Navdeep Parhar 43b5712444 cxgbe(4): Query Vdd from the firmware if its last known value is 0. ... TVSENSE may not be ready by the time t4_fw_initialize returns and the firmware returns 0 if the driver asks for the Vdd before the sensor is ready. MFC after: 1 week Sponsored by: Chelsio Communications		2019-11-08 01:13:12 +00:00
..
common	cxgbe(4): Use correct size while converting lpacaps32 to native	2019-10-31 00:35:26 +00:00
crypto	Set the FID field in lookaside crypto requests to the rx queue ID.	2019-10-08 20:22:05 +00:00
cudbg	cxgbe(4): Fix unsafe mailbox access in cudbg.	2017-11-21 01:18:58 +00:00
cxgbei	Mechanically convert INP_INFO_RLOCK() to NET_EPOCH_ENTER().	2019-11-07 00:08:34 +00:00
firmware	cxgbe(4): Treat the viid as an opaque identifier.	2019-03-20 17:27:11 +00:00
iw_cxgbe	cxgbe(4): Use correct FetchBurstMin values for T6.	2019-10-25 21:53:05 +00:00
tom	Mechanically convert INP_INFO_RLOCK() to NET_EPOCH_ENTER().	2019-11-07 00:08:34 +00:00
adapter.h	Split Chelsio send tags into a generic base tag and a ratelimit tag.	2019-10-22 20:41:54 +00:00
if_cc.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_ccv.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_cxl.c	cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as	2015-02-06 01:10:04 +00:00
if_cxlv.c	Chelsio T4/T5 VF driver.	2016-09-07 18:13:57 +00:00
offload.h	Split Chelsio send tags into a generic base tag and a ratelimit tag.	2019-10-22 20:41:54 +00:00
osdep.h	cxgbe(4): Add adapter information to messages logged by the OS-agnostic	2019-01-29 00:49:12 +00:00
t4_clip.c	cxgbe(4): Do not issue mbox commands after t4_fw_bye.	2018-12-19 19:21:29 +00:00
t4_clip.h	Move CLIP table handling out of TOM and into the base driver.	2018-11-29 01:15:53 +00:00
t4_filter.c	Always allocate the atid table during attach.	2019-10-22 20:01:47 +00:00
t4_if.m	Use the port device name for the iov device for Chelsio T4/T5 cards.	2016-08-03 17:11:08 +00:00
t4_ioctl.h	cxgbe(4): Allow "pass" filters to distribute matching traffic using a	2018-10-25 14:37:26 +00:00
t4_iov.c	cxgbe(4): Update the VF device ids too. This should have been part	2017-05-05 16:52:25 +00:00
t4_l2t.c	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_l2t.h	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_main.c	cxgbe(4): Query Vdd from the firmware if its last known value is 0.	2019-11-08 01:13:12 +00:00
t4_mp_ring.c	cxgbe(4): Use fcmpset instead of cmpset when appropriate.	2018-08-23 16:24:27 +00:00
t4_mp_ring.h	cxgbe(4): major tx rework.	2014-12-31 23:19:16 +00:00
t4_netmap.c	cxgbe(4): Use correct FetchBurstMin values for T6.	2019-10-25 21:53:05 +00:00
t4_sched.c	Split Chelsio send tags into a generic base tag and a ratelimit tag.	2019-10-22 20:41:54 +00:00
t4_sge.c	cxgbe(4): Use correct FetchBurstMin values for T6.	2019-10-25 21:53:05 +00:00
t4_smt.c	cxgbe(4): Move all control queues to the adapter.	2018-08-11 21:10:08 +00:00
t4_smt.h	cxgbe(4): Retire an old check.	2018-06-01 01:05:34 +00:00
t4_tracer.c	sys/dev: further adoption of SPDX licensing ID tags.	2017-11-27 14:52:40 +00:00
t4_vf.c	cxgbev(4): Enable 32b port capabilities in the VF driver.	2019-03-02 04:39:59 +00:00