Ian Lepore dc47198f50 Log mmc and sd command failures. Reporting of routine expected errors, ... such as timeouts while probing a bus or testing for a feature, is squelched. Also, error reporting is limited to 5 events per second, because when an sdcard goes bad on a low-end embedded board, flooding the console at high speed isn't helpful. Original logging code contributed by Michal Meloun, but then I fancied it up with squelching and ppsratecheck.		2014-12-20 04:24:40 +00:00
..
host	Always wait 'command done' interrupt status bit before proceeding next command.	2014-10-08 08:51:05 +00:00
bridge.h	Set of mmc layer improvements:	2008-10-08 17:35:41 +00:00
mmc.c	Log mmc and sd command failures. Reporting of routine expected errors,	2014-12-20 04:24:40 +00:00
mmcbr_if.m	A careful reading of the disclaimer that is required to download the	2007-05-26 05:23:36 +00:00
mmcbrvar.h	o Fixes:	2012-04-21 01:51:16 +00:00
mmcbus_if.m	A careful reading of the disclaimer that is required to download the	2007-05-26 05:23:36 +00:00
mmcreg.h	Fix highest voltage detection	2013-01-21 23:24:16 +00:00
mmcsd.c	fwsectors and fwheads used to be somehwat arbitrary. However, they are	2014-10-16 19:52:12 +00:00
mmcvar.h	Export an mmc or sd card's serial number from the mmc layer as an ivar.	2014-07-31 16:54:54 +00:00