Pyun YongHyeon bbc9416dc9 o Add support code for newer Marvell PHYs. ... o Remove unused static global variable e1000phy_debug. o Take advantage of mii_phy_dev_probe(). o Use MII_ANEGTICKS/MII_ANEGTICKS_GIGE instead of magic number 5. o Add IFM_NONE as e1000phy(4) supports it without issues. o Nuke magic PHY programming sequence in PHY reset and follow correct reset sequence. [1] o Make manual media selection work for all supported media types. o Don't set MIIF_NOISOLATE so e1000phy(4) can be used in configurations with multiple PHYs. o In 1000baseT, when setting the link manually, one side must be the master and the other the slave. If LINK0 is set, program the PHY to be a master, otherwise it's a slave. o When we lost a link, reset mii_ticks immediately so it correctly check number of seconds elapsed in autonegotiation phase. o Announce link loss right after it happens. o After kicking autonegotiation, report PHY status instead of returning immediatly. o When link state check is in progress, check auto negotiation completion bit only when auto negotiation is enbaled. o When PHY is resolved to a master, show it with IFM_FLAG2. Special thanks to marius who fixed several nits in original patch. In half-duplex mode, nfe(4) fails to send packets. I think it's a bug in nfe(4) as the same PHY works without problems on msk(4). Obtained from: em(4) [1] Reviewed by: marius Tested by: bz		2006-12-11 11:09:48 +00:00
..
acphy.c	- In acphy_service() for the MII_TICK case don't bother to check whether	2006-12-02 21:19:54 +00:00
acphyreg.h
amphy.c	- Probe Davicom DM9102 PHYs.	2006-12-02 21:21:16 +00:00
amphyreg.h
bmtphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
bmtphyreg.h
brgphy.c	Teach the brgphy about some new Broadcom IDs.	2006-12-11 01:29:40 +00:00
brgphyreg.h
ciphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
ciphyreg.h
e1000phy.c	o Add support code for newer Marvell PHYs.	2006-12-11 11:09:48 +00:00
e1000phyreg.h	Add additional Marvell PHY registers.	2006-12-11 10:43:32 +00:00
exphy.c	Replace hard-coded magic constants to system defined constants	2006-07-03 02:53:40 +00:00
gentbi.c	Analogous to mii_add_media(), factor out the code for checking whether	2006-11-27 23:50:19 +00:00
inphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
inphyreg.h
ip1000phy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
ip1000phyreg.h	Add ip1000 PHY driver for IC Plus IP1000A integrated PHY.	2006-07-25 00:16:09 +00:00
lxtphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
lxtphyreg.h
mii.c	- Introduce ifmedia_baudrate(), which returns correct baudrate of the	2006-02-14 12:10:03 +00:00
mii.h
mii_physubr.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
miibus_if.m
miidevs	Add a bunch of new Marvell PHY ids.	2006-12-11 10:42:04 +00:00
miivar.h	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
mlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
nsgphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
nsgphyreg.h
nsphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
nsphyreg.h
pnaphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphyreg.h
rgephy.c	- Don't set MIIF_NOISOLATE so rgephy(4) can be used in configurations	2006-12-02 19:48:53 +00:00
rgephyreg.h
rlphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
ruephy.c	Replace hard-coded magic constants to system defined constants	2006-07-03 02:53:40 +00:00
ruephyreg.h
tdkphy.c	- Don't set MIIF_NOISOLATE so tdkphy(4) can be used in configurations	2006-12-02 20:16:45 +00:00
tdkphyreg.h
tlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
tlphyreg.h
ukphy.c	Replace hard-coded magic constants to system defined constants	2006-07-03 02:53:40 +00:00
ukphy_subr.c	If the PHY has 1000BASE-T capability, check to see if a 1000BASE-T speed	2006-05-19 03:51:42 +00:00
xmphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
xmphyreg.h