Adrian Chadd 1844ff169f * Reduce the PCU lock overhead a little by only re-acquiring it if we ... actually do have to reinitialise the RX side of things after an RX descriptor EOL error. * Revert a change of mine from quite a while ago - don't shortcut the RX initialisation path. There's a RX FIFO bug in the earlier chips (I'm not sure when it was fixed in this series, but it's fixed with the AR9380 and later) which causes the same RX descriptor to be written to over and over. This causes the descriptor to be marked as "done", and this ends up causing the whole RX path to go very strange. This should fixed the "kickpcu; handled X packets" message spam where "X" is consistently small.		2013-02-16 19:11:57 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	The encryption type field needs to be preserved for each descriptor	2013-02-09 02:42:01 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath.c	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_alq.h	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_beacon.c	Add a quick work-around if ath_beacon_config() to not die if it's called	2013-01-17 16:26:40 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx.c	* Reduce the PCU lock overhead a little by only re-acquiring it if we	2013-02-16 19:11:57 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_rx_edma.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-04 09:32:43 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement frame (data) transmission using if_transmit(), rather than	2013-01-15 18:01:23 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Pull out the debugging code from the critical path and make sure it	2012-11-28 01:55:22 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx.c	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00
if_ath_tx.h	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath_tx_edma.c	Methodize the process of adding the software TX queue to the taskqueue.	2013-02-07 02:15:25 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Fix a corner case that I noticed with the AR5416 (and it's currently	2013-02-08 09:07:03 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Add support for triggering spectral scan upon a channel reset/change.	2013-01-08 22:15:13 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00