Rui Paulo 8cfbb9cf03 Add a driver for the TI Programmable Realtime Unit Subsystem. ... This is only a userland accessibility driver. It mmaps the hardware region to userland and posts interrupt notifications via kqueue.		2013-11-16 08:23:15 +00:00
..
allwinner	Switch allwinner A10/A20 and rockchip ports to use common ARMv6/v7 bus_space tag.	2013-11-06 10:31:52 +00:00
arm	Eliminate an unused macro.	2013-11-08 16:56:13 +00:00
at91	Move remaining code and data related to static device mapping into the	2013-11-04 22:45:26 +00:00
broadcom/bcm2835	As all the IIC controllers on system uses the same 'iichb' prefix we cannot	2013-11-12 13:34:07 +00:00
conf	Add support for Freescale Vybrid Family VF600 heterogeneous	2013-11-12 18:02:56 +00:00
econa	Remove an incorrectly copied and pasted clause from these license	2013-11-15 16:16:55 +00:00
freescale	Add support for Freescale Vybrid Family VF600 heterogeneous	2013-11-12 18:02:56 +00:00
include	As of r257209, all architectures have defined VM_KMEM_SIZE_SCALE. In other	2013-11-08 16:25:00 +00:00
lpc	Call initarm_lastaddr() later in the init sequence, after establishing	2013-11-05 02:57:34 +00:00
mv	Teach nexus(4) about Open Firmware (e.g. FDT) on ARM and MIPS, retiring	2013-11-05 13:48:34 +00:00
rockchip	Switch allwinner A10/A20 and rockchip ports to use common ARMv6/v7 bus_space tag.	2013-11-06 10:31:52 +00:00
s3c2xx0	Move remaining code and data related to static device mapping into the	2013-11-04 22:45:26 +00:00
sa11x0	Move remaining code and data related to static device mapping into the	2013-11-04 22:45:26 +00:00
samsung/exynos	o Use common ARMv6/v7 bus_space tag.	2013-11-13 16:17:05 +00:00
tegra	Call initarm_lastaddr() later in the init sequence, after establishing	2013-11-05 02:57:34 +00:00
ti	Add a driver for the TI Programmable Realtime Unit Subsystem.	2013-11-16 08:23:15 +00:00
versatile	Call initarm_lastaddr() later in the init sequence, after establishing	2013-11-05 02:57:34 +00:00
xilinx	Call initarm_lastaddr() later in the init sequence, after establishing	2013-11-05 02:57:34 +00:00
xscale	Move remaining code and data related to static device mapping into the	2013-11-04 22:45:26 +00:00