Adrian Chadd 5e0185081d Fix the holding descriptor logic to actually be "right" (for values ... of "right".) Flip back on the "always continue TX DMA using the holding descriptor" code - by always setting ATH_BUF_BUSY and never setting axq_link to NULL. Since the holding descriptor is accessed via txq->axq_link and _that_ is done behind the TXQ lock rather than the TX path lock, the holding descriptor stuff itself needs to be behind the TXQ lock. So, do the mental gymnastics needed to do this. I've not seen any of the hardware failures that I was seeing when I last tried to do this. Tested: * AR5416, STA mode		2013-05-08 21:23:51 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Implement STBC receive frame statistics.	2013-05-08 01:11:25 +00:00
ath_rate	I give up - just throw the EWMA update into the normal update_stats()	2013-02-27 04:33:06 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath.c	Fix the holding descriptor logic to actually be "right" (for values	2013-05-08 21:23:51 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_alq.h	Fix an incorrect sizeof()	2013-02-18 18:39:15 +00:00
if_ath_beacon.c	Use the new net80211 method to fetch the node TX power, rather than	2013-04-16 21:26:44 +00:00
if_ath_beacon.h	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	This shouldn't have made it into this commit, sorry.	2013-05-08 08:53:55 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx.c	Implement STBC receive frame statistics.	2013-05-08 01:11:25 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_rx_edma.c	Use a per-RX-queue deferred list, rather than a single deferred list for	2013-04-16 20:21:02 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement STBC receive frame statistics.	2013-05-08 01:11:25 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx.c	Simplify this bit of code!	2013-05-07 07:44:07 +00:00
if_ath_tx.h	Add a new option to limit the maximum size of aggregates.	2013-02-21 06:18:40 +00:00
if_ath_tx_edma.c	Fix this to compile when ATH_DEBUG_ALQ is defined but ATH_DEBUG isn't.	2013-04-08 21:15:43 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement STBC receive frame statistics.	2013-05-08 01:11:25 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Fix the holding descriptor logic to actually be "right" (for values	2013-05-08 21:23:51 +00:00