Navdeep Parhar b47b28e5b2 cxgbe(4): Add flag to reliably stop the driver from accessing hw stats. ... There are two kinds of routines in the driver that read statistics from the hardware: the cxgbe_* variants read the per-port MPS/MAC registers and the vi_* variants read the per-VI registers. They can be called from the 1Hz callout or if_get_counter. All stats collection now takes place under the callout lock and there is a new flag to indicate that these routines should not access any hardware register. MFC after: 2 weeks Sponsored by: Chelsio Communications		2021-04-22 17:45:52 -07:00
..
common	cxgbe(4): Allow a T6 adapter to switch between TOE and NIC TLS mode.	2021-03-25 12:39:41 -07:00
crypto	ccr: Disable requests on port 1 when needed to workaround a firmware bug.	2021-03-12 10:59:35 -08:00
cudbg	cxgbe(4): unimplemented cudbg routines should return the correct	2020-10-14 08:04:39 +00:00
cxgbei	cxgbe: Add a struct sge_ofld_txq type.	2021-03-26 15:19:58 -07:00
firmware	cxgbe(4): Allow a T6 adapter to switch between TOE and NIC TLS mode.	2021-03-25 12:39:41 -07:00
iw_cxgbe	cxgbe: Add a struct sge_ofld_txq type.	2021-03-26 15:19:58 -07:00
tom	cxgbe/t4_tom: Implement tod_pmtu_update.	2021-04-22 14:48:57 -07:00
adapter.h	cxgbe(4): Add flag to reliably stop the driver from accessing hw stats.	2021-04-22 17:45:52 -07:00
if_cc.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_ccv.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_cxl.c	cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as	2015-02-06 01:10:04 +00:00
if_cxlv.c	Chelsio T4/T5 VF driver.	2016-09-07 18:13:57 +00:00
offload.h	cxgbe/t4_tom: Implement tod_pmtu_update.	2021-04-22 14:48:57 -07:00
osdep.h	cxgbe(4): make the logging helpers a little more robust.	2021-04-22 15:28:43 -07:00
t4_clip.c	cxgbe: Ignore doomed virtual interfaces when updating the clip table.	2021-04-12 14:36:40 -07:00
t4_clip.h	Move CLIP table handling out of TOM and into the base driver.	2018-11-29 01:15:53 +00:00
t4_filter.c	cxgbe(4): Add a driver ioctl to set the filter mask.	2021-02-19 14:23:58 -08:00
t4_if.m	Use the port device name for the iov device for Chelsio T4/T5 cards.	2016-08-03 17:11:08 +00:00
t4_ioctl.h	cxgbe(4): Add a driver ioctl to set the filter mask.	2021-02-19 14:23:58 -08:00
t4_iov.c	cxgbe(4): Allow the PF driver to set a VF's MAC address.	2020-11-09 00:08:35 +00:00
t4_l2t.c	NIC KTLS for Chelsio T6 adapters.	2019-11-21 19:30:31 +00:00
t4_l2t.h	NIC KTLS for Chelsio T6 adapters.	2019-11-21 19:30:31 +00:00
t4_main.c	cxgbe(4): Add flag to reliably stop the driver from accessing hw stats.	2021-04-22 17:45:52 -07:00
t4_mp_ring.c	cxgbe(4): changes in the Tx path to help increase tx coalescing.	2020-07-03 04:44:23 +00:00
t4_mp_ring.h	cxgbe(4): changes in the Tx path to help increase tx coalescing.	2020-07-03 04:44:23 +00:00
t4_netmap.c	cxgbe(4): use standard sysctl routines to deal with 16b values.	2021-03-19 10:56:24 -07:00
t4_sched.c	cxgbe(4): Fix min/max typo in r366958.	2020-10-23 02:24:43 +00:00
t4_sge.c	cxgbe(4): RSS hash for VXLAN traffic is computed from the inner frame.	2021-04-13 16:50:12 -07:00
t4_smt.c	cxgbe(4): Move all control queues to the adapter.	2018-08-11 21:10:08 +00:00
t4_smt.h	cxgbe(4): Retire an old check.	2018-06-01 01:05:34 +00:00
t4_tracer.c	sys/dev: further adoption of SPDX licensing ID tags.	2017-11-27 14:52:40 +00:00
t4_vf.c	cxgbe(4): Break up t4_read_chip_settings.	2021-02-18 01:22:42 -08:00