mirror of
https://github.com/opnsense/src.git
synced 2026-04-20 21:59:20 -04:00
aa37baf3d7
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
|
||
|---|---|---|
| .. | ||
| ow.c | ||
| ow.h | ||
| ow_temp.c | ||
| owc_gpiobus.c | ||
| owll.h | ||
| owll_if.m | ||
| own.h | ||
| own_if.m | ||
| README.txt | ||
Quick Design Document for 1-wire bus In new bus terms, 1-wire devices are attached to 1-wire buses (ow) which are attached to a one wire bridge (owc). The implementation follows the terminology used in the Maxim AN927 Application note which defines the 1-wire bus as implemented for the iButton product. This is considered to be the canonical definition of the 1-wire bus. This means that the 1-wire bridge will implement the owll(9) interface. ow is one wire. ll is for Link Level to mirror the ISO stack terminology used by AN927. The 1-wire bus is implemented in the ow(4) device, which implements the own(9) interface (n for network, the layer described in the AN927). The presentation layer and above is the responsibility of the client device drivers to implement. Client drivers may only call the own(9) interface. The ow(4) driver calls the owll(9) interface and implements the own(9). $FreeBSD$