Adrian Chadd fc4de9b7fc Update the TSF and next-TBTT methods to work for the AR5416 and later NICs. ... This is another commit in a series of TDMA support fixes for the 11n NICs. * Move ath_hal_getnexttbtt() into the HAL; write methods for it. This returns a timer value in TSF, rather than TU. * Move ath_hal_getcca() and ath_hal_setcca() into the HAL too, where they likely now belong. * Create a new HAL capability: HAL_CAP_LONG_RXDESC_TSF. The pre-11n NICs write 15 bit TSF snapshots into the RX descriptor; the AR5416 and later write 32 bit TSF snapshots into the RX descriptor. * Use the new capability to choose between 15 and 31 bit TSF adjustment functions in ath_extend_tsf(). * Write ar5416GetTsf64() and ar5416SetTsf64() methods. ar5416GetTsf64() tries to compensate for TSF changes at the 32 bit boundary. According to yin, this fixes the TDMA beaconing on 11n chipsets and TDMA stations can now associate/talk, but there are still issues with traffic stability which need to be investigated. The ath_hal_extendtsf() function is also used in RX packet timestamping; this may improve adhoc mode on the 11n chipsets. It also will affect the timestamps seen in radiotap frames. Submitted by: Kang Yin Su <cantona@cantona.net> Approved by: re (kib)		2011-09-08 01:23:05 +00:00
..
ah_regdomain	These two are ath_hal regulatory domain updates from the Atheros	2011-07-20 12:46:58 +00:00
ar5210	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar5211	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar5212	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar5312	Re-introduce a global ath_hal_debug again for now, whilst I figure out what	2011-06-23 06:55:29 +00:00
ar5416	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar9001	Break out the PLL setup into (mostly) per-chip methods, rather than	2011-07-21 08:35:10 +00:00
ar9002	Undo this for now. It's "right", but it means everything will rely on	2011-08-03 23:57:38 +00:00
ah.c	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ah.h	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ah_debug.h	Add a new flag - HAL_DEBUG_UNMASKABLE - which always logs a debug message	2011-05-11 13:22:41 +00:00
ah_decode.h	Add some more OS_MARK probes to the RX DMA setup/teardown code path.	2011-04-07 13:14:51 +00:00
ah_desc.h	Add some more phyerr bits.	2011-07-31 03:33:02 +00:00
ah_devid.h	Merlin -> Kiwi	2011-05-26 09:16:09 +00:00
ah_diagcodes.h	Reserve a new diagnostic code for the channel survey code I'll add soon.	2011-03-19 14:37:13 +00:00
ah_eeprom.h	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom_9287.c	Prepare for embedded use of the AR9285/AR9287.	2011-07-30 13:37:38 +00:00
ah_eeprom_9287.h	Make sure the extended regdomain word is initialised.	2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v3.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v4k.c	Remove the EEPROM minor >= 19 check for txgaintype; that's only needed for	2011-08-03 06:51:14 +00:00
ah_eeprom_v4k.h	Bring over a pdadc calibration fix from ath9k - unused power detector	2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_internal.h	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ah_regdomain.c	Bitten again by the optional HALDEBUG compilation.	2011-08-08 18:05:22 +00:00
ah_regdomain.h	Migrate the regulatory database definitions into separate header files	2011-03-10 03:13:56 +00:00
ah_soc.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00