opnsense-src/sys/dev/mii/rdcphy.c
Pedro F. Giffuni 718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

236 lines
6 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2010, Pyun YongHyeon <yongari@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the RDC Semiconductor R6040 10/100 PHY.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/rdcphyreg.h>
#include "miibus_if.h"
static device_probe_t rdcphy_probe;
static device_attach_t rdcphy_attach;
struct rdcphy_softc {
struct mii_softc mii_sc;
int mii_link_tick;
#define RDCPHY_MANNEG_TICK 3
};
static device_method_t rdcphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, rdcphy_probe),
DEVMETHOD(device_attach, rdcphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static devclass_t rdcphy_devclass;
static driver_t rdcphy_driver = {
"rdcphy",
rdcphy_methods,
sizeof(struct rdcphy_softc)
};
DRIVER_MODULE(rdcphy, miibus, rdcphy_driver, rdcphy_devclass, 0, 0);
static int rdcphy_service(struct mii_softc *, struct mii_data *, int);
static void rdcphy_status(struct mii_softc *);
static const struct mii_phydesc rdcphys[] = {
MII_PHY_DESC(RDC, R6040),
MII_PHY_END
};
static const struct mii_phy_funcs rdcphy_funcs = {
rdcphy_service,
rdcphy_status,
mii_phy_reset
};
static int
rdcphy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, rdcphys, BUS_PROBE_DEFAULT));
}
static int
rdcphy_attach(device_t dev)
{
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &rdcphy_funcs, 1);
return (0);
}
static int
rdcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct rdcphy_softc *rsc;
struct ifmedia_entry *ife;
rsc = (struct rdcphy_softc *)sc;
ife = mii->mii_media.ifm_cur;
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
mii_phy_setmedia(sc);
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_100_TX:
case IFM_10_T:
/*
* Report fake lost link event to parent
* driver. This will stop MAC of parent
* driver and make it possible to reconfigure
* MAC after completion of link establishment.
* Note, the parent MAC seems to require
* restarting MAC when underlying any PHY
* configuration was changed even if the
* resolved speed/duplex was not changed at
* all.
*/
mii->mii_media_status = 0;
mii->mii_media_active = IFM_ETHER | IFM_NONE;
rsc->mii_link_tick = RDCPHY_MANNEG_TICK;
/* Immediately report link down. */
mii_phy_update(sc, MII_MEDIACHG);
return (0);
default:
break;
}
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
/*
* It seems the PHY hardware does not correctly
* report link status changes when manual link
* configuration is in progress. It is also
* possible for the PHY to complete establishing
* a link within one second such that mii(4)
* did not notice the link change. To workaround
* the issue, emulate lost link event and wait
* for 3 seconds when manual link configuration
* is in progress. 3 seconds would be long
* enough to absorb transient link flips.
*/
if (rsc->mii_link_tick > 0) {
rsc->mii_link_tick--;
return (0);
}
}
break;
}
/* Update the media status. */
PHY_STATUS(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
rdcphy_status(struct mii_softc *sc)
{
struct mii_data *mii;
struct ifmedia_entry *ife;
int bmsr, bmcr, physts;
mii = sc->mii_pdata;
ife = mii->mii_media.ifm_cur;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
physts = PHY_READ(sc, MII_RDCPHY_STATUS);
if ((physts & STATUS_LINK_UP) != 0)
mii->mii_media_status |= IFM_ACTIVE;
bmcr = PHY_READ(sc, MII_BMCR);
if ((bmcr & BMCR_ISO) != 0) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if ((bmcr & BMCR_LOOP) != 0)
mii->mii_media_active |= IFM_LOOP;
if ((bmcr & BMCR_AUTOEN) != 0) {
if ((bmsr & BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
}
switch (physts & STATUS_SPEED_MASK) {
case STATUS_SPEED_100:
mii->mii_media_active |= IFM_100_TX;
break;
case STATUS_SPEED_10:
mii->mii_media_active |= IFM_10_T;
break;
default:
mii->mii_media_active |= IFM_NONE;
return;
}
if ((physts & STATUS_FULL_DUPLEX) != 0)
mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc);
else
mii->mii_media_active |= IFM_HDX;
}