dma mapping code", error);
|
|
#endif
|
|
mp->error = error;
|
|
}
|
|
splx(s);
|
|
} else {
|
|
/* Pointer to physical buffer */
|
|
struct bus_dma_segment seg;
|
|
seg.ds_addr = (bus_addr_t)(vm_offset_t)csio->data_ptr;
|
|
seg.ds_len = csio->dxfer_len;
|
|
(*eptr)(mp, &seg, 1, 0);
|
|
}
|
|
} else {
|
|
struct bus_dma_segment *segs;
|
|
|
|
if ((csio->ccb_h.flags & CAM_DATA_PHYS) != 0) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Physical segment pointers unsupported");
|
|
mp->error = EINVAL;
|
|
} else if ((csio->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Virtual segment addresses unsupported");
|
|
mp->error = EINVAL;
|
|
} else {
|
|
/* Just use the segments provided */
|
|
segs = (struct bus_dma_segment *) csio->data_ptr;
|
|
(*eptr)(mp, segs, csio->sglist_cnt, 0);
|
|
}
|
|
}
|
|
if (mp->error) {
|
|
int retval = CMD_COMPLETE;
|
|
if (mp->error == MUSHERR_NOQENTRIES) {
|
|
retval = CMD_EAGAIN;
|
|
} else if (mp->error == EFBIG) {
|
|
XS_SETERR(csio, CAM_REQ_TOO_BIG);
|
|
} else if (mp->error == EINVAL) {
|
|
XS_SETERR(csio, CAM_REQ_INVALID);
|
|
} else {
|
|
XS_SETERR(csio, CAM_UNREC_HBA_ERROR);
|
|
}
|
|
return (retval);
|
|
}
|
|
mbxsync:
|
|
switch (rq->req_header.rqs_entry_type) {
|
|
case RQSTYPE_REQUEST:
|
|
isp_put_request(isp, rq, qep);
|
|
break;
|
|
case RQSTYPE_CMDONLY:
|
|
isp_put_extended_request(isp, (ispextreq_t *)rq,
|
|
(ispextreq_t *)qep);
|
|
break;
|
|
case RQSTYPE_T2RQS:
|
|
isp_put_request_t2(isp, (ispreqt2_t *) rq, (ispreqt2_t *) qep);
|
|
break;
|
|
case RQSTYPE_A64:
|
|
case RQSTYPE_T3RQS:
|
|
isp_put_request_t3(isp, (ispreqt3_t *) rq, (ispreqt3_t *) qep);
|
|
break;
|
|
}
|
|
return (CMD_QUEUED);
|
|
}
|
|
|
|
static void
|
|
isp_pci_dmateardown(struct ispsoftc *isp, XS_T *xs, u_int16_t handle)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *)isp;
|
|
bus_dmamap_t *dp = &pcs->dmaps[isp_handle_index(handle)];
|
|
if ((xs->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_POSTREAD);
|
|
} else {
|
|
bus_dmamap_sync(pcs->dmat, *dp, BUS_DMASYNC_POSTWRITE);
|
|
}
|
|
bus_dmamap_unload(pcs->dmat, *dp);
|
|
}
|
|
|
|
|
|
static void
|
|
isp_pci_reset1(struct ispsoftc *isp)
|
|
{
|
|
/* Make sure the BIOS is disabled */
|
|
isp_pci_wr_reg(isp, HCCR, PCI_HCCR_CMD_BIOS);
|
|
/* and enable interrupts */
|
|
ENABLE_INTS(isp);
|
|
}
|
|
|
|
static void
|
|
isp_pci_dumpregs(struct ispsoftc *isp, const char *msg)
|
|
{
|
|
struct isp_pcisoftc *pcs = (struct isp_pcisoftc *)isp;
|
|
if (msg)
|
|
printf("%s: %s\n", device_get_nameunit(isp->isp_dev), msg);
|
|
else
|
|
printf("%s:\n", device_get_nameunit(isp->isp_dev));
|
|
if (IS_SCSI(isp))
|
|
printf(" biu_conf1=%x", ISP_READ(isp, BIU_CONF1));
|
|
else
|
|
printf(" biu_csr=%x", ISP_READ(isp, BIU2100_CSR));
|
|
printf(" biu_icr=%x biu_isr=%x biu_sema=%x ", ISP_READ(isp, BIU_ICR),
|
|
ISP_READ(isp, BIU_ISR), ISP_READ(isp, BIU_SEMA));
|
|
printf("risc_hccr=%x\n", ISP_READ(isp, HCCR));
|
|
|
|
|
|
if (IS_SCSI(isp)) {
|
|
ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE);
|
|
printf(" cdma_conf=%x cdma_sts=%x cdma_fifostat=%x\n",
|
|
ISP_READ(isp, CDMA_CONF), ISP_READ(isp, CDMA_STATUS),
|
|
ISP_READ(isp, CDMA_FIFO_STS));
|
|
printf(" ddma_conf=%x ddma_sts=%x ddma_fifostat=%x\n",
|
|
ISP_READ(isp, DDMA_CONF), ISP_READ(isp, DDMA_STATUS),
|
|
ISP_READ(isp, DDMA_FIFO_STS));
|
|
printf(" sxp_int=%x sxp_gross=%x sxp(scsi_ctrl)=%x\n",
|
|
ISP_READ(isp, SXP_INTERRUPT),
|
|
ISP_READ(isp, SXP_GROSS_ERR),
|
|
ISP_READ(isp, SXP_PINS_CTRL));
|
|
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE);
|
|
}
|
|
printf(" mbox regs: %x %x %x %x %x\n",
|
|
ISP_READ(isp, OUTMAILBOX0), ISP_READ(isp, OUTMAILBOX1),
|
|
ISP_READ(isp, OUTMAILBOX2), ISP_READ(isp, OUTMAILBOX3),
|
|
ISP_READ(isp, OUTMAILBOX4));
|
|
printf(" PCI Status Command/Status=%x\n",
|
|
pci_read_config(pcs->pci_dev, PCIR_COMMAND, 1));
|
|
}
|