Nathan Whitehorn dcd08302e5 Retire machine/fdt.h as a header used by MI code, as its function is now ... obsolete. This involves the following pieces: - Remove it entirely on PowerPC, where it is not used by MD code either - Remove all references to machine/fdt.h in non-architecture-specific code (aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat non-arch-specific). - Fix code relying on header pollution from machine/fdt.h includes - Legacy fdtbus.c (still used on x86 FDT systems) now passes resource requests to its parent (nexus). This allows x86 FDT devices to allocate both memory and IO requests and removes the last notionally MI use of fdtbus_bs_tag. - On those architectures that retain a machine/fdt.h, unused bits like FDT_MAP_IRQ and FDT_INTR_MAX have been removed.		2014-01-05 18:46:58 +00:00
..
uart.h	Add support for Freescale Vybrid Family VF600 heterogeneous	2013-11-12 18:02:56 +00:00
uart_bus.h	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_acpi.c	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_ebus.c
uart_bus_fdt.c	Retire machine/fdt.h as a header used by MI code, as its function is now	2014-01-05 18:46:58 +00:00
uart_bus_isa.c	uart: add resume method and enable it for attachments on the most common	2013-02-02 11:38:26 +00:00
uart_bus_pccard.c
uart_bus_pci.c	Add another HP iLO serial (console) port, found on Itanium servers.	2013-12-24 19:58:27 +00:00
uart_bus_puc.c
uart_bus_scc.c
uart_core.c	Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable	2013-08-19 15:51:30 +00:00
uart_cpu.h	Plumb the cn_grab and cn_ungrab routines down into the uart	2013-12-21 16:23:31 +00:00
uart_cpu_fdt.c	Arrange for uart_cpu_fdt's probe() routine to use the same table of compat	2013-11-02 20:14:39 +00:00
uart_cpu_ia64.c
uart_cpu_pc98.c
uart_cpu_powerpc.c	Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use	2013-12-01 19:05:32 +00:00
uart_cpu_sparc64.c	Use strchr() and strrchr().	2012-01-02 12:12:10 +00:00
uart_cpu_x86.c	uart_cpu_amd64.c and uart_cpu_i386.c (under sys/dev/uart) are	2012-04-11 02:42:01 +00:00
uart_dbg.c
uart_dev_imx.c	Fix crossed fingers output. Only comment changed.	2013-10-24 09:27:06 +00:00
uart_dev_imx5xx.h	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
uart_dev_lpc.c	Convert from using fdt_immr style to arm_devmap_add_entry() to make	2014-01-05 18:40:06 +00:00
uart_dev_ns8250.c	Wait for DesignWare UART transfers completion before accessing line control	2013-10-26 17:24:59 +00:00
uart_dev_ns8250.h	Make the uart ns8250 high-level interface public rather than static.	2013-08-21 14:26:15 +00:00
uart_dev_pl011.c	Calculate the baud rate divisor rather than using a hard-coded value.	2013-10-20 23:40:16 +00:00
uart_dev_quicc.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_dev_sab82532.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_dev_ti8250.c	Add support for uarts other than the serial console in TI OMAP SoCs.	2013-08-21 14:33:02 +00:00
uart_dev_z8530.c	Fix low-level uart drivers that set their fifo sizes in the softc too late.	2013-04-01 00:44:20 +00:00
uart_if.m	Complete polled-mode operation by using a callout if the device will be	2012-04-12 18:46:48 +00:00
uart_kbd_sun.c
uart_kbd_sun.h
uart_kbd_sun_tables.h
uart_subr.c	Teach UART to attach Exynos/s3/s5 class driver.	2013-06-29 23:48:08 +00:00
uart_tty.c	Plumb the cn_grab and cn_ungrab routines down into the uart	2013-12-21 16:23:31 +00:00