opnsense-src/sys/mips/conf
Sean Bruno 1a8177b128 Add CAPABILITIES to the ERL kernel config so that tools that have been
modified with Capsicum work on this target platform.

This came up after the conversion of wc(8).
2018-11-28 13:25:10 +00:00
..
ADM5120.hints
ALFA_HORNET_UB [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
ALFA_HORNET_UB.hints Add a configuration file and hints file for the Alfa Networks Hornet UB 2013-10-25 04:06:54 +00:00
AP91 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
AP91.hints Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards. 2012-11-07 22:46:30 +00:00
AP93 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
AP93.hints [AP93] fix up the arge0/arge1 hints. 2017-05-29 07:57:01 +00:00
AP94 Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
AP94.hints Introduce configuration files for AP94 and AP96. 2012-04-13 08:52:25 +00:00
AP96 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
AP96.hints Update AP96 to directly attach an arswitch. 2012-11-07 23:50:28 +00:00
AP121 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
AP121.hints Add the basic GPIO pin mapping to the hints file. 2013-04-05 02:15:10 +00:00
AP135 [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
AP135.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AP143 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
AP143.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AR71XX_BASE Remove redundant device ar71xx_wdog which is now included from 2018-07-05 17:11:55 +00:00
AR71XX_BASE.hints Break out the AR71XX config file into _BASE and board specific 2011-12-29 05:51:48 +00:00
AR91XX_BASE.hints * Add in the gpio/gpioled drivers into AR91XX_BASE. 2011-12-15 01:05:38 +00:00
AR724X_BASE.hints Create a skeleton AR724x SoC board configuration for use by AR724x devices. 2012-08-26 04:36:59 +00:00
AR933X_BASE.hints [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. 2018-02-01 21:58:52 +00:00
AR934X_BASE.hints [ar71xx] Start migrating the AR934x based boards over to the new world order. 2017-07-06 04:06:25 +00:00
AR5312_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
AR5315_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
BCM bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4) 2017-11-22 23:10:20 +00:00
BCM.hints bhnd(4): Implement NVRAM support required for PMU bring-up. 2016-08-16 21:32:05 +00:00
BERI_DE4.hints Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_DE4_BASE Convert atse(4) driver for Altera Triple-Speed Ethernet MegaCore to use 2018-04-13 15:59:24 +00:00
BERI_DE4_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_DE4_SDROOT Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_NETFPGA_MDROOT Rename BERI_TEMPLATE to std.BERI to be more like other configs. 2017-02-21 17:34:27 +00:00
BERI_SIM_BASE Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_SIM_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_SDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_VIRTIO Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SOCKIT kernel: Fix several typos and minor errors 2017-12-27 03:23:21 +00:00
BERI_TPAD.hints Add reference kernel configurations for FreeBSD/beri in simulation, on the 2012-08-25 12:02:13 +00:00
CANNA Add jz4780 AIC (Audio Interface Controller) driver. 2016-12-20 18:27:53 +00:00
CARAMBOLA2 [mips] default AR933x/AR934x to include mips24k hwpmc and limit umtx chain memory wastage. 2017-05-03 05:45:43 +00:00
CARAMBOLA2.hints [ar933x] make carambola2 work again! 2017-07-23 07:10:41 +00:00
CI20 Add jz4780 AIC (Audio Interface Controller) driver. 2016-12-20 18:27:53 +00:00
DB120 [ar71xx] New world order - don't reference ath_pci here, it's a module now 2018-02-05 04:46:36 +00:00
DB120.hints [ar71xx] Fix DB120 AHB device hints in the new world order. 2018-02-05 04:48:41 +00:00
DEFAULTS Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported 2012-03-06 20:01:25 +00:00
DIR-655A1 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
DIR-655A1.hints Update the board MAC address configuration for the DIR-655A1. 2015-04-05 20:56:51 +00:00
DIR-825B1 Remove duplicate configuration values as they are already defined in 2018-07-06 13:31:06 +00:00
DIR-825B1.hints Migrate these configs to use the geom map search function. 2015-03-21 06:18:25 +00:00
DIR-825C1 [mips] make this compile again after all of the config changes. 2017-06-29 03:57:22 +00:00
DIR-825C1.hints [atheros] Fix DIR-825C1 to use the new hints. 2018-02-01 22:01:11 +00:00
ENH200 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
ENH200.hints Oops - fix bad hint numbering for the ART section. 2013-07-04 08:42:20 +00:00
ERL Add CAPABILITIES to the ERL kernel config so that tools that have been 2018-11-28 13:25:10 +00:00
GXEMUL With r181803 on 2008-08-17 23:27:27Z the first VIMAGE commit went into 2017-10-20 21:40:59 +00:00
GXEMUL.hints Merge a rudimentary gxemul "oldtestmips" port. This consists almost 2012-05-02 08:10:15 +00:00
GXEMUL32 With r181803 on 2008-08-17 23:27:27Z the first VIMAGE commit went into 2017-10-20 21:40:59 +00:00
IDT.hints
JZ4780 Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
JZ4780.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
MALTA Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MALTA.hints
MALTA64 Enable /usr/lib32 for o32 binaries on mips64. 2017-01-06 23:30:54 +00:00
MALTA64EL Re-enable kernel modules for the MALTA64EL kernel configuration. 2018-09-06 19:21:31 +00:00
MALTAEL Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MT7620.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
MT7620A_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7620N_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7621_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7628_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
OCTEON1 Remove all the really old junk that never would be used with an OCTEON 2018-10-21 07:56:58 +00:00
OCTEON1.hints Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive 2010-07-20 19:25:11 +00:00
ONIONOMEGA [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
ONIONOMEGA.hints Add I2C device hints for Onion Omega 2017-02-09 15:16:08 +00:00
PB47 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
PB47.hints Add a configuration file for the Atheros PB47 reference board. 2011-12-30 09:48:35 +00:00
PB92 In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
PB92.hints Add nvram2env (untested) and geom_map (tested) to PB92. 2011-05-05 09:04:49 +00:00
PICOSTATION_M2HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
PICOSTATION_M2HP.hints Fix arge0 mdio bus 2017-02-28 21:39:08 +00:00
QCA953X_BASE [atheros] Update QCA953x support to use the new hints. 2018-02-01 22:01:53 +00:00
QCA953X_BASE.hints [atheros] Update QCA953x support to use the new hints. 2018-02-01 22:01:53 +00:00
QCA955X_BASE.hints [atheros] Teach the QCA955x SoC code about the new hints stuff. 2018-02-01 22:00:05 +00:00
ROCKET_M2HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
ROCKET_M2HP.hints Add Ubiquiti Rocket M support 2017-02-28 22:49:45 +00:00
ROUTERSTATION Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
ROUTERSTATION.hints Add the default hints to make the GPIO pins, rf led and reset switch work 2013-08-28 14:43:04 +00:00
ROUTERSTATION_MFS Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
RSPRO Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
RSPRO.hints Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards. 2012-11-07 22:46:30 +00:00
RSPRO_MFS Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
RSPRO_STANDALONE In kernel config files, it is supposed to be 'options<space><tab>' not 2014-03-18 14:41:18 +00:00
RT305X.hints Include device rt in RT305X config. 2011-07-14 11:53:23 +00:00
RT2880_FDT [mips] [rt2880] Add oldest Ralink MIPS SOC RT2880 support code. 2017-05-06 06:20:34 +00:00
RT3050_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT3352_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT3883_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT5350.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
RT5350_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
SENTRY5 bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4) 2017-11-22 23:10:20 +00:00
SENTRY5.hints bhnd(4): Implement NVRAM support required for PMU bring-up. 2016-08-16 21:32:05 +00:00
std.AR91XX [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
std.AR724X [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
std.AR933X [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. 2018-02-01 21:58:52 +00:00
std.AR934X [ar71xx] AR934x is a MIPS74k board - use the right hwpmc module 2018-02-05 04:47:13 +00:00
std.AR5312 In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
std.AR5315 In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
std.AR_MIPS_BASE Remove redundant AH_DEBUG_ALQ. 2018-07-05 17:09:46 +00:00
std.BERI Switch BERI Programmable Interrupt Controller to INTRNG. 2017-04-18 17:20:03 +00:00
std.MALTA Make ZSTD a real option via ZSTDIO. 2018-07-05 17:07:23 +00:00
std.QCA955X [atheros] Teach the QCA955x SoC code about the new hints stuff. 2018-02-01 22:00:05 +00:00
std.SWARM In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
std.XLP Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust 2017-08-13 22:07:42 +00:00
SWARM Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM.hints Add config file for SWARM board, a sybyte SB-1-based board by 2009-07-05 08:40:26 +00:00
SWARM64 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM64_SMP In kernel config files, it is supposed to be 'options<space><tab>' not 2014-03-18 14:41:18 +00:00
SWARM_SMP In kernel config files, it is supposed to be 'options<space><tab>' not 2014-03-18 14:41:18 +00:00
TL-ARCHERC7V2 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
TL-ARCHERC7V2.hints Add initial support for the TP-Link Archer C7 v2. 2015-07-03 06:09:56 +00:00
TL-WDR4300 [ar71xx] get rid of ath_pci - it's built as a module now. 2017-07-28 01:17:38 +00:00
TL-WDR4300.hints [ar71xx] Fix the TL-wdr3600/tl-wdr4300 hints in the new world order. 2018-02-07 09:35:47 +00:00
TL-WR740Nv4 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
TL-WR740Nv4.hints Add support for the TP-Link TL-WR740N v4. 2015-10-22 08:08:06 +00:00
TL-WR1043NDv2 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
TL-WR1043NDv2.hints Migrate the TL-WR1043nd v2 to use the new map based MAC hints mechanism. 2015-04-01 06:44:39 +00:00
TP-MR3020 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
TP-MR3020.hints Correctly use the default values for location of MAC addrs of arge0, 2015-10-18 04:50:51 +00:00
TP-MR3040 Add kernel support for the TP-LINK MR3040. 2017-03-01 05:53:53 +00:00
TP-MR3040.hints Add kernel support for the TP-LINK MR3040. 2017-03-01 05:53:53 +00:00
TP-WN1043ND [mips] fix compilation of TP-WN1043ND kernel configuration 2017-12-26 19:50:23 +00:00
TP-WN1043ND.hints Fix the geom mappings for WR1043ND. 2014-01-07 13:09:35 +00:00
WZR-300HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
WZR-300HP.hints Set correct argemdio addr, comment out arge1 as its not physically 2015-10-04 22:50:37 +00:00
WZR-HPAG300H Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
WZR-HPAG300H.hints Switch is an 8316, so make the comments say that. 2014-12-03 23:37:23 +00:00
X1000 Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
X1000.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
XLP Update several more URLs 2017-10-29 08:17:03 +00:00
XLP.hints Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust 2017-08-13 22:07:42 +00:00
XLP64 Update several more URLs 2017-10-29 08:17:03 +00:00
XLPN32 Update several more URLs 2017-10-29 08:17:03 +00:00