opnsense-src/sys/dev/twa/tw_osl_cam.c

/*
 * Copyright (c) 2004-05 Applied Micro Circuits Corporation.
 * Copyright (c) 2004-05 Vinod Kashyap.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	$FreeBSD$
 */

/*
 * AMCC'S 3ware driver for 9000 series storage controllers.
 *
 * Author: Vinod Kashyap
 */


/*
 * FreeBSD CAM related functions.
 */


#include <dev/twa/tw_osl_includes.h>

#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/cam_periph.h>

#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>

static TW_VOID	twa_action(struct cam_sim *sim, union ccb *ccb);
static TW_VOID	twa_poll(struct cam_sim *sim);
static TW_VOID	twa_async(TW_VOID *callback_arg, TW_UINT32 code,
	struct cam_path *path, TW_VOID *arg);
static TW_VOID	twa_timeout(TW_VOID *arg);
static TW_VOID	twa_bus_scan_cb(struct cam_periph *periph, union ccb *ccb);

static TW_INT32	tw_osli_execute_scsi(struct tw_osli_req_context *req,
	union ccb *ccb);



/*
 * Function name:	tw_osli_cam_attach
 * Description:		Attaches the driver to CAM.
 *
 * Input:		sc	-- ptr to OSL internal ctlr context
 * Output:		None
 * Return value:	0	-- success
 *			non-zero-- failure
 */
TW_INT32
tw_osli_cam_attach(struct twa_softc *sc)
{
	struct cam_devq		*devq;
	struct ccb_setasync	csa;
	TW_INT32		error;

	tw_osli_dbg_dprintf(3, sc, "entered");

	/*
	 * Create the device queue for our SIM.
	 */
	if ((devq = cam_simq_alloc(TW_OSLI_MAX_NUM_IOS)) == NULL) {
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2100,
			"Failed to create SIM device queue",
			ENOMEM);
		return(ENOMEM);
	}

	/*
	 * Create a SIM entry.  Though we can support TW_OSLI_MAX_NUM_IOS
	 * simultaneous requests, we claim to be able to handle only
	 * (TW_OSLI_MAX_NUM_IOS - 1), so that we always have a request
	 * packet available to service ioctls.
	 */
	tw_osli_dbg_dprintf(3, sc, "Calling cam_sim_alloc");
	sc->sim = cam_sim_alloc(twa_action, twa_poll, "twa", sc,
			device_get_unit(sc->bus_dev), &Giant,
			TW_OSLI_MAX_NUM_IOS - 1, 1, devq);
	if (sc->sim == NULL) {
		cam_simq_free(devq);
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2101,
			"Failed to create a SIM entry",
			ENOMEM);
		return(ENOMEM);
	}

	/*
	 * Register the bus.
	 */
	tw_osli_dbg_dprintf(3, sc, "Calling xpt_bus_register");
	mtx_lock(&Giant);
	if (xpt_bus_register(sc->sim, 0) != CAM_SUCCESS) {
		cam_sim_free(sc->sim, TRUE);
		sc->sim = NULL; /* so cam_detach will not try to free it */
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2102,
			"Failed to register the bus",
			ENXIO);
		return(ENXIO);
	}

	tw_osli_dbg_dprintf(3, sc, "Calling xpt_create_path");
	if (xpt_create_path(&sc->path, NULL,
				cam_sim_path(sc->sim),
				CAM_TARGET_WILDCARD,
				CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
		xpt_bus_deregister(cam_sim_path (sc->sim));
		/* Passing TRUE to cam_sim_free will free the devq as well. */
		cam_sim_free(sc->sim, TRUE);
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2103,
			"Failed to create path",
			ENXIO);
		return(ENXIO);
	}

	tw_osli_dbg_dprintf(3, sc, "Calling xpt_setup_ccb");
	xpt_setup_ccb(&csa.ccb_h, sc->path, 5);
	csa.ccb_h.func_code = XPT_SASYNC_CB;
	csa.event_enable = AC_FOUND_DEVICE | AC_LOST_DEVICE;
	csa.callback = twa_async;
	csa.callback_arg = sc;
	xpt_action((union ccb *)&csa);
	mtx_unlock(&Giant);

	tw_osli_dbg_dprintf(3, sc, "Calling tw_osli_request_bus_scan");
	/*
	 * Request a bus scan, so that CAM gets to know of
	 * the logical units that we control.
	 */
	if ((error = tw_osli_request_bus_scan(sc)))
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2104,
			"Bus scan request to CAM failed",
			error);
	
	tw_osli_dbg_dprintf(3, sc, "exiting");
	return(0);
}



/*
 * Function name:	tw_osli_cam_detach
 * Description:		Detaches the driver from CAM.
 *
 * Input:		sc	-- ptr to OSL internal ctlr context
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osli_cam_detach(struct twa_softc *sc)
{
	tw_osli_dbg_dprintf(3, sc, "entered");

	mtx_lock(&Giant);
	if (sc->path)
		xpt_free_path(sc->path);
	if (sc->sim) {
		xpt_bus_deregister(cam_sim_path(sc->sim));
		/* Passing TRUE to cam_sim_free will free the devq as well. */
		cam_sim_free(sc->sim, TRUE);
	}
	mtx_unlock(&Giant);
}



/*
 * Function name:	tw_osli_execute_scsi
 * Description:		Build a fw cmd, based on a CAM style ccb, and
 *			send it down.
 *
 * Input:		req	-- ptr to OSL internal request context
 *			ccb	-- ptr to CAM style ccb
 * Output:		None
 * Return value:	0	-- success
 *			non-zero-- failure
 */
TW_INT32
tw_osli_execute_scsi(struct tw_osli_req_context *req, union ccb *ccb)
{
	struct twa_softc		*sc = req->ctlr;
	struct tw_cl_req_packet		*req_pkt;
	struct tw_cl_scsi_req_packet	*scsi_req;
	struct ccb_hdr			*ccb_h = &(ccb->ccb_h);
	struct ccb_scsiio		*csio = &(ccb->csio);
	TW_INT32			error;

	tw_osli_dbg_dprintf(10, sc, "SCSI I/O request 0x%x",
		csio->cdb_io.cdb_bytes[0]);

	if (ccb_h->target_id >= TW_CL_MAX_NUM_UNITS) {
		tw_osli_dbg_dprintf(3, sc, "Invalid target. PTL = %x %x %x",
			ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
		ccb_h->status |= CAM_TID_INVALID;
		xpt_done(ccb);
		return(1);
	}
	if (ccb_h->target_lun >= TW_CL_MAX_NUM_LUNS) {
		tw_osli_dbg_dprintf(3, sc, "Invalid lun. PTL = %x %x %x",
			ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
		ccb_h->status |= CAM_LUN_INVALID;
		xpt_done(ccb);
		return(1);
	}

	if(ccb_h->flags & CAM_CDB_PHYS) {
		tw_osli_printf(sc, "",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2105,
			"Physical CDB address!");
		ccb_h->status = CAM_REQ_CMP_ERR;
		xpt_done(ccb);
		return(1);
	}

	/*
	 * We are going to work on this request.  Mark it as enqueued (though
	 * we don't actually queue it...)
	 */
	ccb_h->status |= CAM_SIM_QUEUED;

	if((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
		if(ccb_h->flags & CAM_DIR_IN)
			req->flags |= TW_OSLI_REQ_FLAGS_DATA_IN;
		else
			req->flags |= TW_OSLI_REQ_FLAGS_DATA_OUT;
	}

	/* Build the CL understood request packet for SCSI cmds. */
	req_pkt = &req->req_pkt;
	req_pkt->status = 0;
	req_pkt->tw_osl_callback = tw_osl_complete_io;
	scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
	scsi_req->unit = ccb_h->target_id;
	scsi_req->lun = ccb_h->target_lun;
	scsi_req->sense_len = 0;
	scsi_req->sense_data = (TW_UINT8 *)(&csio->sense_data);
	scsi_req->scsi_status = 0;
	if(ccb_h->flags & CAM_CDB_POINTER)
		scsi_req->cdb = csio->cdb_io.cdb_ptr;
	else
		scsi_req->cdb = csio->cdb_io.cdb_bytes;
	scsi_req->cdb_len = csio->cdb_len;

	if (!(ccb_h->flags & CAM_DATA_PHYS)) {
		/* Virtual data addresses.  Need to convert them... */
		tw_osli_dbg_dprintf(3, sc,
			"XPT_SCSI_IO: Single virtual address!");
		if (!(ccb_h->flags & CAM_SCATTER_VALID)) {
			if (csio->dxfer_len > TW_CL_MAX_IO_SIZE) {
				tw_osli_printf(sc, "size = %d",
					TW_CL_SEVERITY_ERROR_STRING,
					TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
					0x2106,
					"I/O size too big",
					csio->dxfer_len);
				ccb_h->status = CAM_REQ_TOO_BIG;
				xpt_done(ccb);
				return(1);
			}

			if ((req->length = csio->dxfer_len)) {
				req->data = csio->data_ptr;
				scsi_req->sgl_entries = 1;
			}
		} else {
			tw_osli_printf(sc, "",
				TW_CL_SEVERITY_ERROR_STRING,
				TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
				0x2107,
				"XPT_SCSI_IO: Got SGList");
			ccb_h->status = CAM_REQ_CMP_ERR;
			xpt_done(ccb);
			return(1);
		}
	} else {
		/* Data addresses are physical. */
		tw_osli_printf(sc, "",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2108,
			"XPT_SCSI_IO: Physical data addresses");
		ccb_h->status = CAM_REQ_CMP_ERR;
		ccb_h->status |= CAM_RELEASE_SIMQ;
		ccb_h->status &= ~CAM_SIM_QUEUED;
		xpt_done(ccb);
		return(1);
	}

	ccb_h->timeout_ch = timeout(twa_timeout, req,
		(ccb_h->timeout * hz) / 1000);
	/*
	 * twa_map_load_data_callback will fill in the SGL,
	 * and submit the I/O.
	 */
	error = tw_osli_map_request(req);
	return(error);
}



/*
 * Function name:	twa_action
 * Description:		Driver entry point for CAM's use.
 *
 * Input:		sim	-- sim corresponding to the ctlr
 *			ccb	-- ptr to CAM request
 * Output:		None
 * Return value:	None
 */
TW_VOID
twa_action(struct cam_sim *sim, union ccb *ccb)
{
	struct twa_softc	*sc = (struct twa_softc *)cam_sim_softc(sim);
	struct ccb_hdr		*ccb_h = &(ccb->ccb_h);

	switch (ccb_h->func_code) {
	case XPT_SCSI_IO:	/* SCSI I/O */
	{
		struct tw_osli_req_context	*req;

		if ((sc->state & TW_OSLI_CTLR_STATE_SIMQ_FROZEN) ||
				((req = tw_osli_get_request(sc)) == NULL)) {
			tw_osli_dbg_dprintf(2, sc,
				"simq frozen/Cannot get request pkt.");
			/*
			 * Freeze the simq to maintain ccb ordering.  The next
			 * ccb that gets completed will unfreeze the simq.
			 */
			tw_osli_disallow_new_requests(sc);
			ccb_h->status |= CAM_REQUEUE_REQ;
			xpt_done(ccb);
			break;
		}
		req->req_handle.osl_req_ctxt = req;
		req->orig_req = ccb;
		if (tw_osli_execute_scsi(req, ccb))
			tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
		break;
	}

	case XPT_ABORT:
		tw_osli_dbg_dprintf(2, sc, "Abort request.");
		ccb_h->status = CAM_UA_ABORT;
		xpt_done(ccb);
		break;

	case XPT_RESET_BUS:
		tw_cl_create_event(&(sc->ctlr_handle), TW_CL_TRUE,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2108, 0x3, TW_CL_SEVERITY_INFO_STRING,
			"Received Reset Bus request from CAM",
			" ");

		if (tw_cl_reset_ctlr(&sc->ctlr_handle)) {
			tw_cl_create_event(&(sc->ctlr_handle), TW_CL_TRUE,
				TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
				0x2109, 0x1, TW_CL_SEVERITY_ERROR_STRING,
				"Failed to reset bus",
				" ");
			ccb_h->status = CAM_REQ_CMP_ERR;
		}
		else
			ccb_h->status = CAM_REQ_CMP;

		xpt_done(ccb);
		break;

	case XPT_SET_TRAN_SETTINGS:
		tw_osli_dbg_dprintf(3, sc, "XPT_SET_TRAN_SETTINGS");

		/*
		 * This command is not supported, since it's very specific
		 * to SCSI, and we are doing ATA.
		 */
  		ccb_h->status = CAM_FUNC_NOTAVAIL;
  		xpt_done(ccb);
  		break;

	case XPT_GET_TRAN_SETTINGS: 
	{
		struct ccb_trans_settings	*cts = &ccb->cts;
		struct ccb_trans_settings_scsi *scsi =
		    &cts->proto_specific.scsi;
		struct ccb_trans_settings_spi *spi =
		    &cts->xport_specific.spi;

		cts->protocol = PROTO_SCSI;
		cts->protocol_version = SCSI_REV_2;
		cts->transport = XPORT_SPI;
		cts->transport_version = 2;

		spi->valid = CTS_SPI_VALID_DISC;
		spi->flags = CTS_SPI_FLAGS_DISC_ENB;
		scsi->valid = CTS_SCSI_VALID_TQ;
		scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
		tw_osli_dbg_dprintf(3, sc, "XPT_GET_TRAN_SETTINGS");
		ccb_h->status = CAM_REQ_CMP;
		xpt_done(ccb);
		break;
	}

	case XPT_CALC_GEOMETRY:
		tw_osli_dbg_dprintf(3, sc, "XPT_CALC_GEOMETRY");
		cam_calc_geometry(&ccb->ccg, 1/* extended */);
		xpt_done(ccb);
		break;

	case XPT_PATH_INQ:    /* Path inquiry -- get twa properties */
	{
		struct ccb_pathinq	*path_inq = &ccb->cpi;

		tw_osli_dbg_dprintf(3, sc, "XPT_PATH_INQ request");

		path_inq->version_num = 1;
		path_inq->hba_inquiry = 0;
		path_inq->target_sprt = 0;
		path_inq->hba_misc = 0;
		path_inq->hba_eng_cnt = 0;
		path_inq->max_target = TW_CL_MAX_NUM_UNITS;
		path_inq->max_lun = TW_CL_MAX_NUM_LUNS - 1;
		path_inq->unit_number = cam_sim_unit(sim);
		path_inq->bus_id = cam_sim_bus(sim);
		path_inq->initiator_id = TW_CL_MAX_NUM_UNITS;
		path_inq->base_transfer_speed = 100000;
		strncpy(path_inq->sim_vid, "FreeBSD", SIM_IDLEN);
		strncpy(path_inq->hba_vid, "3ware", HBA_IDLEN);
		strncpy(path_inq->dev_name, cam_sim_name(sim), DEV_IDLEN);
                path_inq->transport = XPORT_SPI;
                path_inq->transport_version = 2;
                path_inq->protocol = PROTO_SCSI;
                path_inq->protocol_version = SCSI_REV_2;
		ccb_h->status = CAM_REQ_CMP;
		xpt_done(ccb);
		break;
	}

	default:
		tw_osli_dbg_dprintf(3, sc, "func_code = %x", ccb_h->func_code);
		ccb_h->status = CAM_REQ_INVALID;
		xpt_done(ccb);
		break;
	}
}



/*
 * Function name:	twa_poll
 * Description:		Driver entry point called when interrupts are not
 *			available.
 *
 * Input:		sim	-- sim corresponding to the controller
 * Output:		None
 * Return value:	None
 */
TW_VOID
twa_poll(struct cam_sim *sim)
{
	struct twa_softc *sc = (struct twa_softc *)(cam_sim_softc(sim));

	tw_osli_dbg_dprintf(3, sc, "entering; sc = %p", sc);
	/*
	 * It's been observed that twa_poll can get called (from
	 * dashutdown --> xpt_polled_action) even when interrupts are
	 * active, in which case, the ISR might clear the interrupt,
	 * leaving the call to tw_cl_interrupt below, no way of determining
	 * that the response from firmware is ready, resulting in
	 * tw_cl_deferred_interrupt never getting called.  To cover this case,
	 * we will make the call to tw_cl_deferred_interrupt not dependent
	 * on the return value from tw_cl_interrupt.
	 */
	tw_cl_interrupt(&(sc->ctlr_handle));
	tw_cl_deferred_interrupt(&(sc->ctlr_handle));
	tw_osli_dbg_dprintf(3, sc, "exiting; sc = %p", sc);
}



/*
 * Function name:	twa_async
 * Description:		Driver entry point for CAM to notify driver of special
 *			events.  We don't use this for now.
 *
 * Input:		callback_arg	-- ptr to per ctlr structure
 *			code		-- code associated with the event
 *			path		-- cam path
 *			arg		-- 
 * Output:		None
 * Return value:	0	-- success
 *			non-zero-- failure
 */
TW_VOID
twa_async(TW_VOID *callback_arg, TW_UINT32 code, 
	struct cam_path *path, TW_VOID *arg)
{
#ifdef TW_OSL_DEBUG
	struct twa_softc *sc = (struct twa_softc *)callback_arg;
#endif /* TW_OSL_DEBUG */

	tw_osli_dbg_dprintf(3, sc, "sc = %p, code = %x, path = %p, arg = %p",
		sc, code, path, arg);
}



/*
 * Function name:	twa_timeout
 * Description:		Driver entry point for being alerted on a request
 *			timing out.
 *
 * Input:		arg	-- ptr to timed out request
 * Output:		None
 * Return value:	None
 */
static TW_VOID
twa_timeout(TW_VOID *arg)
{
	struct tw_osli_req_context	*req =
		(struct tw_osli_req_context *)arg;

	tw_cl_create_event(&(req->ctlr->ctlr_handle), TW_CL_TRUE,
		TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
		0x210B, 0x1, TW_CL_SEVERITY_ERROR_STRING,
		"Request timed out!",
		"request = %p", req);
	tw_cl_reset_ctlr(&(req->ctlr->ctlr_handle));
}



/*
 * Function name:	tw_osli_request_bus_scan
 * Description:		Requests CAM for a scan of the bus.
 *
 * Input:		sc	-- ptr to per ctlr structure
 * Output:		None
 * Return value:	0	-- success
 *			non-zero-- failure
 */
TW_INT32
tw_osli_request_bus_scan(struct twa_softc *sc)
{
	struct cam_path	*path;
	union ccb	*ccb;

	tw_osli_dbg_dprintf(3, sc, "entering");

	/* If we get here before sc->sim is initialized, return an error. */
	if (!(sc->sim))
		return(ENXIO);
	if ((ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK)) == NULL)
		return(ENOMEM);
	bzero(ccb, sizeof(union ccb));
	mtx_lock(&Giant);
	if (xpt_create_path(&path, xpt_periph, cam_sim_path(sc->sim),
		CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP)
		return(EIO);

	xpt_setup_ccb(&ccb->ccb_h, path, 5);
	ccb->ccb_h.func_code = XPT_SCAN_BUS;
	ccb->ccb_h.cbfcnp = twa_bus_scan_cb;
	ccb->crcn.flags = CAM_FLAG_NONE;
	xpt_action(ccb);
	mtx_unlock(&Giant);
	return(0);
}



/*
 * Function name:	twa_bus_scan_cb
 * Description:		Callback from CAM on a bus scan request.
 *
 * Input:		periph	-- we don't use this
 *			ccb	-- bus scan request ccb that we sent to CAM
 * Output:		None
 * Return value:	None
 */
static TW_VOID
twa_bus_scan_cb(struct cam_periph *periph, union ccb *ccb)
{
	tw_osli_dbg_printf(3, "entering");

	if (ccb->ccb_h.status != CAM_REQ_CMP)
		printf("cam_scan_callback: failure status = %x\n",
			ccb->ccb_h.status);
	else
		tw_osli_dbg_printf(3, "success");

	xpt_free_path(ccb->ccb_h.path);
	free(ccb, M_TEMP);
}



/*
 * Function name:	tw_osli_allow_new_requests
 * Description:		Sets the appropriate status bits in a ccb such that,
 *			when the ccb is completed by a call to xpt_done,
 *			CAM knows that it's ok to unfreeze the flow of new
 *			requests to this controller, if the flow is frozen.
 *
 * Input:		sc	-- ptr to OSL internal ctlr context
 *			ccb	-- ptr to CAM request
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osli_allow_new_requests(struct twa_softc *sc, TW_VOID *ccb)
{
	((union ccb *)(ccb))->ccb_h.status |= CAM_RELEASE_SIMQ;
	sc->state &= ~TW_OSLI_CTLR_STATE_SIMQ_FROZEN;
}



/*
 * Function name:	tw_osli_disallow_new_requests
 * Description:		Calls the appropriate CAM function, so as to freeze
 *			the flow of new requests from CAM to this controller.
 *
 * Input:		sc	-- ptr to OSL internal ctlr context
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osli_disallow_new_requests(struct twa_softc *sc)
{
	mtx_lock(&Giant);
	xpt_freeze_simq(sc->sim, 1);
	mtx_unlock(&Giant);
	sc->state |= TW_OSLI_CTLR_STATE_SIMQ_FROZEN;
}



/*
 * Function name:	tw_osl_ctlr_busy
 * Description:		CL calls this function on cmd queue full or otherwise,
 *			when it is too busy to accept new requests.
 *
 * Input:		ctlr_handle	-- ptr to controller handle
 *			req_handle	-- ptr to request handle sent by OSL.
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osl_ctlr_busy(struct tw_cl_ctlr_handle *ctlr_handle,
	struct tw_cl_req_handle *req_handle)
{
	tw_osli_disallow_new_requests(ctlr_handle->osl_ctlr_ctxt);
}



/*
 * Function name:	tw_osl_scan_bus
 * Description:		CL calls this function to request for a bus scan.
 *
 * Input:		ctlr_handle	-- ptr to controller handle
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osl_scan_bus(struct tw_cl_ctlr_handle *ctlr_handle)
{
	struct twa_softc	*sc = ctlr_handle->osl_ctlr_ctxt;
	TW_INT32		error;

	if ((error = tw_osli_request_bus_scan(sc)))
		tw_osli_printf(sc, "error = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x2109,
			"Bus scan request to CAM failed",
			error);
}



/*
 * Function name:	tw_osl_complete_io
 * Description:		Called to complete CAM scsi requests.
 *
 * Input:		req_handle	-- ptr to request handle
 * Output:		None
 * Return value:	None
 */
TW_VOID
tw_osl_complete_io(struct tw_cl_req_handle *req_handle)
{
	struct tw_osli_req_context	*req = req_handle->osl_req_ctxt;
	struct tw_cl_req_packet		*req_pkt =
		(struct tw_cl_req_packet *)(&req->req_pkt);
	struct tw_cl_scsi_req_packet	*scsi_req;
	struct twa_softc		*sc = req->ctlr;
	union ccb			*ccb = (union ccb *)(req->orig_req);

	tw_osli_dbg_dprintf(10, sc, "entering");

	if (req->state != TW_OSLI_REQ_STATE_BUSY)
		tw_osli_printf(sc, "request = %p, status = %d",
			TW_CL_SEVERITY_ERROR_STRING,
			TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
			0x210A,
			"Unposted command completed!!",
			req, req->state);

	/*
	 * Remove request from the busy queue.  Just mark it complete.
	 * There's no need to move it into the complete queue as we are
	 * going to be done with it right now.
	 */
	req->state = TW_OSLI_REQ_STATE_COMPLETE;
	tw_osli_req_q_remove_item(req, TW_OSLI_BUSY_Q);

	tw_osli_unmap_request(req);

	untimeout(twa_timeout, req, ccb->ccb_h.timeout_ch);
	if (req->error_code) {
		/* This request never got submitted to the firmware. */
		if (req->error_code == EBUSY) {
			/*
			 * Cmd queue is full, or the Common Layer is out of
			 * resources.  The simq will already have been frozen
			 * by CL's call to tw_osl_ctlr_busy, and this will
			 * maintain ccb ordering.  The next ccb that gets
			 * completed will unfreeze the simq.
			 */
			ccb->ccb_h.status |= CAM_REQUEUE_REQ;
		}
		else if (req->error_code == EFBIG)
			ccb->ccb_h.status = CAM_REQ_TOO_BIG;
		else
			ccb->ccb_h.status = CAM_REQ_CMP_ERR;
	} else {
		scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
		if (req_pkt->status == TW_CL_ERR_REQ_SUCCESS)
			ccb->ccb_h.status = CAM_REQ_CMP;
		else {
			if (req_pkt->status & TW_CL_ERR_REQ_INVALID_TARGET)
				ccb->ccb_h.status |= CAM_TID_INVALID;
			else if (req_pkt->status & TW_CL_ERR_REQ_INVALID_LUN)
				ccb->ccb_h.status |= CAM_LUN_INVALID;
			else if (req_pkt->status & TW_CL_ERR_REQ_SCSI_ERROR)
				ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
			else if (req_pkt->status & TW_CL_ERR_REQ_BUS_RESET)
				ccb->ccb_h.status |= CAM_SCSI_BUS_RESET;
			/*
			 * If none of the above errors occurred, simply
			 * mark completion error.
			 */
			if (ccb->ccb_h.status == 0)
				ccb->ccb_h.status = CAM_REQ_CMP_ERR;

			if (req_pkt->status & TW_CL_ERR_REQ_AUTO_SENSE_VALID) {
				ccb->csio.sense_len = scsi_req->sense_len;
				ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
			}
		}

		ccb->csio.scsi_status = scsi_req->scsi_status;
		/* If simq is frozen, unfreeze it. */
		if (sc->state & TW_OSLI_CTLR_STATE_SIMQ_FROZEN)
			tw_osli_allow_new_requests(sc, (TW_VOID *)ccb);
	}

	ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
	xpt_done(ccb);
	if (! req->error_code)
		 /* twa_action will free the request otherwise */
		tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}