51983604da
When using iSCSI PDU offload (cxgbei) on T6 adapters, a burst of
received PDUs can be reported via a single message to the driver.
Previously the driver passed these multi-PDU bursts up to the iSCSI
stack up as a single "large" PDU by rewriting the buffer offset, data
segment length, and DataSN fields in the iSCSI header. The DataSN
field in particular was rewritten so that each of the "large" PDUs
used consecutively increasing values. While this worked, the forged
DataSN values did not match the ExpDataSN value in the subsequent SCSI
Response PDU. The initiator does not currently verify this value, but
the forged DataSN values prevent adding a check.
To avoid this, allow a logical iSCSI PDU (struct icl_pdu) to describe
a burst of PDUs via a new 'ip_additional_pdus' field. Normally this
field is set to zero when 'struct icl_pdu' represents a single PDU.
If logical PDU represents a burst of on-the-wire PDUs, then 'ip_npdus'
contains the count of additional on-the-wire PDUs. The header of this
"large" PDU is still modified, but the DataSN field now contains the
DataSN value of the first on-the-wire PDU in the burst.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D31577
(cherry picked from commit
|
||
|---|---|---|
| .cirrus-ci | ||
| .github/workflows | ||
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| stand | ||
| sys | ||
| targets | ||
| tests | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| .arcconfig | ||
| .arclint | ||
| .cirrus.yml | ||
| .clang-format | ||
| .gitattributes | ||
| .gitignore | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| Makefile.libcompat | ||
| Makefile.sys.inc | ||
| ObsoleteFiles.inc | ||
| README | ||
| README.md | ||
| RELNOTES | ||
| UPDATING | ||
FreeBSD Source:
This is the top level of the FreeBSD source directory. This file
was last revised on:
FreeBSD
FreeBSD is an operating system used to power modern servers, desktops, and embedded platforms. A large community has continually developed it for more than thirty years. Its advanced networking, security, and storage features have made FreeBSD the platform of choice for many of the busiest web sites and most pervasive embedded networking and storage devices.
For copyright information, please see the file COPYRIGHT in this directory. Additional copyright information also exists for some sources in this tree - please see the specific source directories for more information.
The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7), config(8), https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html, and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information, including setting make(1) variables.
Source Roadmap:
bin System/user commands.
cddl Various commands and libraries under the Common Development
and Distribution License.
contrib Packages contributed by 3rd parties.
crypto Cryptography stuff (see crypto/README).
etc Template files for /etc.
gnu Various commands and libraries under the GNU Public License.
Please see gnu/COPYING* for more information.
include System include files.
kerberos5 Kerberos5 (Heimdal) package.
lib System libraries.
libexec System daemons.
release Release building Makefile & associated tools.
rescue Build system for statically linked /rescue utilities.
sbin System commands.
secure Cryptographic libraries and commands.
share Shared resources.
stand Boot loader sources.
sys Kernel sources.
sys/<arch>/conf Kernel configuration files. GENERIC is the configuration
used in release builds. NOTES contains documentation of
all possible entries.
tests Regression tests which can be run by Kyua. See tests/README
for additional information.
tools Utilities for regression testing and miscellaneous tasks.
usr.bin User commands.
usr.sbin System administration commands.
For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:
https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html